Mazda MPV-Miata User Manual

Platform # 05 Firmware: PKM2

Manual (1\1 Page)

Description: Mazda Transponder Interface: MPV/Miata (PKM2) NO KEY REQUIRED Functions: Data Transponder Interface: Override OEM Transponder Immobilizer Via Data

Downloadable Firmware for Platform #05: PKG3,PKG8,PKH1, PKH2,PKH3,PKH4,PKHY1,PKM2,PKN2,PKT2

WARNING: Before beginning your install go to www.XpressDownload.com and be sure to print the LATEST corresponding installation manual

for the firmware that is flashed to the platform you are using.

Installation

Section A

UPGRADEABLE OVERRIDE OEM TRANSPONDER

IMMOBILIZER

VIA DATA

LED

See Wire Connection Guide for detailed information regarding wire functionality

Option A Firmware Upgrades

D2D

INPUT

10 PIN HARNESS

N/C

OUTPUT

DATA DATA

INPUT

OUTPUT

INPUT

Programming

Blue

button

4 PIN DATA TO DATA (D2D) CABLE (OPTIONAL ACCESSORY)

(-)

N/C

(+)

N/CN/C

(+)

(-)

Brown

Green

Blue

Violet/White

Violet

Pink/White

Pink

Orange

Red

Black

Ground When Running

N/C

Ignition ECM Side

Data (Key Side)

Data (ECM Side)

Ignition (Key Side)

Ignition (ECM Side)

N/C

(+)12 Volt Constant

Chassis Ground

Brown

OptionB-Data2DataConnection to RCS Data Port

ECM Side

USB Adaptor

Black/White Blue/Black

Black or Black/Orange

USB Cable

B B

P.C.

Internet

CLEARCODE VIP

DATAPORT

D2D

Key Side

Data

MAZDA

IMMOBILIZER

MODULE

Ignition

Ground

Immobilizer module is located under dash on the driver side to the right of the steering column.

RC SEMOTE ONTROL YSTEM

RCS

KEYLESS / STARTER/ ALARM

Section B

WIRE GUIDE: CONNECTIONS

10 PIN HARNESS

WIRE

COLOR

PIN#

Brown

Green

Blue

Violet/

White

Violet

Pink/

White

Pink

Orange

Red

Black

Legend RCS = Remote Control System N/C = No Connection N/A = Not Applicable W2W= analogue wire to wire D2D= data 2 data

DATA to DATA PORT (D2D):

OPTION A: - D2D Port used to connect to USB Bootloader adaptor & computer to download & flash vehicle interface firmware. OPTION B: - D2D Port used to connect to the data port of a remote control system equipped with ClearCode ehicle nterface rotocol. Remote control systems designed with ClearCode VIP can securely communicate via the D2D cable to transmit & receive data commands which initiate specific vehicle function such as doorlocks & immobilizer override and /or request information from the vehicle such as status of entry points (doors)or ambiant température, diesel glow plug etc… ClearCode VIP represents the doorway to vehicle integration...As an enhanced security feature, this upgradeable vehicle interface module automatically detects when the Vehicle Interface Protocol is present and deactivates the analogue override input wire (brown wire) ensuring that this module can only be activated by an authorized user.

D2D = Optional use of 4 Pin Data to Data (D2D) cable will replace the analogue wire (w2w) connection

(-)

I/O

D2D w2w

STATUS

D2D

Input

w2w

N/C N/C N/C N/C N/C N/C

Output

w2w

Data

w2w

Data

w2w

Input

Output

w2w

N/C

Input

D2D w2w

D2D

Input

w2w

/(+)

(-)

(+)

(-)

Connect Location

Ground When Running output of remote starter

RCS

Connect in parallel to Pink wire of 10 PIN Harness

Vehicle

Connect to Blue/Black Vehicle Data wire (Key Side)

*Data wire in the Miata is Red/Black

Connect to Blue/Black Vehicle Data wire (ECM Side)

*Data wire in the Miata is Red/Black

Connect to Black/White Vehicle Ignition wire (Key Side)

Once connected in parallel to Blue wire of 10 PIN harness, connect to Black/White Vehicle Ignition wire (ECM Side)

N/C

N/CN/C

Constant (+) 12 Volt Source

Connect to Black or Black/Orange Vehicle Ground wire

Blue connector

SPECIFIC WIRE CONNECTION LOCATION

Immobilizer Bypass Via Data

Ignition Power Source Supply

Data Commands from Module to Vehicle

Ignition Power Source Return

Ignition Power Source Supply

N/C

Power Source

Ground Source

of D2D Cable plugs into the upgradeable vehicle interface module.

ACTIVATION and/or FUNCTIONALITY

VI P

Section C

VEHICLE PROGRAMMING

1) IGNITION

Once module has been properly connected, press and hold programming button then turn key to position, LED should come on solid.

Start vehicle by key, LED will begin to flash. Module is now programmed.

*To RESET, press and hold button and plug in module. LED comes on. When LED goes off, release button.

This Interfacekit / Data BusInterface part has beentested on the listedvehicles. Other vehicles willbe added to theselect vehicle list uponcompletion of compatibilitytesting. Visit website forlatest vehicle application guide. : Underno circumstances shall the manufactureror the distributorsof the bypasskit / databus interface part(s)be held liablefor anyconsequential damages sustained inconnection with thepart(s) installation. Themanufacturer and it’sdistributors willnot, nor willthey authorize any representative or any otherindividual to assumeobligation or liabilityin relation tothe interface kit/ data businterface part(s) otherthan its replacement.

connection withthis productneither assumes norauthorizes anyrepresentative or otherperson toassume for itany obligationor liability otherthan thereplacement of thisproduct only.

N.B.:Under nocircumstances shall themanufacturer and distributorsof this productare liable forconsequential damages sustainedin

DISCLAIMER