Maytronics Dolphin Hybrid RS 1 Instructions Manual
Dolphin Hybrid RS 1 - Suction Pool Cleaner | Operating Instructions
1
Contents
The Dolphin Hybrid RS 1 Suction Cleaner .......2
Parts .................................................................. 2
Warnings ...........................................................3
Specifications ...................................................3
Water conditions ..............................................3
Pool Preparation ............................................... 3
Setup ................................................................3
Cleaning Process ..............................................6
Clean the Leaf Canister ....................................6
Removal from the Pool and Storage ................7
Troubleshooting ...............................................7
Dolphin Hybrid RS 1 -
Suction Pool Cleaner
Operating Instructions
EN
2
Dolphin Hybrid RS 1 - Suction Pool Cleaner | Operating Instructions
Dolphin Hybrid RS 1 Suction Pool Cleaner
Operating Instructions
The Dolphin Hybrid RS 1 Suction Cleaner
The Dolphin Hybrid Cleaner is powered by the pool pump. For successful cleaning results, make
sure that you connect the cleaner properly to the pool system.
Follow the instructions in this booklet for easy, efficient, and safe operation.
Parts
The Dolphin Hybrid Cleaner kit includes:
1
Dolphin Hybrid Cleaner
2
Hose Sections (1.17m/3.83ft x 10)
3
Flow Indicator
4
90° Adapter
5
Float
6
Skimmer Adapter
7
Automatic Safety Valve
8
Leaf Canister (optional)
For proper operation, the hose must be long
enough to reach from its pool connection to
the most distant edge of the pool, plus two
extra sections (Drawing A). If needed, you
can purchase additional hose sections from
your supplier. Replacement parts are also
available.
1
5
7
3
4
6
2
8
min
max
(Optional)
Skimmer
Pool
Two extra
hose sections
A
Dolphin Hybrid RS 1 - Suction Pool Cleaner | Operating Instructions
3
Warnings
• Do not enter the pool while the cleaner is working.
• Maytronics is not responsible for any damage to the external pump.
Specifications
• Weight – 4.5 kg / 9.9lb
• Hose length – 10 Hoses of 1.17m / 3.83ft
• Required water flow – 5-8m
3
Water conditions
• Chlorine – Max 4ppm
• pH – 7.0-7.8
• NaCl – Max – 5000ppm
• Temperature – 6-34°C / 43-93°F
NOTE:
An optional Leaf Canister is also available for purchase from your supplier.
The Leaf Canister traps leaves and other large debris, preventing blockage of the
pool filter system. For maximum energy, backwash savings and environmentally
friendly operation, we recommend using the Leaf Canister.
Pool Preparation
To prepare the pool for cleaning:
1
Remove any large
objects that might
interfere with the
cleaner’s operation.
2
Make sure that the
water level reaches
the skimmers.
3
Backwash the pool
filter and make sure
that suction pressure
is sufficient, as
recommended by the pump manufacturer.
Setup
Connect the Hose
The Dolphin Hybrid Cleaner connects to the pump of your pool, either by a built-in dedicated
suction line or through one of the pool skimmers.
Connect the Hose Sections in the pool under water.
1
Switch the pool pump OFF.
2
Insert the flexible Skimmer Adapter (only if needed) into the suction line opening and make sure
to connect the Automatic Safety Valve. (Allows water flow into the pump in case the Cleaner is
blocked by a forgien object).
Connecting to Skimmer Connecting to Suction Line
First
Hose
Section
Safety Valve
Suction
Line
Skimmer
Adapter
First
Hose
Section
Safety Valve
Skimmer
Adapter
Suction Line
B
Loading...