J56J_8S11-EA-03G_Edition1.book Page 1 Tuesday, June 24, 2003 6:29 PM
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 2 Tuesday, June 24, 2003 6:29 PM
J56J_8S11-EA-03G_Edition1.book Page 3 Tuesday, June 24, 2003 6:29 PM
A Word to Mazda Owners
Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete
customer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manual
carefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is
necessary, that’s the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the best
possible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure
and in your full satisfaction with your Mazda product.
Mazda North American Operations
Important Notes About This Manual
Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should
you resell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal
at Mazda, we reserve the right to make changes in specifications at any time without notice and without
obligation.
Air Conditioning and the Environment
Your Mazda’s genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to
damage the earth’s ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda
Dealer.
Please be aware that this manual applies to all models, equipment and options. As a result, you may find
some explanations for equipment not installed on your vehicle.
J56J_8S11-EA-03G_Edition1.book Page 4 Tuesday, June 24, 2003 6:29 PM
How to Use This Manual
We want to help you get the most driving
pleasure from your vehicle. Your owner’s
manual, when read from cover to cover,
can do that in many ways.
Illustrations complement the words of the
manual to best explain how to enjoy your
Mazda. By reading your manual, you can
find out about the features, important
safety information, and driving under
various road conditions.
The above symbol in this manual means
"Do not do this " or "Do not let this
happen".
A good place to start is the Index,
Index:
an alphabetical listing of all information
in your manual.
You’ll find several WARNINGs,
CAUTIONs, and NOTEs in the manual.
WARNING
A WARNING indicates a situation in
which serious injury or death could
result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in
which bodily injury or damage to your
vehicle, or both, could result if the
caution is ignored.
NOTE
A NOTE provides information and
sometimes suggests how to make
better use of your vehicle.
Form No. 8S11-EA-03G
The above symbol, located on some parts
of the vehicle, indicates that this manual
contains information related to the part.
Please refer to the manual for a detailed
explanation.
J56J_8S11-EA-03G_Edition1.book Page 5 Tuesday, June 24, 2003 6:29 PM
Table of Contents
Your Vehicle at a Glance
Interior, exterior views and part identification of your Mazda.
Essential Safety Equipment
Use of safety equipment, including seats, seat belt system, SRS air bags and
child-restraint systems.
Knowing Your Mazda
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Before Driving Your Mazda
Important information about driving your Mazda.
Driving Your Mazda
Explanation of instruments and controls.
Interior Comfort
Use of various features for drive comfort, including climate control and audio
system.
In Case of an Emergency
Helpful information on what to do in an emergency.
Maintenance and Care
How to keep your Mazda in top condition.
Customer Information and Reporting Safety Defects
Important consumer information including warranties and add-on equipment.
1
2
3
4
5
6
7
8
9
Specifications
Technical information about your Mazda.
Index
Form No. 8S11-EA-03G
10
11
J56J_8S11-EA-03G_Edition1.book Page 6 Tuesday, June 24, 2003 6:29 PM
J56J_8S11-EA-03G_Edition1.book Page 1 Tuesday, June 24, 2003 6:29 PM
1
Your Vehicle at a Glance
Interior, exterior views and part identification of your Mazda.
J56J_8S11-EA-03G_Edition1.book Page 2 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Seat Slide
Front Seats (Manually
▼
Operated Seats)
WARNING
WARNING
Securing the Seats:
Adjustable seats and seatbacks that
are not securely locked are
dangerous. In a sudden stop or
collision, the seat or seatback could
move, causing injury. Make sure the
adjustable components of the seat are
locked in place by attempting to slide
the seat forward and backward and
rocking the seatback.
Driver’s Seat Adjustment:
Adjusting the driver’s seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident. Adjust the
driver’s seat only when the vehicle is
stopped.
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
Lever
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
2-2
Form No. 8S11-EA-03G
CAUTION
J56J_8S11-EA-03G_Edition1.book Page 3 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Seat Recline
▼
WARNING
Reclining:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don’t get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back
and upright.
Unlocked Seatback:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After adjusting the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Lever
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
When returning a rear-reclined
seatback to its upright position, make
sure you support the seatback while
operating the seatback lever. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
2-3
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 4 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Height Adjustment (Driver’s
▼
Seat)
By moving the seat lever up or down, the
seat bottom height can be adjusted.
Up
Down
Lever
Head Restraint
▼
WARNING
Head Restraints Adjustment:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Always drive with the head restraints
inserted when seats are being used
and make sure they are properly
adjusted.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stopcatch release, then push the head restraint
down.
Stop-catch release
2-4
Form No. 8S11-EA-03G
Adjust the head restraint so that the top is
parallel with the top of the passenger’s
ears, never the passenger’s neck.
WARNING
J56J_8S11-EA-03G_Edition1.book Page 5 Tuesday, June 24, 2003 6:29 PM
Seat Warmer*
▼
The front seats are electrically heated. The
ignition switch must be in the ON
position.
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
ON
OFF
NOTE
The thermostat regulates seat
temperature by turning the current on
and off.
Front Seats (Electrically
Operated Seats)
Essential Safet y Equipment
Seats
Modification of the Front Seats:
Removing and reinstalling the front
seats for modification purposes is
dangerous. The front seats contain
air bag components or essential to the
supplemental restraint system. Such
modification could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
Damaged Front Seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag components.
If there was a subsequent collision,
the air bag may not deploy and which
could lead to injuries. Always have an
Authorized Mazda Dealer inspect the
front seats after a collision.
Form No. 8S11-EA-03G
*Some models.
2-5
J56J_8S11-EA-03G_Edition1.book Page 6 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Seat Recline (Driver’s Seat)
▼
CAUTION
The seat-bottom power adjustment
•
is operated by motors. Avoid
extended operation because
excessive use can damage the
motors.
To prevent the battery from running
•
down, avoid using the power
adjustment when the engine is
stopped. The adjuster uses a great
amount of electric power.
Don’t use the switch to make more
•
than one adjustment at a time.
Seat Slide (Driver’s Seat)
▼
To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.
Reclining:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don’t get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back
and upright.
Change the seatback angle by pressing the
front or rear side of the reclining switch.
Release the switch at the desired position.
WARNING
Slide lifter switch
2-6
Form No. 8S11-EA-03G
Reclining switch
J56J_8S11-EA-03G_Edition1.book Page 7 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Height Adjustment (Driver’s
▼
Seat)
Front height adjustment
To adjust the front height of the seatbottom, raise or lower the front of the
slide lifter switch on the left side of the
seat.
Switch
Rear height adjustment
Raise or lower the back of the switch to
adjust the rear height of the seat-bottom.
Switch
Height adjustment
Raise the seat-bottom by pulling up on the
center of the switch. Release the switch at
the desired position.
Lower the seat-bottom by pressing down
on the center of the switch. Release the
switch at the desired position.
Switch
Lumber Support Adjustment
▼
(Driver’s Seat)
To adjust the lumbar support, pull the
lever forward.
Lever
Form No. 8S11-EA-03G
2-7
J56J_8S11-EA-03G_Edition1.book Page 8 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Head Restraint
▼
WARNING
Head Restraints Adjustment:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Always drive with the head restraints
inserted when seats are being used
and make sure they are properly
adjusted.
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stopcatch release, then push the head restraint
down.
Stop-catch release
Seat Warmer*
▼
The front seats are electrically heated. The
ignition switch must be in the ON
position.
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
ON
OFF
NOTE
The thermostat regulates seat
temperature by turning the current on
and off.
Adjust the head restraint so that the top is
parallel with the top of the passenger’s
ears, never the passenger’s neck.
2-8
*Some models.
Form No. 8S11-EA-03G
WARNING
J56J_8S11-EA-03G_Edition1.book Page 9 Tuesday, June 24, 2003 6:29 PM
Rear Seat
Essential Safet y Equipment
Seats
WARNING
Stacking Cargo:
Stacking luggage or other cargo
higher than the seatbacks, and
placing articles on the rear package
tray is dangerous. During sudden
braking or a collision, objects can fly
around and become projectiles that
may hit and injure passengers. Don’t
stack cargo higher than the seatbacks
or place articles on the rear package
tray.
Securing Seats:
Adjustable seats that are not securely
locked are dangerous. In a sudden
stop or collision, the seat or seatback
could move, causing injury. Make
sure the adjustable components of the
seat are locked in place.
Unlocked Seatback:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After returning the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
Passenger on the Folded Seatback:
Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the
folded seatback while the vehicle is
moving is particularly dangerous. In
a sudden stop or even a minor
collision, a child not in a proper seat
or child-restraint system and seat belt
could be thrown forward, back or
even out of the car resulting in
serious injuries or death. The child or
other objects in the baggage area
could be thrown into other occupants
and cause serious injury. Never allow
a passenger to sit or stand on the
folded seatback while the vehicle is
moving.
Children and the Folding Rear Seats:
Playing with the folding rear seats is
dangerous. Once the seats are back
up, a child in the trunk would not be
able to get out the way they had
entered. If you have small children,
keep the seatbacks locked. Do not give
the car keys to children and do not
allow them to play in the vehicle.
NOTE
When returning a rear seat to its
original position, also replace the seat
belt to its normal position. Verify that
the seat belt pulls and retracts.
2-9
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 10 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
Split-Folding Rear Seatback
▼
The seatbacks can be folded down to
provide more space in the luggage
compartment.
To fo l d th e s e a t ba c ks
WARNING
Folding Seatbacks with Remote
Handle Levers:
Not checking the rear seat area before
folding the seatbacks with the remote
handle levers is dangerous. The rear
seat area is difficult to see from the
rear of the vehicle. Operating the
remote handle levers without
checking could cause injury to a
person when a seatback suddenly
flips forward. Make sure to check the
rear seat area before operating the
remote handle levers.
Operating the Remote Handle Levers
While a Rear-Facing Child-Restraint
System is in the Rear Seat:
Operating the remote handle levers
while a rear-facing child-restraint
system is in the rear seat is
dangerous. It could cause injury to a
child seated in the child-restraint
system when the seatback suddenly
flips forward. Always remove the
child-restraint system from the rear
seat before operating the remote
handle levers for the rear seat.
Be careful of the following when using
the remote handle levers:
•
•
1. Unfasten the lap portion of the rear
center seat belt (page 2-19).
Always unfasten the lap portion of the
belt before folding the rear-left
seatback. Leaving the lap portion of
the belt fastened could cause damage
to the seat belt, buckle and seatback.
2. After checking that the rear seats are
clear, open the trunk and pull the
remote handle levers on the left and
right.
CAUTION
On a downward slope, the seatback
could flip forward faster than on a
flat area.
On an upward slope, the seatback
may not fold down. When the
seatbacks cannot be folded down
with levers, pull the rear seatback
forward from inside the vehicle.
CAUTION
2-10
Form No. 8S11-EA-03G
Remote handle lever
WARNING
J56J_8S11-EA-03G_Edition1.book Page 11 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seats
To return the seatbacks to the upright
position
1. Lift the seatbacks upright. Pull on the
tops of the seatbacks from inside the
vehicle to make sure they are locked.
2. Fasten the rear-center lap/shoulder belt
and check that all seat belts are routed
properly for passenger use (page 2-19).
WARNING
Seat Belts Caught Under Seatbacks:
A seat belt caught under a seatback
after the seatback is returned to its
upright position is dangerous. In a
collision or sudden stop, the seat belt
cannot provide adequate protection.
Always make sure the seat belts are
fully pulled out from under the
seatbacks.
Armrest
▼
The armrest can be used or placed
upright.
Armrest
Positioning the Shoulder Belt Over
the Armrest:
Positioning the shoulder portion of a
rear seat belt over the armrest is
dangerous as it cannot provide
adequate protection in a collision and
could result in serious injuries. Never
position the shoulder portion of a rear
seat belt over the armrest.
2-11
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 12 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seat Belt Systems
Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way
when not in use.
The driver’s seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.
However, the front passenger’s seat and all rear lap/shoulder belt retractors operate in two
modes: emergency locking mode, and for child-restraint systems, automatic locking mode.
WARNING
Not Wearing Seat Belts:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown
out of the vehicle. They could be seriously injured or even killed. In the same
collision, occupants wearing seat belts would be much safer. Always wear your seat
belt and make sure all occupants are properly restrained.
Seat Belt Damaged During an Accident:
Using a damaged seat belt is dangerous. An accident could damage the belt webbing
of the seat belt in use. A damaged seat belt cannot provide adequate protection in a
collision. Whether a front seat was occupied or not, if the front air bags deployed the
pretensioners also deployed and both front seat belts must be replaced. Have an
Authorized Mazda Dealer inspect all seat belt systems in use during an accident
before they are used again.
Twisted Seat Belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt isn’t
available to absorb the impact. This puts more force on the bones beneath the belt,
which could cause serious injury or death. Don’t wear twisted seat belts.
One Belt, One Passenger:
Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way can’t spread the impact forces properly and the two passengers could be
crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time.
2-12
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 13 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seat Belt Systems
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep them
clean.
Ring
Pregnant Women and Persons with Serious Medical Conditions
▼
Pregnant women should wear seat belts. Ask your doctor for specific recommendations.
The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS.
The shoulder belt should be worn across your shoulder properly, but never across the
stomach area.
Persons with serious medical conditions also should wear seat belts. Check with your
doctor for any special instructions regarding specific medical conditions.
Form No. 8S11-EA-03G
2-13
J56J_8S11-EA-03G_Edition1.book Page 14 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seat Belt Systems
Emergency Locking Mode
▼
If the belt has fully retracted, it will always be in the emergency locking mode until you
move it into automatic locking mode by pulling the belt all the way out to its full length. In
the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision.
If the belt feels tight and hinders comfortable movement while the vehicle is stopped or in
motion, you may be in the automatic locking mode because you have pulled the belt too far
out. To return to the more comfortable emergency locking mode, wait until you can stop
the vehicle in a safe area, retract the belt fully to convert it back to emergency locking
mode and then again extend it around you.
Automatic Locking Mode
▼
Always use the automatic locking mode to keep the child-restraint system from shifting to
an unsafe position in the event of an accident. To get the seat belt into the automatic
locking mode, pull it all the way out and connect it as instructed on the child-restraint
system. It will retract down to the child-restraint system and stay locked on it. See the
section on child restraint (page 2-24).
2-14
Form No. 8S11-EA-03G
WARNING
WARNING
J56J_8S11-EA-03G_Edition1.book Page 15 Tuesday, June 24, 2003 6:29 PM
3-Point Type Seat Belt
Essential Safet y Equipment
Seat Belt Systems
NOTE
When using the rear center seat belt,
refer to "Rear Center Position Seat
Belt" (page 2-19).
Fastening the Seat Belts
▼
1. Grasp the buckle and tongue.
2. Slowly pull out the lap/shoulder belt.
Belt
Tongue
3. Insert the tongue into the buckle until
you hear a click.
Tongue
Buckle
Positioning the Shoulder Portion of
the Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
4. Make sure the shoulder belt is snugly
fitted against your body.
Take up slack
Keep low on
hip bone
Too high
Positioning the Lap Portion of the
Seat Belt:
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
2-15
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 16 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seat Belt Systems
Unfastening the Seat Belts
▼
Depress the button on the buckle.
NOTE
If a belt does not fully retract, inspect it
for kinks and twists. If it is still not
retracting properly, have it inspected at
an Authorized Mazda Dealer.
Shoulder Belt Adjuster
▼
Adjust the height of the shoulder belt if
the seat belt touches your neck, or if it
crosses your arm instead of your shoulder.
To raise the shoulder belt adjuster, push
the adjuster up. To lower the shoulder belt
adjuster, pull the button and slide it down.
Make sure the adjuster is locked.
Shoulder belt
adjuster
WARNING
Positioning the Shoulder Portion of
the Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
2-16
Form No. 8S11-EA-03G
WARNING
J56J_8S11-EA-03G_Edition1.book Page 17 Tuesday, June 24, 2003 6:29 PM
Front Seat Belt
Pretensioner and Load
Limiting Systems
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems.
In moderate or greater frontal or nearfrontal accidents, the front air bag and
pretensioner systems deploy
simultaneously. The pretensioners take up
slack in the front seat belts as the air bags
are expanding. The seat belt pretensioner
system will only activate when a front seat
belt is properly fastened around the
occupant. The load limiting system
releases belt webbing in a controlled
manner to reduce belt force on the
occupant’s chest.
Incorrect Positioning of the Driver
and Front Passenger Seat Belts:
Incorrect positioning of the driver
and passenger seat belts is dangerous.
Without proper positioning, the
pretensioner and load limiting
systems cannot provide adequate
protection in an accident and this
could result in serious injury. Wear
seat belts only as recommended in
this owner’s manual.
Expended Seat Belt Pretensioners:
Use of front seat belts with the
pretensioner system expended is
dangerous.
The seat belt pretensioners will only
function once. After they are
expended, they will not work again
and both must be replaced
immediately.
If the seat belt pretensioners are not
replaced, the risk of injury in a
collision will increase.
Always have an Authorized Mazda
Dealer inspect the seat belt
pretensioners and air bags after any
collision. The seat belt pretensioners
and air bags must be replaced after
any collision, which causes them to
deploy.
Essential Safet y Equipment
Seat Belt Systems
2-17
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 18 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seat Belt Systems
WARNING
Modification or Testing of the
Pretensioner System:
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable which
would prevent it from activating in an
accident. The occupants could be
seriously injured. Never modify the
components or wiring, or use
electronic testing devices on the
pretensioner system.
Pretensioner System Disposal:
Improper disposal of the pretensioner
system or a vehicle with nondeactivated pretensioners is
dangerous. Unless all safety
procedures are followed, injury could
result. Ask an Authorized Mazda
Dealer how to safely dispose of the
pretensioner system or how to scrap a
pretensioner-equipped vehicle.
NOTE
The pretensioner system will only
•
activate in a moderate or greater
frontal or near-frontal collision. It
will not activate in most rollovers,
side or rear impacts.
Some smoke (non-toxic gas) will be
•
released when the air bags and
pretensioners deploy. This does not
indicate a fire. This gas normally
has no effect on occupants,
however, those with sensitive skin
may experience light skin irritation.
If residue from the deployment of
the air bags or the front pretensioner
system gets on the skin or in the
eyes, wash it off as soon as possible.
2-18
Form No. 8S11-EA-03G
J56J_8S11-EA-03G_Edition1.book Page 19 Tuesday, June 24, 2003 6:29 PM
Air Bag/Front Seat Belt
▼
Pretensioner Systems Warning
Light
Rear Center Position Seat
Belt
Before using the rear-center lap/shoulder
belt make sure tongue (A) and anchor
buckle (B) are fastened.
Essential Safet y Equipment
Seat Belt Systems
(A)
If the air bag/front seat belt pretensioner
system is OK, the warning light
illuminates when the ignition switch is
turned to the ON position or after the
engine is cranked. After about 6 seconds it
goes out.
A system malfunction is indicated when
the warning light constantly flashes, stays
on or doesn’t illuminate at all when the
ignition switch is turned to the ON
position. If any of these occur, consult an
Authorized Mazda Dealer as soon as
possible. The system may not work in an
accident.
WARNING
Self-Servicing the Air Bag/
Pretensioner Systems:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled. This
could cause serious injuries. Never
tamper with the systems and always
have an Authorized Mazda Dealer
performs all servicing and repairs.
(B)
Fastening the Seat Belt
▼
1. Grasp the buckle (D) and tongue (C).
2. Slowly pull out the lap/shoulder belt.
3. Insert the tongue (C) into the buckle
(D) until you hear a click.
(C)
(D)
(A)
(B)
Form No. 8S11-EA-03G
2-19
J56J_8S11-EA-03G_Edition1.book Page 20 Tuesday, June 24, 2003 6:29 PM
Essential Safet y Equipment
Seat Belt Systems
Unfastening the Seat Belt
▼
WARNING
Fastening the Rear-Center Seat Belt
with Only One Buckle:
Fastening the rear-center seat belt
with only one buckle is dangerous. If
only one pair of seat belt tongue and
buckle, either tongue (A) and anchor
buckle (B) or tongue (C) and anchor
buckle (D), is fastened, the seat belt
cannot provide full protection. In a
sudden stop or collision, the user
could slide under the belt and suffer
serious injuries. Always make sure
that both pairs of seat belt tongues
and buckles are fastened properly.
Positioning the Shoulder Portion of
the Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
Depress the button on the buckle.
Unfastening the Lap Portion of
▼
the Seat Belt
Insert a small object in the anchor buckle
(B) slot, such as a key.
(A)
(B)
4. Make sure the shoulder belt is snugly
fitted against your body.
WARNING
Positioning the Lap Portion of the
Seat Belt:
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
2-20
Form No. 8S11-EA-03G
CAUTION
Always unfasten the lap portion of the
belt before folding the rear-left
seatback. Leaving the lap portion of
the belt fastened could cause damage
to the seat belt, buckle and seatback.
Loading...
+ 272 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.