User’s instructions to use the Bluetooth® communication in order to operate MyDolphin™ application features.
“Contains FCC ID: WCH99956035“.
Connect the robot’s power-supply to the mains.
Connect your Smartphone to the internet, and download Maytronics MyDolphin™ application from Apple or Android App Store, according to the relevant Smartphone.
“User authentication procedure” :
Please enter the application, click on the robot that appears on the Smartphone screen (serial number) Login using your e-mail address and choose a password.
Proceed to Bluetooth® pairing on your Smartphone.
The Smartphone Identifies the robot and initiates a pairing sequence.
Now the strong signal transmitter communicates remotely with the power supply via Bluetooth®.
Main screen window shows operational status and information, including remaining cycle time and selected cleaning mode.
Buttons on lower half of the screen represent the available operational modes: cleaning mode, manual drive, cycle time, weekly timer, info/links, and delay mode.
Choose the mode you want to operate.
Cleaning mode:
You can choose between different operation options such as: Floor Only, Regular mode or others.
Manual Mode:
To manually clean specific areas of your pool.
You can also switch to Tilt mode for a realistic experience.
Cleaning Cycle Time:
You can choose between different cleaning cycle times.
Weekly Timer:
Use this mode to choose the days and hours during the week that the robot will operate.
Delay Mode:
Use this mode to delay the start of the robot operation.
You can exit the application by touching the X on the Smartphone upper-left screen and choosing OK to close
“MyDolpin™”
Loading...