McCall 1-1020GD, 2-2020GD, 4-4020GD Specifications
McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
January 2007 / Printed in U.S.A.
Cabinet - Cabinets are all metal, inside and out.
The top, back, and bottom are made of galvanized
steel. In addition, all seams are closed and sealed,
with metal edges turned away from the exposed
surface. The result is an integrated structural
frame. Internal corners are coved to conform to
NSF standards. Automatic interior lighting is
controlled by a light switch mounted inside.
Doors - Hinged glass doors with horizontal 40
watt fluorescent lighting. (1 section only, 2 & 3
sections vertical.)
Insulation - Cabinet body, doors, and evaporator
coil housings are filled with pressure-injected
polyurethane foam.
Interior Shelves - Three wire shelves per section
are standard. Shelves have a runner spaced 3/4
inch O.C. with two reinforcing bars 8 1/2 inch O.C.
Coated with 7 mils of baked-on gray epoxy. The
shelves have a saline spray corrosion resistance of
600 hours. Shelves will support 250 pounds each
with maximum cabinet load of 800 lbs. They are
supported on stainless steel pilasters (1000 series)
& aluminum pilasters (2000-4000 series), and are
adjustable on 1 inch centers. All three shelves are
interchangeable and can be adjusted without tools
or special parts.
Self-Contained Refrigeration - The complete
refrigeration assembly is mounted on top of the
cabinet behind a removable hatch cover.
Refrigeration components include a hermetically
sealed compressor, thermostatic expansion valve,
thermostatic temperature control, high-humidity
evaporator coil and hot gas condensate evaporator.
The system is balanced to maintain 38°F average
internal air temperature. Windrunner gradient air
displacement process provides even air flow and
temperature control throughout the cabinet. All
components are factory installed and tested, and
supplied with an attached cord and plug
(self-contained, 115 volt only less than 16 amps),
master power switch, and exterior digital
thermometer (1000 series) dial thermometer
(2000-4000 series).
Remote Cabinets - Standard remote units are
provided with capped refrigeration lines, expansion
valve, solenoid valve, electric condensate
evaporator, and temperature control. Condensing
unit is not included. All other features are the
same as self-contained units, except power cord.
Approval :
AIA #
ITEM #
MODEL #
PROJECT NAME
SIS #
SPECIFICATIONS
Model 1-1020GD
Stainless steel cabinet interior and exterior front, sides with two pane
glass doors.
Model 2-2020GD
Stainless steel cabinet exterior front, sides and floor
with two pane glass doors. Heavy gauge aluminum
cabinet interior.
Model 4-4020GD
Heavy gauge anodized aluminum cabinet exterior sides.
Stainless steel cabinet front except for aluminum ends that wrap
around front. 2 pane glass doors.
Heavy gauge aluminum cabinet interior with stainless steel floors.
Standard Features
• Top mounted compressor and evaporator coil
• Expansion valve
• Hot gas condensate evaporator
• Windrunner gradient air displacement process
• R-134a refrigerant
• Exterior digital thermometer (1000 series) dial thermometer
(2000-4000 series)
• Self-closing spring loaded hinges
• 6 inch adjustable legs
• Baked epoxy-coated shelves adjustable on 1 inch centers
G
LASSDOORREACH
-I
N
R
EFRIGERATORS
( 1
SECTION
)
1-1020GD
CLASSIFIED TO
NSF (STD-7-1999)
McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com
McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
January 2007 / Printed in U.S.A.
Notes: (R) Remote cabinets are equipped for 15 amp
permanent connection. *First 3 digits omitted.
**Based on 90°F ambient and 20°F evaporating temperature.
Specifications subject to change without notice.
Certain options and accessories may affect UL/NSF approval
and electrical requirements.
27.5
POWER
CONNECTION
31.81
57.81
OPTIONS
01 Half height doors.
C Heavy-duty 6 inch casters
(on cord connected models only).
A Audio visual alarm.
P Pass-Thru.
R Remote.
DescriptionModel Suffix DescriptionModel Suffix
E Electric condensate
evaporator.
Finished back.
Tray slides
Stainless steel shelves.
extra epoxy
coated shelves.
Left or right door hinge.
Digital Thermometer
One
Section
Net Capacity: 22.4 cu.ft.
Width: 27.5"
Height: with legs or casters 84.5"
Depth: cabinet only -
including controls 31.18"
Depth: over hardware -
reach-in 34.81"
Depth: over hardware -
pass-thru 38.44"
Depth: door open 90° -
reach-in 57.81"
Depth: door open 90° -
pass-thru 84.44"
Net Door Opening:
width 21.25"
Net Door Opening:
height -full doors 58"
Net Door Opening:
height - half doors 27"
Adjustable Shelves 3
Shipping Weight:
DIMENSIONS
Model 1-1020GD
4-4020GD
2-2020GD
420 lbs.
375 lbs.
330 lbs.
One Section
Base Model Number* 20GD 20PGD
Compressor HP 1/2 1/2
Voltage (60 hz, 1 ph) 115 115
Total Amperage: 11 13.6
BTU/HR** 3012 4140
Cord connection - ANSI 15 5-20P
ELECTRICAL
Bidding Specifications
McCall Glass Door Reach-In Refrigerator Cabinets shall have:
Top mounted compressor. Automatic defrost. Expansion Valve. Hot gas condensate evaporator.
Matched and balanced system. Exclusive Windrunner Gradient Air Displacement Process.
Stainless steel front, doors and floor. Self-closing hinged glass doors, with fluorescent lights.
Adjustable doorstops. Exterior digital thermometer (1000 series) dial thermometer (2000-4000
series). Stainless steel pilasters (1000 series) & aluminum pilasters (2000-4000 series) adjustable
on 1" centers. Three epoxy coated shelves per section. 6" adjustable legs. Master Power Switch.
R-134a refrigerant. 22.4 cubic ft. capacity. Dimensions: Width=27.5"/Height=84.5"
Model 1-1020GD
Model 2-2020GD
Model 4-4020GD
GLASS DOOR REACH-IN
REFRIGERATORS ( 1 SECTION )
84.44
31.18
POWER
CONNECTION
27.5
33.5
34.81
13.56
64.93
84.5
TOP VIEW
SIDE VIEW
TOP VIEW
(PASS-THRU)
Pass Thru
AIA #
6
16016
Loading...