www.mbquart.com
FORMULA
FKB113 / FKB116 / FKB157
FTB169 / FSB213 / FSB216
Thank you for choosing MB Quart Formula speakers for your car audio
sound system. With proper installation, you are on the path to
experiencing your music in a way you only imagined possible. Here at
MB Quart, we call this “Sound In Every Detail.”
The Formula series speakers have been designed for the enthusiast
looking for great sound at an affordable price. The Formula series
speakers feature the following:
- Progressive Grill
- High Energy Magnet
- Polypropylene Cone
- Woven Tinsel Leads
- Spade Style Speaker Terminals
- 19mm Titanium Dome Tweeter
- Small Chassis Crossover For Components
- Stamped Steel Basket
FORMULA
FKB113 / FKB116 / FKB157
FTB169 / FSB213 / FSB216
As with all high quality car audio products, we recommend professional
installation by an authorized MB Quart dealer. Your dealers knowledge
and experience can ensure a problem free and cosmetically integrated
installation.
If you choose to install the speakers yourself, please read the entire
manual very carefully.
SPEAKER LOCATION AND MOUNTING TIPS
THE FIRST STEP IS THOROUGH PLANNING BEFORE THE
INSTALLATION BEGINS. THE SPEAKER SCREW HOLE
CONFIGURATION WILL WORK WITH MOST DOMESTIC AND
FOREIGN VEHICLES. FOLLOW THESE INSTRUCTIONS
CAREFULLY TO ENSURE PROPER IMAGING AND MAXXIMUM
PERFORMANCE.
Factory Speaker Replacement Location and Installation
1. Before you alter the vehicles interior materials, be sure there is
adequate room and clearance for the speaker depth to clear the
windows and other moving parts. (See speaker measurement page).
2. If you are using the speaker wires provided in this kit, be sure to
route wires through the factory door grommet as shown in the speaker
mounting diagram.
3. After securing the speaker and checking clearances, connect the
red/black speaker audio wires to the correct speaker + and - spade
terminals.
Custom Speaker Location and Installation
1. Follow steps 1-3 above.
2. Use the speaker mounting diagrams and speaker hole cut-out
dimensions on the following pages.
3. Always mount the left and right side speakers on the same plane.
This means that each speaker should be the same height from the
floor and same distance from the firewall. Do not mount one speaker
higher, lower, further forward or further behind the other.
FORMULA
FKB113 / FKB116
FKB157 / FTB169
COAX MOUNTING & WIRING PROCEDURES
Rear Deck Mount
Speaker Grill
Mounting Screws
Spacer Ring
Speaker
Door Mount
Wire Routing
Inner Metal Door Panel
Wire Connections
-
Amplifier
+
Inner Metal Door Panel
Interior Door Panel
Speaker
Speaker Grill
Black
Red
+
Speaker Screws
Factory Grommet
Speaker Wires
FORMULA
FSB213
FSB216
Door Mount
COMPONENT MOUNTING PROCEDURES
Inner Metal Door Panel
Wire Routing
Inner Metal Door Panel
Tweeter Retaining Clip
Interior Door Panel
Tweeter
Speaker
Speaker Grill
Speaker Screws
Factory Grommet
Speaker Wires
Wire Connections
To amplifier
+ & - output
+
RED
BLACK
MID BASS
INPUT
Passive In-Line Crossover
OUTPUT
FORMULA
+
TWEETER