Maytag PPG3GD Technical Literature

TECHNICAL SPECIFICATIONS

Model PPG3GD Series

M1200 Product Line

Single Packaged Gas/Electric Units 13 SEER, 80% AFUE — 2 - 5 Ton Units

The PPG3GD Series packaged gas/electric units are high efﬁciency self contained heating and cooling systems that can be installed on the roof or on a slab. The convertible unit design makes installations simple in all applications. Units are ETL and ETLc listed. The unit is truly designed with the contractor and the consumer in mind.

Features and Beneﬁts

• Quality Compressor: State of the art Copeland Scroll compressor is standard equipment.

• Compressor Sound Blankets: standard equipment

• Proven, Industry Standard Components: Easier service and

availability.

• High/Low Pressure Switch: Added compressor protection.

• Micro-channel Coils: Both indoor and outdoor all aluminum

coils are designed to optimize heat transfer, minimize size and cost, increase durability and reliability, and reduce corrosion.

• Liquid Line Filter Drier: Factory installed at a convenient location for service.

• Externally Accessible Service Ports: Quick access to refrigerant system without disrupting operation.

• Compact Footprint/Low Proﬁle: Easy to handle and transport.

• Heavy-Gauge Full Perimeter Base Rails: Facilitates forklift

handling and curb mounting.

• Convertible Air Delivery: Horizontal or downﬂow to accommodate rooftop or horizontal application.

• Galvanized Steel Cabinet: Polyurethane ﬁnish provides 950 hour salt spray protection to resist corrosion.

• Wire Guard Coated with Earth Friendly Epoxy and Mesh Hail Guard: Will never rust and protect the coil from being damaged

by balls, lawnmowers, hail etc.

• Access to Controls and Major Components: Easy in and out service.

• Low Voltage Transformer: Includes 3 Amp fuse to protect low voltage circuit.

• Corrosion-Resistant Drain Pan: Quickly drains away evaporator condensate.

• One Piece Top for Great Fit and Finish, Total Seal: Well designed, quality construction. Drip edge on top panels whisks away rainwater. Embossed bottom pan keeps blower component compartment dry.

• Quiet Operation: Low vibration. 20” fan blade combined with custom venturi condenser fan.

• SmartStart

using hot surface ignition technology. Programmed to learn the heat-up characteristics of the igniter, then adapt the ignition time to the characteristics of the furnace so the igniter is energized appropriately.

Control Board: Provides extended life to igniters

• Hot Surface Igniter: Innovative application of an appliance type igniter with a 20 year history of reliability.

• Accessories: Roof curbs and more.

IDENTIFICATION CODE

13.50

13.31

3/4" NPT

FEMALE DRAIN

CONNECTOR

DOWNFLOW

SUPPLY DUCT

OPENING

DOWNFLOW

RETURN DUCT

OPENING

23.50

45.75

13.50

47.50

INSIDE PERIMETER

OF BASE RAIL

(IF USED)

2.63

P PG 3 G D X 24 K 072 X

P = Premier

PG = Packaged 3 = Series

DIMENSIONS

G = Gas

D = 13 SEER

X=TXV

0=Restrictor

Electrical Code

K = 208/230-60-1

Cooling Capacity

(00) Btu

X = NOx C = Standard

Heating Capacity

(000) Btu

† Denotes “C” or “X”

Top View

Model

Number

PP3GD

024K045† 397 413 26.5 26.5 35.0 31.3 024K072† 405 421 26.0 26.5 35.0 31.3

030K045† 398 414 26.5 26.5 35.0 31.3

030K072† 406 422 26.0 26.5 35.0 31.3

036K072† 403 419 26.5 26.5 35.0 31.3

036K096† 411 427 26.5 26.5 35.0 31.3

042K072† 435 453 27.0 26.5 39.0 35.3

042K096† 443 461 27.0 26.5 39.0 35.3

048K096† 453 470 27.5 26.5 39.0 35.3

048K120† 461 478 27.5 26.5 39.0 35.3

X60K096† 472 489 27.5 26.5 43.0 39.3 X60K120† 480 497 27.5 26.5 43.0 39.3

Unit

Weight

Shipping

Weight

Center of Gravity Height in inches (C)

A B with base rails without base rails

+ 8 hidden pages