McCall DR-1, DR-2, DR-3, DR-4, DR-5 Specifications

McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363

Phone [phone] / Fax [phone] / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com

January 2007 / Printed in U.S.A.

SPECIFICATIONS

Construction - The DR series drop in

refrigerated pans are self-contained units with all
metal, welded construction. All joints and seams
are closed and sealed. Each unit is designed to be
installed in new or existing countertops and will
accommodate 1-6 full size pans. Pans spacer bars,
condenser coil grill, sealing gasket and drain
connection are provided. Cold wall well will accept
up to 6" deep pans. Pans are not provided.

The cold wall wells are fully insulated with special,
extra rigid one-shot, high pressure, foamed in­place, closed cell polyurethane, average thickness

1.5". Top and rails are 18-gauge stainless steel
construction for strength and durability. Louver
cutout is12" x 23.5".

Each unit is provided with large 1" drain offset
from the center of the unit and an ON/OFF switch
and cordset for easy installation.

Self-Contained Refrigeration - The unit is
thermostatically controlled and designed to hold
pre-chilled products at serving temperature. R­134a refrigeration system is self-contained and
center mounted in the unit. It is provided with a
hermetically sealed compressor, capillary-metering
device and adjustable thermostat. The condensing
unit is air cooled with high efficiency fin coil for
extra long life.

Approval :

DR-6

D

ROP

-INR

EFRIGERATION

McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com

AIA #

ITEM #
MODEL #
PROJECT NAME

SIS #

Models:
DR-1 1 fullsize pan capacity

DR-2 2 fullsize pan capacity
DR-3 3 fullsize pan capacity
DR-4 4 fullsize pan capacity
DR-5 5 fullsize pan capacity
DR-6 6 fullsize pan capacity

Standard Features

• All metal welded construction

• Cord set and on/off switch

• Cold wall technology

• R-134a refrigerant

• Hand wrapped cooling coils

• 100% bonding of cooling coil to tank

• Ventillation grill with large louver openings

CLASSIFIED TO

NSF (STD-7-1999)

McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363

Phone [phone] / Fax [phone] / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com

January 2007 / Printed in U.S.A.

OFFSET BOTTOM

(OPTIONAL)

21.80

11

DROP-IN REFRIGERATION

Model DR-1
Model DR-2
Model DR-3
Model DR-4
Model DR-5
Model DR-6

Bidding Specifications

McCall Drop In Refrigeration shall have:

All metal, welded construction. Closed and sealed joints. Top and rails are 18­gauge stainless steel construction. R-134a refrigeration system is self­contained and mounted to underside of unit. Cold wall wells fully insulated
with high pressure, foamed-in-place closed-cell polyurethane with average
thickness of 1.5". Unit is provided with 1" drain offset from the center of unit.
ON/OFF switch and cord set. Louver cutout is 12" x 23.5".

OPTIONS

 Removable bottom strainer plate
 Drain pipe ball valve

Description

AIA #

16070

D

E

13.88

B

C

MODEL

# of

SECTIONS

DR-1
DR-2
DR-3

DR-4
DR-5
DR-6

1
2
3

4
5
6

A

18

30.75

43.50

56.25
69

81.75

B

16.75

29.50

42.25

55

67.75

80.50

C

13.50

26.25
39

51.65

64.50

77.25

D

3.79

4.93

11.31

17.69

24.06

30.43

E

1.43

7.81

14.18

20.56

26.93

33.31

CUTOUT DIM.

17 x 25

29.75 x 25

42.50 x 25

55.25 x 25
68 x 25

80.75 x 25

*First 2 digits omitted.

Specifications are subject to change without prior notification.

**Ambient of 75˚F and evaporator temperature of 10˚F.

Base Model Number* 1 2 3 4 5 6
Compressor HP 1/6 1/6 1/5 1/5 1/4 1/3

Voltage (60 hz, 1 ph) 115 115 115 115 115 115
Total Amperage: 4.0 4.0 4.0 4.0 5.0 7.0
BTU/HR** 910 910 1070 1070 1700 2070
Cord connection - ANSI 5-15P

ELECTRICAL

SIDE VIEW

FRONT VIEW

ELECTRICAL CONNECTION AND

SWITCH

GRILL

(SHIPPED LOOSE)

18

12.37
TYP

24.75

26

19.81

9.370

A

TOP VIEW