MBQuart NK1-116, NK1-120, NK1-169, NK1-116L, NK1-120L Installation Manual

...

Page 1

If you are replacing an older or inferior speaker, the location is chosen for you. Make sure the speaker ﬁ ts properly in the hole for the old speaker. If you are creating your own new location, you must be careful to verify that there is sufﬁ cient depth to mount the speaker.

Choose a suitable mounting location

Speaker Mounting Location

Speaker Dimensions

CAUTION

Always consider consulting a professional audio installer before installing new speakers. Many manufacturers locate speakers behind interior panels that require special tools to

remove. Be careful and take your time. If you are using the speaker wire supplied with your new speakers make sure that you run the speaker wires only

through safe areas. Do not let speaker wire make contact with

metal edges or hot engine components.

Congratulations on your choice of a MBQuart speaker.

This “Quick Start” Installation guide is meant to help you complete a basic installation. For more detailed

information on system setting, speaker and subwoofer conﬁ guration, and full speciﬁ cations by model, visit our

website at mbquart.com

It’s a good idea to conﬁ rm that you have purchased the correct size speakers to ﬁ t your application. If you have any reservations about being able to complete the installation yourself, we recommend contacting a professional.

ABCDE

NK1-116 / NK1-116L

6.58”(174) 3.02”(77) 1.14”(29) 3.58”(91) 5.59”(142)

NK1-120 / NK1-120L

8.46”(215) 3.58”(91) 1.26”(32) 5.20”(132) 7.09”(180)

NK1-169 / NK1-169L

9.69”/6.86” (246/174)

3.50”(89) 1.20”(30) 3.87”(99) 8.58”/5.74” (218/147)

Before you start

Once you are sure the speaker ﬁ ts and has adequate clearance, connect the positive and negative wires to the proper terminals. Securely screw the speaker into place.

Carefully select a route for the speaker wires. If using existing speaker wires, conﬁ rm that the wire is in good shape and not shorted. In the case of an illuminated model, route a positive and negative wire from a switched +12V source.

Conﬁ rm ﬁ t and mount speaker

Route signal and illumination wires

Speaker installation

Wiring

D E

Illumination

Negative

Illumination

Positive

Audio Signal

Negative

Audio Signal

Positive

Page 2

Quick Start

Installation Guide

WARRANTY

Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty period. Components that prove to be defective in materials and workmanship under proper installation and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was purchased. A photocopy of the original receipt must accompany the product being returned. The costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics USA Inc. This warranty is limited to defective parts and speciﬁ cally excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website.

Hifonics products are designed and engineered in the USA by

847-540-7700

www.maxxsonics.com

NK1-116

NK1-120

NK1-169

NK1-116L

NK1-120L

NK1-169L

NAUTIC

MBQ NK skr QSG 01 - rev1

Illumination control

If you have purchased an illuminated version, consider getting an N1-RC remote control. The remote allows you to adjust color, speed and brightness of the illumination. Check with an authorized MBQuart retailer or check our website www.mbquart.com for further details.