Model MC1375
Modelo MC1375 Modéle MC1375
Canister Steam System
Sistema A Vapor Con Depósito Nettoyeur-Chariot À Vapeur
Owner’s Guide Guía del Usuario Mode D’emploi
English p. 2
Español p. 22
Français p. 42
KEEP YOUR RECEIPT FOR WARRANTY PURPOSES
Please read all instructions before use.
GUARDE SU RECIBO A EFECTOS DE LA GARANTÍA
Lea todas las instrucciones antes de usarlo.
GARDEZ VOTRE REÇU AUX FINS DE LA GARANTIE
Veuillez lire toutes les instructions avant l’utilisation.
IMPORTANT SAFETY INSTRUCTIONS
!WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance.
READ ALL INSTRUCTIONS BEFORE USE
1.The Canister Steam System Boiler is designed to hold a maximum of 48 oz. (1,420 ml.) of water. Unplug electrical cord before filling with water.
2.DO NOT leave your Canister Steam System unattended when plugged in or not in use. Use only for its intended purpose as indicated in this manual.
3.This unit is not a toy. Close supervision is required when using unit near children, pets, and plants. Steam produced by unit is hot and pressurized. Care must be taken to avoid burns or other injuries. Never point nozzle at people or pets.
4.To reduce the risk of contact with hot water emitting from steam vents, hold appliance away from body and check for signs of condensation or leakage.
5.DO NOT use this unit if electrical cord or outlet is damaged. DO NOT use unit if it is not working properly or has been dropped, damaged or left outdoors. If such damage occurs, DO NOT disassemble or attempt repairs, take unit to a qualified service person for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electrical shock, or injury to persons when steam cleaner is used.
6.To reduce risk of electrical shock, DO NOT immerse in water or other liquids. DO NOT use electrical cord as a handle. DO NOT allow cord to be crimped by closing it in doors. DO NOT pull or stretch cord around sharp corners or edges.
7.Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing.
8.DO NOT use this unit with extension cords or electrical outlets that have inadequate current capacity. A three-prong outlet or a properly grounded adapter is necessary when using Canister Steam System.
9.In order to unplug Canister Steam System, grasp plug and pull smoothly and firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on cord.
10.Use caution, as burns could occur from touching hot metal parts, hot water or steam.
2 | ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
!WARNING: To reduce the risk of electrical shock, this appliance has a threepronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature.
11.The Canister Steam System is only meant to be used with recommended Canister Steam System accessories. Other types of attachments are not to be used with the Canister Steam System. Doing so may cause injuries or damage to unit.
12.Attachments become hot during use. To avoid injuries, DO NOT touch attachments while using this appliance. DO NOT attempt to change attachments while unit is emitting steam.
13.When filling your Canister Steam System, only water should be used in unit. Other cleaning agents will damage unit and can cause injuries.
14.DO NOT operate unit if steam opening is blocked. Should this occur, immediately cease usage and unplug from electrical outlet.
15.Store your Canister Steam System in a cool, dry place.
16.To avoid burns from escaping steam when removing Boiler Cap to refill unit: • Always allow unit to cool for 20 minutes. • Press and hold Steam Button to release ALL remaining steam.
SAVE THESE INSTRUCTIONS
for household use only
Questions or comments?
•www.mccullochsteam.com
•consumerservice@mccullochsteam.com
•1-800-711-6617
ENGLISH | 3
Product Information
These features and accessories are included with your Canister Steam System. To obtain additional parts, refer to Product Support on Page 19 of this manual.
UNIT FEATURES
110' Steam Hose
2Pressure Gauge
3Boiler Cap
4 |
Steam Handle Cradle |
1 |
5 |
Illuminated On/Off Switch |
4 |
6Steam Nozzle
7Steam Trigger Lock
8Steam Trigger
9 Steam Adjustment Knob
2 9
6
3
7
8
5
4 | ENGLISH
Product Information
•The 10' Steam Hose (1) safely channels the flow of steam from the Boiler to the Steam
Nozzle.
•The Pressure Gauge (2) measures the pressure in the Boiler.
•The Boiler Cap (3) is designed to safely contain steam inside the Boiler. The Boiler Cap must be unscrewed and removed in order to fill the Boiler with water.
•The Steam Handle Cradle (4) functions as a convenient holder for the Steam Nozzle.
•The Illuminated On/Off Switch (5) illuminates when the unit is powered On.
•The Steam Nozzle (6) emits a flow of hot, penetrating steam whenever the Steam Trigger is pressed and held.
•The Steam Trigger Lock (7) locks Steam Trigger to "on" position for continuous steam.
•The Steam Trigger (8) is pressed and held in order to start the flow of steam from the Steam
Nozzle, then released when you wish to stop.
•The Steam Adjustment Knob (9) adjusts steam intensity.
ENGLISH | 5
Product Information
|
|
ACCESSORIES |
|
|
|
|
|
|
|
|
11 |
2 |
|
1 |
|
2 - 16.5" Extension Wands |
|
|
||
|
|
|
|
|||
2 |
|
Microfiber Mop Pad |
|
|
|
|
3 |
|
Scrubbing Mop Pad |
12 |
Microfiber Mop Pad |
||
4 |
|
5.5" Jet Nozzle |
|
|
A1375-100 |
|
|
|
|
|
|||
5 |
|
Triangle Brush |
|
|
|
|
6 |
|
Large Brush |
|
13" x 8.5" Large Mop Head |
|
|
7 |
|
2 - 1.5" Nylon Utility Brushes |
|
|||
|
A1375-003-A |
|
|
|||
8 |
|
1.5" Brass Utility Brush |
3 |
|
||
|
|
|
||||
9 |
|
Angled Nozzle |
|
|
|
|
|
|
Bristle Brush Attachment |
|
|||
10 |
|
3" Scraper |
|
|
||
|
|
A1375-004 |
|
|
||
11 |
|
13" x 8.5" Large Mop Head |
Scrubbing Mop Pad |
|||
|
|
|||||
12 |
|
Bristle Brush Attachment |
|
|||
|
|
|
A1375-101 |
|||
13 |
|
Storage Bag |
|
|
|
|
|
|
|
|
|
||
14 |
|
Fill Cup |
|
|
|
|
15 |
|
Accessory Net |
|
4 |
10 |
|
16 |
|
2.5" Round Brush |
|
|||
|
|
|
|
|||
17 |
|
2 - 2.5" Round Scrub Pads |
|
|
|
|
|
|
|
|
5.5" Jet Nozzle |
3" Scraper |
|
|
|
|
|
|
||
|
|
|
|
A1230-001 |
A1230-009 |
|
|
|
Fill Cup |
|
|
|
1 |
|
|
A275-015 |
|
|
||
|
|
|
|
|
||
|
|
14 |
|
5 |
|
|
|
|
|
|
6 |
|
|
13 |
|
|
|
|
||
|
|
|
|
|
15 |
16.5" Extension |
|
|
|
|
|
Accessory Net |
|
|
|
|
|
|
Wands |
|
|
|
|
|
4" Triangle Brush |
A1375-005 |
|
|
|
|
|
A1375-002 |
||
|
|
|
|
A1230-002 |
|
|
|
|
|
|
|
|
|
|
|
Storage Bag |
6" x 4.5" Large Brush |
|
|
|
|
|
|
A1230-003 |
|
|
|
|
|
A1375-010 |
|
|
|
|
|
|
|
|
|
|
|
16 |
|
9 |
17 |
7 |
8 |
|
2.5" Round Brush |
Angled Nozzle |
2.5" Round Scrub Pads |
1.5" Nylon Utility |
1.5" Brass Utility |
||
A1350-001 |
A1375-001 |
A1230-007 |
Brushes |
Brush |
||
6 | ENGLISH |
|
|
A1230-005 |
A1230-006 |
||
|
|
|
|
Product Information
•The 16.5" Extension Wands (1) connect to the Steam Nozzle. Used with mop attachment or for high or hard-to-reach places.
•The Microfiber Mop Pad (2) attach to the Mop Head, and are designed for removing scuffs and stains from hard floors. The Pads are reusable and machine washable.
•The Scrubbing Mop Pad (3) attach to the Mop Head, and are designed for removing scuffs and stains from hard floors. The Pads are reusable and machine washable.
•The 5.5" Jet Nozzle (4) focuses the flow of steam from the Steam Nozzle, and serves as the base to which the Utility Brushes and Angled Nozzle connect.
•The Triangle Brush (5) connects to the Steam Nozzle or Extension Wands, and is designed for cleaning corners and other difficult angles.
•The Large Brush (6) attaches to the Triangle Brush to cover large surfaces.
•The 1.5" Nylon Utility Brush (7) connects to the Jet Nozzle, providing extra scrubbing power for removing exceptionally tough dirt and stains.
•The 1.5" Brass Utility Brush (8) connects to the Jet Nozzle and is designed for removing tough stuck-on grease and grime from durable surfaces such as ovens and grills.
•The Angled Nozzle (9) is designed for reaching difficult angles and areas that the Straight
Nozzle may not completely reach.
•The 3" Scraper (10) attaches to the Steam Nozzle to scrape off stuck on grime.
•The 13" x 8.5" Large Mop Head (11) attaches to Extension Wands to clean garage floors, decks or any other extra large surface areas.
•The Bristle Brush Attachment (12) attaches to Large Mop Head to scrub away stubborn spots on floors.
•The Storage Bag (13) stores all attachments neatly on one convenient bag.
•The Fill Cup (14) is used to fill Boiler without spills.
•The Accessory Net (15) stores brushes and other small accessories.
•The 2.5" Round Brush (16) connects to the Jet Nozzle to scrub especially tough stains. The
Round Brush functions similar to the Nylon Utility Brush, only designed to more efficiently scrub larger surface areas.
•The 2.5" Round Scrub Pad (17) connects to the Jet Nozzle and is designed to scrub tough dirt and scuffs from surfaces.
ENGLISH | 7