Maytag PSH4BF-KAB Technical Literature

TECHNICAL SPECIFICATIONS

Model PSH4BF-KA/B Series

M1200 Product Line

Ultra High Efficiency Heat Pumps
16 SEER — 2 - 5 Ton Capacity

2

The PSH4BF-KA/B Series of

Maytag heat pumps offers
exceptional performance

as well as environmental

protection. These models,

when matched with our
variable speed air handlers or
variable speed equipped gas

furnaces, offer a line of high

quality heat pump systems

rated up to 16 SEER and 9
HSPF.

Features and Benefits

• CoreSenseTM Compressor Protection – Control module actively monitors
compressor conditions and will shut the unit down to prevent damage.

• Copeland Scroll Ultra Tech

operates with 2 stages of heating and cooling capacities to provide
superior comfort and efficiency. Copeland’s proven and simple design
equates to years of comfort and reliability for the homeowner with
virtually silent operation.

• Quiet Plus

Sound Blanket and a Swept Wing Fan Blade. Both have been engineered
to significantly reduce unwanted noise.

• Designed using Stainless Steel – Durable brushed stainless steel protects
the coil from yard hazards and extreme weather. Unit is trimmed in a
silicone-protected polyester finish with a 950 hour salt spray finish that
resists corrosion 50% better than comparable units.

• Copper Tube / Aluminum Fin Coils – Coils are designed to optimize heat
transfer, minimize size and cost, and increase durability and reliability.

TM

Sound Package – Consists of a Quiet Plus

TM

Compressor – The Ultra Tech Compressor

TM

Compressor

• Composite Base Pan – Absorbs sound and is corrosion resistant.
Composite is

• Removable Top Grille Assembly – Allows ease of service from the top
without disconnecting fan motor leads.

• High Pressure Switch – Protects against abnormally high system
pressures. Auto-reset feature prevents nuisance service visits.

• Low Pressure Control – Loss of charge protection ensures long
compressor life.

• Liquid Line Filter / Drier – Included with unit, field installed.

• One Piece Top/Orice – Designed for maximum airflow and quiet

operation.

• Common Suction Service Port – This port allows the contractor to read
the suction pressure in all modes of operation without removing any
panels, saving time and increasing serviceability.

• Three Minute Restart Time Delay – When the unit shuts down, a three
minute
delay keeps the unit from restarting, eliminating the highest cause for
compressor failure.

• Suction Accumulator and Crankcase Heat – Protection from liquid flood
back and future compressor failures.

also stronger and lighter than steel.

• Hot Gas Mufer – Reduces compressor noise and vibration.

• Easy Compressor and Control Access – Designed to make servicing easier

for the contractor, access panels are provided to all controls and the
compressor from the side of the unit.

• Demand Defrost – Provides additional energy savings in heating by
defrosting only when necessary.

3

DIMENSIONS/OUTDOOR SECTION

PSH4BF 024KB 036KA 048KA 060KA

H 45 1/2 45 1/2 45 1/2 45 1/2

W 31 1/4 31 1/4 31 1/4 31 1/4

D 31 1/4 31 1/4 31 1/4 31 1/4

D

W

IDENTIFICATION CODE

H

P - Premier

S - Split

H - Heat Pump

4

P S H 4 B F - 036 K A

Generation 1, 2, 3, etc.

Product

Identier

BF = Braze

15 - 17 SEER

Revision

Electrical Code

K = 208/230-60-1

Nominal Capacity

(000) BTU