Maytronics Classic 4-UNI, Top 4-UNI Instructions Manual

EN

Robotic Pool Cleaner Classic 4 / Top 4 - UNI

User Instructions

Contents

1. INTRODUCTION ....................................................................... 2

2. SPECIFICATIONS ...................................................................... 2

3. WARNINGS AND CAUTIONS ................................................... 2

3.1. Warnings ............................................................................ 2

3.2. Cautions ............................................................................. 2

4. POOL CLEANER PARTS ............................................................ 3

5. USING THE POOL CLEANER .................................................... 4

5.1. Setup.................................................................................. 4

5.2. Putting the Pool Cleaner into the pool .............................. 5

5.3. Removing the Pool Cleaner from the pool ........................ 6

6. CLEANING THE FILTER BAG OR CARTRIDGES ....................... 7

6.1. Removing and cleaning the filter bag ................................7

6.2. Replacing the filter bag .....................................................8

6.3. Cleaning the filter cartridges .............................................8

6.4. Cleaning the impeller ........................................................10

7. OFFSEASON STORAGE ............................................................ 10

8. TROUBLESHOOTING ................................................................ 11

1

Robotic Pool Cleaner

User Instructions

1. INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and

cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface
climbing brush enhance maximum pool hygiene.

Robotic Pool Cleaners by Maytronics deliver advanced cleaning technology, long lasting performance
and easy maintenance. You and your family will be free to enjoy your swim with the full confidence
that it is completely clean.

2. SPECIFICATIONS

Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft

3. WARNINGS AND CAUTIONS

3.1. Warnings

• Use the originally supplied power supply only

• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)

• Keep the power supply out of standing water

• Position the power supply at least 3m/10ft away from the edge of the pool

• Do not enter the pool while the Pool Cleaner is working

• Unplug the power supply before servicing

3.2. Cautions

When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:

Chlorine Max 4 ppm

pH 7.0 - 7.8

Temperature 6°-34°C / 43°-93°F

NaCl Maximum = 5000 ppm

2

Robotic Pool Cleaner Classic 4 / Top 4 - UNI

| User Instructions

4. POOL CLEANER PARTS

Robotic Pool Cleaner Classic 4 - UNI

Brushes

C o m b i ned B r us h

All surface climbing brush,
ideal for most pools surfaces

Optional Brushes Optional Brushes

Robotic Pool Cleaner Top 4 - UNI

C o m b i ned B r us h

All surface climbing brush,
ideal for most pools surfaces

P V C B r us h

For concrete, PVC,
fiberglass and liner

Power Supply unit

Filtration Options

W o nd er B r us h

For smooth ceramics

P V C B r us h

For concrete, PVC,
fiberglass and liner

W o nd er B r us h

For smooth ceramics

F r a m e C a r t r i d g es a nd 4 ul t r a - fine fil t er s Sp r i ng c l ea n- up fil t er sB ut t o m l i d a nd fil t er B a g

Robotic Pool Cleaner Classic 4 / Top 4 - UNI | User Instructions

3

5. USING THE POOL CLEANER

The Pool Cleaner is very easy to use. Just follow the simple steps to get started, and your Pool Cleaner
is ready to go.

5.1. Setup

Before using the Pool Cleaner for the first time perform the following steps:

Unwind the cable and stretch it out
completely so that it has no kinks.

3m/10ft

Position the power supply so that it
is approximately in the middle of the
long side of the pool at a distance of
3m/10ft.

2

1

Some models arrive with plastic coverings on the brushes.
Remove them before use.

Attach the floating cable to the power supply
by inserting it with the notch on the connector (1)
lined up with the groove in the socket on the
power supply and turning clockwise (2).

4

Robotic Pool Cleaner Classic 4 / Top 4 - UNI

Plug in the power supply and leave it in the
OFF position.

| User Instructions