Page 1
User Manual
ES8000
REV.01
Page 2
User Manual ES8000
1
Contents
Introduction
Installation
Operation
Introduction
Specifications 3
Identifying
Parts 4
Installation
2
7
OP Panel 8
Paper Loading 9
Fold Type Setting 11
Understanding Folding
Mechanism 12
Functions
20
Error
Code 22
Trouble Shooting
Paper Jam 23
Others 24
Maintenance
Replacing In-Feed
Roller 25
Roller Cleaning 26
Page 3
User Manual ES8000
2
Introduction
Welcome!
Introduction
Thank you very much for selecting a Paitec USA product!
This manual is prepared to provide you with guidelines on how to properly operate and
maintain the ES8000. Please read this user manual before operating in order to
prevent unexpected malfunction or damage. Please refer to the manual carefully and
follow the instruction.
Copyright 2014
Any of the contents should not be copied, re-printed or translated by other languages
without Paitec USA approval.
Safety Precautions
Caution: Serious bodily injury or mechanical damage may result from
insufficient attention to or incorrect compliance with warning
● Do not attempt to disassemble or reorganize the machine. It may cause an electric
messages using this symbol.
shock or mechanical problem.
● Quickly disconnect the power if liquid or a foreign object enter the inside of the
machine.
● Do not enter metal or inflammable material into AC Inlet.
● Please contact local dealer when you relocate the machine.
● This manual is subject to be revised without notice for product improvement.
● Do not install the machine on the place as below.
- Near window or places exposed to direct sunlight.
- Where vibration is detected.
- Sudden temperature changes or poorly ventilated areas.
- Places exposed to hot or cold air directly. (not office circumstance)
- Not solid enough or weak floor.
Page 4
User Manual ES8000
3
Specifications
Introduction
Features
● ES8000 is a midrange level of pressure sealer. Speed processing up to 8,000
sheets per hour, perfect sealing quality with 2 ½” of pressure rollers, duty cycle
up to 150,000 sheets per month.
● Friction Reverse Rollers (FRR) Technology for papers separation. High Capacity
Top Feed Elevator Infeed Table. Snap-on Easy Feed Roller Replacement. Double
Feed Sensor Alert System.
Specifications
A4 / Legal / Letter
Form Size
Specifications
Paper Weight
uty
er
Speed
Fold Setting
Fold Type
Double Feeding Detect
S
tack
D
Max 8,000 sheets per hour
Optional: Vertical Stacker, Slide Conveyor
Available by DFD sensor
20#-28#
M
Z, C, V, EZ
150,000 /
anual
month
Page 5
User Manual ES8000
4
Identifying Parts
Main Body
Introduction
①
③
① Feeding Unit Safety Cover
④
②
⑤
② Upper Fold Cassette Safety Cover
③ Lower Fold Cassette Door
④ OP Panel
⑤ Conveyor (optional)
Page 6
User Manual ES8000
5
Identifying Parts
Introduction
Large Capacity Table
②
①
Lower Cassette
①
②
Upper Cassette
⑤
④
③
③
① Papers Support Hanger
④
② Feed Guide (Left)
③ Feed Guide (Right)
④ Locking Knob
⑤ In-feed Roller
① Lower Cassette
② Stopper
③ Stopper Adjustment Knob
④ Stopper Locking Knob
③
③
①
① Stopper Adjustment Knob
② Stopper Locking Knob
③ Fold Position Marker
Page 7
User Manual ES8000
6
Identifying Parts
Out-Feed Unit
Introduction
①
④
②
③
⑤
① Power Switch
② Main Power Socket
③ Conveyor Power Socket
④ Press Roller Cover
⑤ Emergency Switch
Page 8
User Manual ES8000
7
Installation
Installation Environment
1. Input power : 100~110V
2. Machine size(inches) : 24" x 18" x 16" (without conveyor)
3. Machine weight : 99Lbs
- Weight of a product is heavy, please use appropriate table for putting it on.
- Please use grounded power cable.
Unpacking
Installation
Please check if all of the following parts are included in the box.
- Main body, Power Cord, User’s Manual, V-Fold Guide and Jam Removal handle.
Removing Safety Tape and Styrofoam Location
Please remove all safety tapes and Styrofoam before operation.
Power Connection
Please refer to the label for electric information which is located at the back side
of the machine. When the power cable is properly connected, please switch the
machine on and check whether ‘Ready’ sign is appear on the display panel.
If not, please contact your local dealer for service.
Page 9
User Manual ES8000
8
OP Panel
Operation
1. Start/Stop button: starts and stops the machine. If you press during setting, it returns to
the prior condition.
2. Set/Store button: sets and stores the selected function.
3. Mode button: enters to mode function.
4. Count button: enables you to set the number of forms that you wish to process and
have the machine stop automatically until you press the start button.
- Press the counter button and the light will blink.
- Change the displayed value by using select button and when ready, press the set button.
- When changing the value, press batch counter button to increase the value by 50 up to 500.
- This setting is not stored after rebooting the machine.
5. Select button: selects yes/no or increase/decrease numerical value when you set.
6. Count reset button: clears the count on the display panel.
7. Thickness Sensor button: protects the double or multiple feeding by sensing the
8. Jam free button: automatic removal of paper jam at folding roller or press roller.
9. Auto start button: re-starts the process after selected time when the job reaches
preset count.
characteristics of paper.
Page 10
User Manual ES8000
9
Paper Loading
Operation
ES8000 can handles any form that is larger or smaller than the following forms.
Paper Feeding
1. Before loading the forms onto the machine, please make sure all forms are
aligned and fanned. Please refer to the images below.
Paper Size
If the condition of forms are not good as the picture above (Bad), place
appropriate quantity of forms, unless forms will be jammed.
Good
Bad
Page 11
User Manual ES8000
10
Paper Loading
2. Open the safety cover of the feeding unit. The tray will go down.
3. When the feed tray is down to the bottom, loosen the green knobs on both
paper guides.
4. Load the aligned forms onto the feed tray and adjust the paper guides so they
are gently covering the sides of the stacked forms.
Operation
5 Tighten back the green knobs on both paper guides.
6. Once loading is complete, please close the safety cover. The feed tray will
go up.
Caution
- Poor quality forms may cause frequent paper jams.
- Make sure the paper guides are not set narrower or wider than the
width of the paper.
Page 12
User Manual ES8000
11
Fold Type Setting
Setting of Paper and Folding Type
Operation
The following instruction shows how to set 8 ½ x 11” Letter size Z-Fold.
(Note: Please be noted that the position marker doesn’t guarantee 100% positioning)
1. Lower Cassette Fold Setting - 93mm
1) Unlock the fold position of the lower cassette by turning the stopper locking
knob counter clockwise.
2) Adjust the stopper so the surface of the rubber is lined up at 93mm.
3) Lock the stopper by holding the stopper adjustment knob and turning the
stopper locking knob
2. Upper Cassette Fold Setting - 93mm
clock
wise.
1) Unlock the fold position of the upper cassette by turning the stopper locking
knob counter clockwise.
2) Adjust the stopper so the red marker is lined up at 93mm..
3) Lock the stopper by holding the stopper adjustment knob and turning the
stopper locking knob
clock
wise.
Page 13
User Manual ES8000
12
Understanding Folding Mechanism
It is important to understand how ES8000 folds paper in order to accurately set
the fold setting. Please read the following information carefully to fully
understand the folding mechanism of ES8000.
Operation
1. The folding unit is composed of rollers, cassettes and stoppers.
Fold Rollers
Lower Cassette
2. The form enters in between the two front fold rollers.
Upper Cassette
Upper Cassette Stopper
Lower Cassette Stopper
3. The form hits the upper cassette stopper and buckles in the middle. Then the
folded portion enters in between the middle two rollers.
Page 14
User Manual ES8000
13
Operation
Understanding Folding Mechanism
4. The form hits the lower cassette stopper and forms a buckle. The folded form then
enters in between the two outer rollers.
5. The folded form then exits the fold rollers and then are sent to the press unit.
Page 15
User Manual ES8000
14
Understanding Folding Mechanism
Z-Fold Setting
Paper
In-feed
Direction
Lower Cassette Stopper
Upper Cassette
Operation
③
Second Fold
(Lower Cassette)
When setting a Z-Fold, please read the following steps.
1. Measure the length from line 1 to line 2 of the form as indicated in the image above.
That measurement is the fold setting for the first (upper cassette) fold.
2. Measure the length from line 2 to line 3 of the form as indicated in the image above.
That measurement is the fold setting for the second (lower cassette) fold.
② ①
First Fold
(Upper Cassette)
In-feed Direction
Page 16
User Manual ES8000
15
Understanding Folding Mechanism
V-Fold Setting
Operation
V-fold Guide
② ①
First Fold
(Upper Cassette)
In-feed Direction
When setting a V-Fold, please read the following steps.
1. Measure the length from line 1 to line 2 of the form as indicated in the image above.
That measurement is the fold setting for the first (upper cassette) fold.
2. Make sure the V-fold guide is placed at the entrance of the lower cassette.
Page 17
User Manual ES8000
16
Understanding Folding Mechanism
C-Fold Setting
Operation
③ ② ①
Second Fold
(Lower Cassette)
First Fold
(Upper Cassette)
When setting a C-Fold, please read the following steps.
1. Measure the length from line 1 to line 3 of the form as indicated in the image above.
That measurement is the fold setting for the first (upper cassette) fold.
2. Measure the length from line 3 to line 2 of the form as indicated in the image above.
That measurement is the fold setting for the second (lower cassette) fold.
In-feed Direction
Page 18
User Manual ES8000
17
Understanding Folding Mechanism
Double-Fold Setting
Operation
③ ② ①
Second Fold
(Lower Cassette)
First Fold
(Upper Cassette)
When setting a Double-Fold, please read the following steps.
1. Measure the length from line 1 to line 3 of the form as indicated in the image above.
That measurement is the fold setting for the first (upper cassette) fold.
2. Measure the length from line 3 to line 2 of the form as indicated in the image above.
That measurement is the fold setting for the second (lower cassette) fold.
In-feed Direction
Page 19
User Manual ES8000
18
Understanding Folding Mechanism
Window-Fold Setting
Operation
④ ③ ② ①
Second Fold
(Lower Cassette)
First Fold
When setting a Window-Fold, please read the following steps.
1. Measure the length from line 1 to line 4 of the form as indicated in the image above.
That measurement is the fold setting for the first (upper cassette) fold.
2. Measure the length from line 4 to line 2 of the form as indicated in the image above.
That measurement is the fold setting for the second (lower cassette) fold.
(Upper Cassette)
In-feed Direction
Page 20
User Manual ES8000
19
Understanding Folding Mechanism
Fine Adjustment of Folding Position
You can adjust the fold setting in the following cases.
1. Fine adjustment is required from the standard folding type.
2. In case the folding is slightly different.
Reference
Operation
If the folding is slightly off from the desired position, please check the
following possible causes.
a. Incorrect fold setting
b. Machine clearance
c. Incorrect position of fold cassettes
d. The FRR or the fold rollers are worn out
Page 21
User Manual ES8000
20
Functions
Operation
Count Setting
You can set the number of jobs to be done.
For example, if you set count on 100, machine will stop operating when the job
reaches 100. Press Start/Stop button again, machine will start to finish another 100.
1. Press Count button and the LED will light on
2. Select job volume by using - / + button.
* If you press the button on by one, count will change by 1 and if you press
for more than one second, the count will change by 10/second.
3. Press Set button and check the number displayed on the panel.
* You can set the counter up to 250 sheets.
Use of “Auto Start” Function
In case you need job separation, you do not have to press Start button again.
1. Press the button. Then ‘Time Interval’ will be displayed on the panel. Select
the desired
delay time by second with - / + button.
2. Press Set/Store button.
3. Max. 10 seconds of delay time can be set.
Reference
For example, in case count set to 10 and Auto Start time interval set to 3 seconds,
after 10 products, machine will stop for 3 seconds. LED will blink. 3 seconds later,
it will work again.
If you switched off the power and on, you have to set the function again.
Page 22
User Manual ES8000
21
Functions
Thickness Sensor
This function prevents double or mass feeding.
1. Press the Thickness Sensor button.
2. It will feed on paper and stop at the digital sensor for a second.
3. The thickness of the paper will be shown on the panel in digital value and
paper comes out. Check if LED is on.
4. Press Start/Stop button and it works. If double or multiple papers feed at the
same time, machine will stop before the paper goes into folding roller and
Error #5 will be displayed on the panel.
Operation
Reference
Whenever you change the paper, you are requested to off and on the Thickness
Sensor button since the value is different depending on papers.
Reference
This digital value won’t change by turning on/off the power.
Use of “Jam Free” Function
In case the paper is jammed at folding roller or press roller, machine will stop with
error message. Then, press Jam Free button and machine will run except feeding
unit. If it is still not possible to remove the jam, Please refer to P.23 Paper Jam
Page 23
User Manual ES8000
22
Error Code
Error Message
There are various types of sensors located at different parts of ES8000. These sensors
detect and display the location of an error on the panel. Please read the following errors
to understand how to handle each error.
Trouble Shooting
Error
Message
Lower Cassette
Missing
Push the cover of Lower Folding cassette until it is installed.
Close Left
Close Right
Out of
Paper
Cover
Cover
Safety Cover of feeding unit is open. Close the cover.
Safety cover of Upper folding cassette is open. Close the cover.
There is no paper on paper tray. Supply paper.
Not
Available
Error #5
The selected folding is not available. Choose other folding type.
Double feeding happened. Open the safety cover of feeding unit
and remove the paper jam under pickup roller.
Error #6
Error #7
Error #8
Error #9
Error
#A
Error
#B
Error
#C
Error
#0~3
Paper jam on feeding unit. Open the safety cover of feeding unit
and remove the paper jam.
Paper jam inside the main body . Take out the Upper / Lower
folding cassette and remove the paper.
Memory storing error. Try again.
Paper jam in the folding cassette. Take out the upper / Lower
cassette and remove the paper.
Paper jam in press roller. Press “Jam Free” button on control panel.
If it doesn’t work, remove jam according to picture on Delivery unit.
Paper jam in front of press roller. Take out the Upper / Lower
Folding cassette and remove the paper.
Paper jam in front of folding roller. Take out the Upper / Lower
folding cassette and remove the paper.
Call the service.
Page 24
User Manual ES8000
23
Trouble Shooting
Paper Jam
Removing the jammed paper at the upper cassette
1. Open the top upper cassette safety cover.
2. Pull out the upper cassette and remove any jammed paper.
Caution
Please be cautious when removing jammed forms as it may result in damaging
Removing the jammed paper at the lower cassette
1. Open the lower cassette cover.
2. Remove any jammed paper
the upper cassette.
Double Feed
1. Try to remove the jam by using the jam free button.
2. If the jam is not cleared by using the jam free button, please use the jam removal
handle to manually remove the jam.
When removing the jam, turn the press
rollers by inserting the jam removal
ratchet and turn it clockwise like the
picture.
Caution
1. Turn off the power
2. Never operate the machine with
the jam removal handle set up
Important
The press rollers are designed to accept 20~28# forms. Any forms
that are heavier may affect the machine to malfunction.
Page 25
User Manual ES8000
24
Trouble Shooting
Others
Some of the errors can easily be fixed by the user without a professional’s aid.
No Power
1. Check whether the power cable is properly connected.
2. Check the (red) Emergency Switch.
3. Check the electric source.
Incorrect Folding
1. Please re-set the paper length and folding type.
2. Check if the initial folding position (home position) is same as ex works
setting.
Power On, but No Start
1. Check if the left safety cover is opened.
2. Check if the right safety cover is opened.
3. Check if the lower cassette is pushed all the way in.
4. Check for any paper jams.
Frequent Double or Multiple Sheet Feeding
1. Change the Infeed Roller Set. Rollers are probably worn-out.
2. Check if the adhesive of the paper is too strong or static. Please align the
paper again and feed.
3. If the paper weight is too light (below 20#), contact the service engineer.
4. Some part of paper is bent.
5. After you have changed the paper, you are requested to press Thickness
button again (off and on) since the thickness of each paper should be
different.
6. Paper side guide is not set correctly. Please check if it is too tight or too
loose.
Page 26
User Manual ES8000
25
Maintenance
Replacing InFeed Roller Set
Exchanging Friction Reverse Roller
The feeding rollers consist of three different rollers.
1. Pickup Roller
2. Feed Roller
3. Separate Roller
It depends on the paper weight, type and etc., but please check the parts and
change when you produce over 100,000 products, if necessary. How to change
the parts are as follows.
Pickup Roller
1. Remove the snap ring (white clip).
2. Replace the roller and place back the snap ring.
3. Follow step 1 & 2 for the rest of the rollers.
Feed Roller
Separate Roller
(Below Feed Roller)
Page 27
User Manual ES8000
26
Roller Cleaning
Cleaning Rollers
Since pressure seal forms leave paper dust, ink and toner residues, it is very
important to occasionally clean the surface of the each roller to maintain its
best condition for better performance.
1. Paper dust
- Use small air cleaner or dust remover.
2. Cleaning fold rollers
- Open the safety cover and slide out the upper cassette. With a piece of soft
cloth, use alcohol or water to remove any ink contamination or toner
residues on the surface of the fold rollers.
Maintenance
Caution
Please do not use any other substance when cleaning the surface of the fold
rollers as it may damage the rubber.
Page 28
User Manual ES8000
27
Maintenance
Roller Cleaning
3. Cleaning press rollers
- We suggest you hire a professional service technician for this task.
If you are going to do it by yourself, please turn off the power or unplug the
power cable.
- Clearing lower press roller: Open the safety cover of press roller as picture A. Then,
please clean the press roller shown in picture B.
- Clearing upper press roller: Open the upper folding cassette as picture C and clean
the press roller.
Picture A
Picture C
Picture B
Page 29
28
Service
notes
Memo
Page 30
29
Service
notes
Memo
Page 31
30
Service
notes
Memo
Page 32
h
ttp
://
www.paitec
.com
Loading...