Page 1
A
⁄
›
fi
È
‚
fl
·
Â
‰
Á
¤
‡
Ê
„
Ë
‹
Í
Í
B
C
D
50:1 40:1 25:1
2% 2,5% 4%
1 ltr. 20 cm325 cm340 cm
3
4 80 100 160
5 100 125 200
10 200 250 400
20 400 500 800
Partner McCulloch 2T
oil oil oil
The Electrolux Group. The world’s No 1 choice.
Electrolux Outdoor Products
Via Como 72
23868 Valmadrera (Lecco)
ITALIA
Phone +39 0341 203111 - Fax +39 0341 581671
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and
trademarks in several countries.
© Electrolux Outdoor Products Italy
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million
Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are
sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
PN 248030 REV.02 (11/02)
VIRGINIA
MH542 P - MH555 P/25cc
HANDLEIDING
BELANGRIJKE IMPORTANTS: Lees deze handleiding
aandachtig en zorg dat u ailes begrijpt alvorens de kettingzaag
te gebrulken en be-waar ze voor toekomstige raadpleging.
BRUKSANVISNING
VIKTIG INFORMATION: Läs instruktionerna noggrant och
försäkra dig om att du förstår dem innan du använder
utrustningen och spara dem för framtida behov.
BRUGERHÅNDBOG
VIGTIGE OPLYSNINGER: Læs instruktionerne
omhyggeligt, før du bruger enheden og gemme til
senere henvisning.
LIBRETTO D’ISTRUZIONI
INFORMAZIONI IMPORTANTI: Leggere le istruzioni
attentamente e capirle bene prima di usare il
tagliasiepi. Conservare per ulteriore consultazione.
MANUAL DO OPERADOR
INFORMAÇÕES IMPORTANTES: Queira ler
cuidadosamente estas instruções e tenha certeza de
entendë--las antes de usar a serra e guarde para
consulta futura.
EΓXEIPI∆IO XEIPIΣMOE
ΣHMANTIKEΣ ΠΛHPOΦOPIEΣ:
∆ιαβάστε
πρoσεxτιxά αvτέσ τισ οδηγίεσ xαι Φρovτίστε vα τισ
xαταvoήσετε αvτ τo µηχάvηµα xαι Φuλάξτε το για
vα το σuµβοuλεύεστε στο µέλλοv.
OHJEKIRJA
TÄRKEÄÄ TIETOA: Lue nämä ohjeet huolellisesti ja
varmista, että olet ymmärtänyt ne, ennen kuin alat
käyttää tätä laitetta ja säilytä myöhempää tarvetta
varten.
GB
FI
PT
GR
IT
FR
DE
ES
NL
SE
DK
INSTRUCTION MANUAL
IMPORTANT INFORMATION: Please read these instructions
carefully and make sure you understand them before using
this unit. Retain these instructions for future reference.
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS: Avant d’utiliser cet
appareil, veuillez lire atentivement les instructions et
assurez-vous de les avoir comprises. Conservez les
instructions pour référence ultérieure.
BETRIEBSANWEISUNG
WICHTIGE INFORMATION: Lesen Sie diese Hinweise zur
Handha-bung des Geräts aufmerksam durch. Verwenden
Sie es erst, wenn Sie sicher sind, daß Sie alle
Anweisungen verstanden haben und gut aufbewahren.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE: Lea atentamente las
instrucciones y asegúrese de entenderlas antes de
utilizar esta aparato. Conserve las instrucciones para la
referencia en el futuro.
Page 2
E1 E2
E6
FA
FB
E7
E4 E5E3
L
H
I
G
H1
H2 H3
GB
Due to a constant product improvement programme, the factory
reserves the right to modify technical details mentioned in this
manual without prior notice.
DE
Im Sinne des Fortschritts behält sich der Hersteller das Recht
vor,
technische Änderungen ohne vorherigen Hinweis
durchzuführen.
FR
La Maison se réserve la possibilité de changer des
caractéristiques et des données de ce manuel à n’importe quel
moment et sans préavis.
NL
Door konstante produkt ontwikkeling behoud de fabrikant zich
het recht voor om rechnische specificaties zoals vermeld in deze
handleiding te veranderen zonder biervan vooraf bericht te
geven.
FI
Jatkuvan tuotteen parannusohjelman tähden valmistaja pidättää
oikeuden vaihtaa ilman ennakkovaroitusta tässä ohjekirjasessa
mainittuja teknisiä yksityiskohtia.
SE
Tilverkaren reserverar sig rätten att ändra fakta och uppgifter ur
handboken utan förvarning.
DK
Producenten forbeholder sig ret til ændringer, hvad angår
karakteristika og data i nærværende instruktion, når som helst
og uden varsel.
ES
La firma productora se reserva la posibilidad de cambiar las
características y datos del presente manual en cualquier
momento y sin previo aviso.
PT
A casa productora se reserva a possibilidade de variar
características e dados do presente manual em qualquer
momento e sen aviso prévio.
IT
La casa produttrice si riserva la possibilità di variare
caratteristiche e dati del presente manuale in qualunque
momento e senza preavviso.
GR
Λγω προγράµµατοσ συνεχούσ βελτίωσησ προϊντων, το
εργοστάσιο επιφυλάσσεται του δικαιώµατοσ να
τροποποιεί τισ τεχνικέσ λεπτοµέρειεσ που αναφέρονται
στο εγχειρίδιο αυτ χωρίσ προηγούµενη ειδοποίηση.
DE
CE Konformitätserklärung
F
EG Conformiteitsverklaring
FR
Déclaration de conformité Européenne
FI
EY Julistus Vastaavuudesta
@ ∆ήλωση Συµµρφωσης προς τις Eντολές της EE
PT Declaração de Conformidade
: EU Overensstemmelseerklæring
SE
EG-försäkran om överensstämmelse
Valmadrera, 15.12.01
Pino Todero (Direttore Tecnico)
E.O.P.I.
A EC Declaration of Conformity
IT Dichiarazione di Conformità CE
ES
Declaracion de cumplimiento de la directriz de la UE
The undersigned, authorised by E.O.P.I., declares that the
following products:
Virginia MH 542P - 555P, manufactured by
E.O.P.I., Valmadrera, Italia, are in accordance with the European
Directives 98/37/EEC (Machinery Directive), 93/68/CEE (CE
Marking Directive) & 89/336/CEE (Directive on electromagnetic
compatibility), directive 2000/14/CEE (Annex V).
Le soussigné, dûment mandaté par E.O.P.I., déclare que les
produits suivants:
Virginia MH 542P - 555P, fabriqués par
E.O.P.I., Valmadrera, Italia, sont conformes aux Directives
Européennes 98/37/EEC (Directive Sécurité Machine),
93/68/CEE (Directive Marquage CE) & 89/336/CEE (Directive
EMC), directive 2000/14/CEE (Annexe V).
Der Unterzeichnete, bevollmächtigt durch E.O.P.I., erklärt,
daß folgende Geräte: Virginia MH 542P - 555P,
hergestellt durch E.O.P.I., Valmadrera, Italia, den
Europäischen Richtlinien
98/37/EEC (Maschinenrichtlinie),
93/68/CEE (CE Kennzeichnungsrichtlinie) & 89/336/CEE
(EMV Richtlinie) entsprechen, richtlinie 2000/14/CEE
(Anhang V).
Il sottoscritto, autorizzato dalla E.O.P.I., dichiara che i seguenti
prodotti: Virginia MH 542P - 555P, costruito da E.O.P.I.,
Valmadrera, Italia, sono conformi alle Direttive Europee:
98/37/EEC (Direttiva Macchine), 93/68/CEE (Direttiva
Marcatura CEE) &
89/336/CEE (Direttiva Compatibilità
Elettromagnetica), direttiva 2000/14/CEE (Allegato V).
El abajo firmante, autorizado por E.O.P.I., afirma que los
siguientes productos:
Virginia MH 542P - 555P, fabricados
por E.O.P.I., Valmadrera, Italia, cumplen con las directivas
Europeas
98/37/EEC (Directiva sobre Maquinaria),
93/68/CEE (Directiva sobre Marcas de la CE) & 89/336/CEE
(Directiva sobre ‘Compatibilidad Electro Magnética’),
directiva
2000/14/CEE (Anexo V).
Ondergetekende, gemachtigd door E.O.P.I., verklaart dat de
volgende produkten: Virginia MH 542P - 555P, geproduceerd door
E.O.P.I., Valmadrera, Italia voldoen aan de Europese Richtlijnen
98/37/CEE (Machinerie Richtlijn), 93/68/CEE (EG Markering
Richtlijn) & 89/336/CEE (Richtlijn aangaande elektromagnetische
compatibiliteit), richtlijn 2000/14/CEE (Annex V).
O υπογεγραµµένοσ, µε eξουσιοδτηση τησ E.O.P.I., δηλώνει τι
τα εξήσ προϊντα:
Virginia MH 542P - 555P, κατασκευασθέντα
απ την
E.O.P.I., Valmadrera, Italia, HΠA ανταποκρίνονται προσ
τισ Eυρωπαϊκέσ Eντολέσ
98/37/CEE (η περί Mηχανηµάτων
Eντολή),
93/68/CEE (η περί του Σήµατοσ CE Eντολή) &
89/336/CEE (η περί Hλεκτροµαγνητικήσ Συµβαττητασ
Eντολή), Aηρεκτηβα
2000/14/CEE (Πρηπο επηε V).
O abaixo assinado, autorizado por E.O.P.I., declara que os seguintes
produtos:
Virginia MH 542P - 555P, fabricada por E.O.P.I.,
Valmadrera, Italia. estão de acordo com as Directivas Europeias
98/37/EEC Directiva de Maquinaria), 93/68/CEE (Directiva de
Marcação CE) e
89/336/CEE (Directiva de Compatibilidade
Electromagnética), directiva
2000/14/CEE (Apêndice V).
Allekirjoittanut, E.O.P.I. in valtuttaamana, vakuuttaa että
seuraavat tuotteet: Virginia MH 542P - 555P, ja jotka on
valmistanut E.O.P.I., Valmadrera, Italia, ovat Euroopan
direktiivien 98/37/EEC (Koneisto-direktiivi), 93/68/CEE
(CE Merkintä-direktiivi) & 89/336/CEE
(Elektromagneettinen Yhteensopivuus-direktiivi) mukainen,
direktiivi 2000/14/CEE (Liite V).
Undertegnede, bemyndiget af E.O.P.I., erklærer herved, at
følgende produkter:
Virginia MH 542P - 555P, E.O.P.I.,
Valmadrera, Italia, er i overensstemmelse med de eurpæiske
direktiver 98/37/EEC (Maskineri direktiv), 93/68/CEE (CE
mærkningsdirektiv) & 89/336/CEE (EMC-direktiv), direktiv
2000/14/CEE (Annex V).
Undertecknad, auktoriserad av E.O.P.I., försäkrar att följande
produkter: Virginia MH 542P - 555P, tillverkade av E.O.P.I.,
Valmadrera, Italia, är i överensstämmelse med följande
europeiska direktiv 98/37/EEC (Maskindirektiv), 93/68/CEE
(CE-märknings-direktiv) & 89/336/CEE (Elektromagnetisk
kompatibilitet), direktiv 2000/14/CEE (Annex V).
Page 3
ENGLISH - 1
Do not smoke while refuelling or while operating the trimmer
Choke fully opened
(hot start / run)
Wear safety clothing:
Approved safety glasses or face
shield
Wear safety clothing:
Approved ear defender
Wear safety clothing:
Approved safety helmet
Wear safety clothing:
Approved gloves
Wear safety clothing:
Approved safety footwear
If not used properly this Hedgetrimmer can be dangerous.
The warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product.The operator is responsible
for following the warnings and instructions in this manual and on the
product.
Warning
Read the user instructions carefully o make sure you understand all
the controls and what hey do.
Explanation of Symbols
Choke closed (cold start)
A. General description
Safety precautions
1) Trimmer blades
2) Blade guides
3) Fuel tank cap
4) Rear handle
5) Starter handle
6) Muffler shield/top cover
7) Spark plug boot/spark plug
8) Front handle
9) Throttle trigger
10) Ignition switch
11) Gear box assembly
12) Front hand guard
13) Air cleaner cover
14) Choke lever
15) Primer bulb
16) Safety trigger
17) Blade sheaths
Page 4
ENGLISH - 2
C .
Additional safety precautions
B. Safety precautions
D. Fuel mix
• This machine can cause serious injuries if
not used in the correct manner.
• If using the face shield, ensure you peel off the
protective films from the see-through plastic.
• Ensure all operators study this manual carefully and thoroughly before using the hedge
trimmer.
• Be familiar with all controls and the proper use
of this machine.
• As with all machinery, long hair, loose belts or
straps should be tied back or secured to avoid
possible contact or entanglement with moving
parts.
• Wear close-fitting protective clothes. Wear
safety shoes, gloves, goggles and ear protectors. Ensure you know how to stop the engine
in an emergency. Start the engine according
to these instructions.
• Stop the engine when changing location or
before examining the blades.
• Prolonged use of this or other machines
exposing the operator to vibration may produce Whitefinger’s Disease (Raynaud’s
Phenomenon). This may reduce the hands’
ability to feel and regulate temperature and
may produce general numbness. Continual or
regular users should therefore monitor closely
the condition of their hands or fingers. If any of
the symptoms appear, seek immediate medical advice.
• Do not operate this machine when tired or
under the influence of any substances such as
drugs or alcohol which can impair vision, dexterity or judgement.
• Carefully survey the working site to note any
hazards (eg road, paths, electricity cables,
dangerous trees, etc).
• Ensure other persons are at a safe working
distance (minimum distance of 10 metres).
• If necessary use warning signs to keep
onlookers at a safe distance.
• Ensure someone is nearby within a safe hear-
ing distance in case of an accident.
• When transporting or storing the machine
always fit the blade sheath
• Never allow children to use this machine
• Always hold the hedgetrimmer firmly with both
hands when the engine is running.
• Always maintain a firm foothold. Do not use
while standing on a ladder. Use properly
installed scaffolding to reach high places.
• Keep handles dry, clean and free from fuel
mixture.
• If fuel has spilt on unit, ensure engine has
dried completely before starting.
• Keep all parts of your body and clothing away
from blades when starting or running engine.
• When transporting the hedgetrimmer in a vehi-
cle, secure it to prevent fuel spillage.
Do not use any other type of fuel than the type
recommended in this manual.
This product is equipped with a two-stroke
engine and must therefore use a mixture of
lead-free gasoline (with a minimum of 90
octanes) and fully synthetic oil for two-stroke
engines, specific for lead-free gasoline in the
proportions indicated in the table on the cover
page at item (D).
IMPORTANT! Read the oil specifications on
the can carefully: the use of oil lacking the
specifications indicated in this manual can
cause severe damage to the engine!
To obtain the best mixture, pour the oil first, followed by the gasoline, into an approved container, shake well (repeat the operation every time
you draw any fuel from the container).
The characteristics of the mixture are subject to
aging and may be altered in time, so we recommend mixing only the amount strictly needed for
use. If you use a mixture that is several weeks
old, this could damage the engine.
WARNING
Do not smoke when re-fuelling.
Always open the fuel cap slowly, to release any
pressure build up in the tank.
Re-fuel in open spaces only, keeping away from
naked flames or sparks.
SAFE STORAGE OF FUEL
Petrol fuel mix is highly inflammable.
Put out all cigarettes, pipes and cigars before
working with fuel.
Avoid spilling fuel. Store fuel in a cool, well ventilated place, in an approved container specifically
designed for the purpose.
Never store engine with fuel in the tank in
Page 5
ENGLISH - 3
enclosed, poorly ventilated areas where fuel
fumes may reach an open flame, spark or pilot
light such as in a furnace, water heater, clothes
dryer etc. Petrol fumes can cause an explosion or
a fire. Never store large amounts of fuel.
To prevent possible restarting problems avoid
running the fuel tank dry.
This also helps to extend engine life.
F. Cutting instructions
E. Starting and stopping the engine
Starting a cold engine
1 Move stop switch to on position. Depress the
primer bulb 5 times.
2 Move choke lever to position.
3 Pull starter rope until engine fires once.
4 Move choke lever to
1
/
2
position.
5 Pull starter rope until engine fires. Allow
engine to warm up for 15 seconds.
6 Move choke lever to position.
7 To stop engine, push stop switch to stop
position.
If the engine fails to start repeat the above proce-
dure.
Starting a warm engine
1 Stop switch to on position.
2 Depress the primer bulb 5 times if the fuel
tank has run empty.
3 Ensure the choke is on position.
4 Pull starter handle until engine runs. Allow
engine to run for 15 seconds.
5 If the engine fails to start repeat points 4, 5
and 6 for ‘Starting a cold engine.’
• If unfamiliar with trimming or cutting tech-
niques, practice the procedure with engine in
‘Off’ position.
• Clear work area of debris such as cans, bot-
tles, rocks etc. Striking objects can cause serious injury to operator, bystanders and equipment. If an object is hit accidentally, immediately turn off engine and examine equipment.
• Always hold unit firmly with both hands,
thumbs and fingers encircling handles.
• Always trim or cut at high engine speeds. Do
not run engine slowly at start or during cutting
operations.
• Do not use this unit for purposes other than
trimming shrubs, hedges or bushes.
• Never raise hedgetrimmer above chest height
during operation.
• Do not operate unit with other people or ani-
mals in the immediate vicinity.
• Always ensure the handle and guard is fitted in
place when using the machine. Never attempt
to use an incomplete machine or one which
has been modified by anyone other than an
authorised service dealer.
Using your hedgetrimmer
• Your hedgetrimmer is equipped with a cen-
trifugal clutch so the cutting blades will stop
moving when the engine is at idle. If the
blades move when the engine is at idle, the
carburettor idle speed needs adjusting. If this
does not solve the problem, do not use the
hedgetrimmer - take it immediately to an
Authorised Service Agent.
• Always allow the engine to idle before moving
from one section of the bush or hedge to
another. Wait until blades stop moving. Before
resuming trimming, check that your stance is
correct.
• Always be sure of your footing. Do not over-
reach.
• Do not use hedgetrimmer while standing on a
ladder or other unstable surfaces. If trimming
tall hedges or bushes, use scaffolding which is
stable and secure.
• Do not operate the machine if the blades are
damaged or excessively worn.
• To reduce any fire hazard keep the engine and
muffler free of debris, leaves or excessive lubricant.
Trimming Procedures
WARNING: Wear heavy duty gloves when operating this unit.
There are two trimming procedures: Horizontal A
and Vertical B.
• The horizontal trimming position is used to cut
the top of bushes, shrubs or hedges. Always
trim from right to left. Do not use hedgetrimmer above chest height.
• The vertical trimming procedure is used to cut
the sides of bushes, shrubs and hedges.
Always cut from bottom to top.
1 Place right hand on rear handle assembly and
left hand on the front handle.
2 Trim area to be cut whilst squeezing throttle
trigger to maximum extent. When finished
release throttle trigger. Allow engine to return
to idle position. Blade action should stop.
Move to next section to be cut.
3 After moving to the next section, make sure
you are standing on firm ground, squeeze trigger to full extent and resume trimming.
Page 6
ENGLISH - 4
H. Regular maintenance
Technical data
G. Carburettor adjustment
Your machine is fitted with a highly sensitive
low emission carburettor. We therefore recommend that carburettor adjustments are only
made by an authorised servicing dealer,
equipped with instruments that will ensure
best performance with lowest emission levels.
To adjust the idle speed, however, proceed as follows:
With engine running and warm, slowly turn screw
‘I’ clockwise until the engine runs smoothly with a
consistent noise level but without making the
blade move.
If the cutting attachment does move or the engine
runs too fast, slowly turn screw ‘I’ in an anticlockwise direction until the correct speed is obtained.
Precise numerical engine speed settings are mentioned in the technical detail chart in the front of
the operator’s manual.
Warranty may be invalidated from incorrect
carburettor adjustment made by persons
other than an authorised dealer.
Every 10 work hours
1 Air filter cleaning
Never operate hedgetrimmer without the air filter, this will damage the engine.
• Remove the 2 air cleaner cover screws.
• Take off the air cleaner cover and remove air
filter from the back of the cover.
• Clean air filter in warm soapy water. DO NOT
USE PETROL.
• Allow filter to dry.
• Re-install filter.
Note: replace filter if torn or damaged.
2 Remove spark plug
• Clean and adjust electrodes setting.
Every 50 work hours
3 Change spark plug
Long storage
• Empty fuel tank and run engine dry.
Displacement (cc) 25
Bore 35
Stroke (mm) 26
Engine output din hp/kW 0.9/0.7
Engine speed at max power 8,000 - 9,000
Fuel tank capacity (cc) 370
Weight (Kg) 4.5/4.8
Sound pressure level (at the operator’s ear) LpAav (dBA) (ISO7917) 83/100dB(A)
Guaranteed noise level LwAav (dBA) (ISO 10884) 108
Measured sound power level LwAav (dBA) (ISO 10884) 106
Vibration levels recorded at the operators hand position idle/racing 4/8 m/s
2
Page 7
ENGLISH - 5
Fault finding
Engine will not start
• Check stop switch is in the correct position
• Check fuel level
Engine will not start or runs badly
• Check air filter is clean
• Remove sparkplug - dry, clean and adjust, and replace if necessary
• Have carburettor adjusted
Engine runs fast but loses power when working
• Have carburettor adjusted
• Change fuel filter
• Contact your dealer
Engine still gives trouble
• Contact your dealer
Note: Do not attempt to repair your machine unless you are qualified to do so.
Loading...