Maytronics Dolphin Bio Suction Instructions Manual

www.maytronics.com

by

Dolphin Bio Suction

Bio_cover_English_8151191.indd 4 1/12/12 5:03 PM

by

8151191

User Manual Instructions

Dolphin Bio Suction

Bio_cover_English_8151191.indd 1 1/12/12 5:03 PM

Bio_cover_English_8151191.indd 3 1/12/12 5:03 PM

Contents

1. INTRODUCTION ..................................................................... 2

2. SPECIFICATIONS .................................................................... 2

3. WARNINGS AND CAUTIONS ................................................. 2

3.1. Warnings .......................................................................... 2

3.2. Cautions .......................................................................... 2

4. POOL CLEANER PARTS .......................................................... 3

5. USING THE POOL CLEANER .................................................. 4

5.1. Caddy assembly .............................................................. 4

5.2. Caddy and power supply positioning .............................4

5.3. Connecting the power supply ......................................... 5

5.4. Putting the robot pool cleaner into the pool .................. 5

5.5. Removing the robot from the pool

5.6. Cleaning the filter cartridges ........................................... 7

5.7. Dismantling and cleaning the impeller ............................9

5.8. Storage instructions ......................................................... 9

6. USING THE EXTERNAL SUCTION PIPE .................................. 9

7. USING THE REMOTE CONTROL ............................................12

7.1. The Control Panel ...........................................................12

7.2. Setting the Automatic Mode ........................................... 13

7.3. Manual direction control mode ....................................... 14

8. DIGITAL SWITCH-MODE POWER SUPPLY ............................. 15

8.1. Setting The Weekly Timer ............................................... 15

8.2. Full filter bag indicator ....................................................15

9. TROUBLESHOOTING ............................................................. 16

10. CADDY ASSEMBLY INSTRUCTIONS .......................................17

Dolphin Bio Suction

User Instruction Manual

Bio_English_8151191.indd 1 1/12/12 6:26 PM

................................. 6

2

Dolphin Bio Suction | User Instructions Manual

1. INTRODUCTION

1. The Dolphin Bio suction pool cleaner expertly cleans biological and nature swimming pools.
As a result, it has been designed to handle large amounts of algae and dirt.

2. The robot can be operated in two modes:

Operation without external suction (regular mode - the robot collects dirt in built-in filtration
cartridges .

Operation with an external suction source: It is recommended to consult your dealer before
connecting the robot to an external pump.

Intended for pools with large amounts of algae and dirt. Dirt collected by the robot is transferred
through a pipe connected to an external pump and a filter. The pipe can be connected to virtually
any standard pool pump.

• In this mode, the external pump must be turned on throughout the robot’s operation.

3. The robot has a weekly timer option which allows the cleaning schedule to be set for the coming
week.

4. The default work cycle time is 3 hours.

5. Using the remote control, the work cycle time can be changed to 2 or 4 hours, according to the
pool’s specific cleaning requirements.

2. SPECIFICATIONS

Motor protection: IP 68
Minimum pool depth: 0.80m (2.6ft)
Maximum pool depth: 5m (16.4ft)
Water temperature: 6-34°C (43-93°F)

3. WARNINGS AND CAUTIONS

3.1.

Warnings

• Use only the original power supply provided with the robot.

• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI).

• Keep the power supply out of standing water.

• Position the power supply at least 3m (10ft) away from the edge of the pool.

• Do not enter the pool while the robot is working.

• Unplug the power supply before servicing or cleaning the robot.

• Do not attempt to use the robot to clean a pool that has stones on the floor. This voids the
warranty.

• Maytronics is not responsible for any damage to the external pump.

• Maytronics is not responsible for damage done to pool vegetation.

3.2.

Cautions

• When not in use, store the robot on its Caddy in a shaded area.

• Extreme cold and frost can damage the robot. In the winter, always store the robot in a
protected place.

• Use the robot in water whose temperature is between 6-34°C (43-93°F) only.

Bio_English_8151191.indd 2 1/12/12 6:26 PM

)

Bio_cover_English_8151191.indd 3 1/12/12 5:03 PM