Maytag MVWX500BW0, 7MMVWH450DW0 Owner’s Manual

TOP=LOADING

HiGH EFFiCiENCY

LOW=WATER WASHER

USE AND CARE GUIDE

Para una versi6n de estas instrucciones en espa_ol, visite www.maytag.com

GUIDE D'UTILISATION

ET D'ENTRETIEN DE LA LAVEUSE HAUTE

EFFICACIT( =.,_FAIBLE

CONSOMMATION D'EAU

AVEC CHARGEMENT PAR

LE DESSUS

Table of Contents

WASHER SAFETY ............................................................. 2

WHAT'S NEW UNDER THE LID? ..................................... 3

CONTROL PANEL AND FEATURES ................................ 4

CYCLE GUIDE ................................................................... 6

USING YOUR WASHER .................................................... 7

WASHER MAINTENANCE .............................................. 10

TROUBLESHOOTING ..................................................... 12

WARRANTY ..................................................................... 17

ASSISTANCE OR SERVICE ........................ BACK COVER

Table des mati_res

S¢:CURIT¢: DE LA LAVEUSE .......................................... 18

QUOI DE NEUF SOUS LE COUVERCLE? ..................... 19

TABLEAU DE COMMANDE ET

CARACTC:RISTIQUES ..................................................... 20

GUIDE DE PROGRAMMES ............................................ 22

UTlUSATION DE LA LAVEUSE ...................................... 23

ENTRETIEN DE LA LAVEUSE ........................................ 26

DF:PANNAGE ................................................................... 29

GARANTIE ....................................................................... 35

ASSISTANCE OU SERVICE ...... COUVERTURE ARRI#RE

W10560155B W10560156B =SP

Designed to use only HE High Efficiency detergents.

Congue pour I'utilisation d'un d6tergent haute efficacit6 seulement.

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey aft safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or

explode.

[]

Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. Ifthe hot water system has not been used for such a period, before using the washing

machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructions for grounding instructions.

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

WHAT'S NEW UNDER THE LID?

Cleaning with Less Water

Traditional agitator-style

washer

The most striking difference in your new washer is the low-water washplate wash system. The washer automatically adjusts the

water level to the load size--no water level selector is needed.

Washer with low-water

washplate wash system

Automatic Load Size Sensing

Once you start the cycle, the lid will lock, and the washer will begin the sensing process to determine the correct water level

for the load. This may take several minutes before water is added. You will find a step-by-step description in the "Cycle

Status Lights" section.

You will hear the motor turn the basket in short pulses to thoroughly wet the load. This low-water wash method uses

less water and energy compared to a traditional agitator-style washer.

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency." Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance.

Follow the manufacturer's instructions to determine the amount of detergent to use.

For best performance, it is recommended to load garments in loose heaps evenly around the washplate.

As the washer dampens and moves the load, the level of the garments will settle in the basket. This is normal, and does not

indicate that more garments should be added. IMPORTANT: You will not see a washer basket full of water

as with your past agitator-style washer. It isnormal for some of the load to be above the water line.

Use only High Efficiency (HE) detergent.

Concentrated Cleaning

Low-water cleaning means concentrated cleaning. Rather than diluting detergent as done in an agitator-style washer, this washer delivers the detergent directly to the soils.

Norma Sounds You Can Expect

At different stages of the wash cycle, you may hear sounds and noises that are different from those of your previous washer. For example, you may hear a clicking and hum at the beginning of the cycle, as the lid lock goes through a self-test. There will be different kinds of humming and whirring sounds as the washplate moves the load. And sometimes, you may hear nothing at all, as the washer determines the correct water level for your load or allows time for clothes to soak.

CONTROL PANEL AND FEATURES

deep water wash s / \ _,hand wash

power wash I _I cold wash

bulky/ nerrnat sheets wrinkle control

off on

soil [eve[ wash temp

Not all features and options are available on all models.

O SOIL LEVEL

Select the most suitable setting for your load. For heavily soiled and sturdy fabrics, select Extra Heaw Soil Level for more wash time, if needed. For lightly soiled and delicate fabrics, select Light Soil Level for less wash time, if needed.

Lighter soil level setting will help reduce tangling and

wrinkling. WASH TEMP

Wash Temp senses and maintains uniform water temperatures by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric and soils being washed. For best results and following the garment label instructions, use the warmest wash water safe for your fabric.

• On some models and cycles, warm and hot water may be cooler than your previous washer.

• Even in a cold and cool water wash, some warm water may be added to the washer to maintain a minimum

temperature.

WASH CYCLE KNOB

Use the Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load. See "Cycle Guide" for detailed descriptions.

CYCLE OPTIONS

The following options may be added to most cycles.

EXTRA RINSE

This option can be used to automatically add a second rinse to most cycles.

FABRIC SOFTENER ADDED

This option must be set to "On" if using fabric softener.

START/PAUSE/UNLOCK BUTTON

Press to start the selected cycle; press again to pause the cycle and unlock the lid. Press and hold 3 sec to cancel a cycle.

NOTE: If the washer is spinning, it may take several minutes to unlock the lid. Press and hold 3 sec to cancel a cycle.

Appearance may vary.

CYCLE STATUS LIGHTS

The Cycle Status Lights show the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are different from traditional washers.

extra rinse

P_werWash

,'_._" SFSTEM

SENSING

When the START/Pause/Unlock button is pressed, the washer will first perform a self-test on the lid lock mechanism. You will hear a click, the basket will make a slight turn, then lid will unlock briefly before locking again.

Once the lid has locked the second time, the washer will use short, slow spins to estimate the load size. These sensing spins may take 2 to 3 minutes before water is added to the load and you may hear the hum of these spins. Ifthe Sensing light is on, the washer is working properly. You will hear the motor turn the basket in short pulses to thoroughly wet the load. The washer will then move the load briefly, pause to allow water to soak into the load, and resume adding water. This process may repeat until the correct amount of water has been added for the load. You may also hear water flowing through the dispenser, adding detergent to the load.

NOTE: Avoid opening the lid during sensing. The sensing process will start over when the washer is restarted. The Sensing light may also come on during the Wash portion of the cycle. This is normal.

WASH

seesin8 wash rinse spin dene lid lecked

You will hear the motor and washplate moving the load. Unlike traditional washers, the load is not covered with

water. Low-water cleaning means concentrated cleaning. Rather than diluting detergent as done in an agitator-style washer, this washer delivers the detergent directly to the soils. The motor sounds may change at different stages in the cycle. The wash time is determined by the selected

soil level.

RINSE

sensingwash rinse spin done lidlocked

LID LOCKED

seosing wash rinse spin done lidlocked

You will hear sounds similar to the wash cycle as the washer rinses and moves the load. Fabric softener will

be added if the Fabric Softener-On option was selected. Some cycles will use a spray rinse.

SPiN

sensing wash rinse spin done [idlocked

The washer spins the load at increasing speeds for proper water removal, based on the selected cycle and spin speed.

DONE

sensing wash rinse spin done lidlocked

Once the cycle is complete, this light will come on. Remove the load promptly for best results.

To allow for proper load sensing and spinning, the lid will lock and the Lid Locked light will turn on. This light indicates that the lid is locked and cannot be opened.

If you need to open the lid, press START/Pause/Unlock. The lid will unlock ( I_11_ start

once the washer movement has stopped. \ "'/p_0,e/o,tock

W hold 3 _ec

This may take several minutes if the load .........

was spinning at high speed. Press START/ Pause/Unlock again to resume the cycle. Avoid opening the lid during sensing. The sensing process

will start over when the washer is restarted.

CYCLE GUIDE

For best fabric care, choose the cycle that best fits the load being washed. Recommended settings for best performance are shown in Bold. Not all cycles and options are available on all models.

Sturdy fabrics, colorfast Power Wash® Hot High Use this cycle for heavily soiled or sturdy items. Water-level sensing

items, towels, jeans Warm process may take longer for some items than for others because they will

Casual and mixed loads, Deep Water Hot Low Provides additional water and alternating wash action for heavily soiled jeans, towels, sturdy Wash Warm mixed loads. Water-level sensing process may take longer for some items fabrics Cool than for others because they will absorb more water than other fabric types.

Largeitems such as Bulky/Sheets Hot High Use this cycle to wash large items such as jackets and small comforters. sheets, sleeping bags, Warm The washer will fill with enough water to wet down the load before the wash small comforters, jackets, Cool portion of the cycle begins, and uses a higher water level than other cycles. small washable rugs Cold

Cottons, linens, and Normal Hot High Use this cycle for normally soiled cottons and mixed fabric loads. This

mixed garment loads Warm cycle uses spray rinses.

No-iron fabrics, cottons, Wrinkle Control Hot Low Use this cycle to wash loads of no-iron fabrics such as sport shirts,

perm press, linens, Warm blouses, casual business clothes, permanent press, and blends. synthetics Cool

Machine-wash silks, Hand Wash Hot Low Use this cycle to wash lightly soiled garments indicating "Machine

handwash fabrics Warm Washable Silks" or "Gentle" cycle on the care label. Place small items in

Bright or darkly colored Cold Wash Cold High Cold water with an additional wash action gently lifts stains while caring for cottons, linens, casual fabrics. Settings may be adjusted as desired, but must use only cold water and mixed loads settings.

Heavily soiled fabrics Soak Hot No Spin Use this cycle to soak small spots of set in stains on fabrics. The

Swimsuits and items Rinse & Cold rinse only High Combines a rinse and high speed spin for loads requiring an

requiring rinsing Spin additional rinse cycle or to complete a load after power interruption. without detergent Also use for loads that require rinsing only.

Hand-washed Drain & N/A High This cycle uses a spin to shorten drying times for heavy fabrics or garments or Spin special-care items washed by hand. Use this cycle to drain washer dripping wet items after cancelling a cycle or completing a cycle after a power failure.

No clothes in washer LowClean Washer

with

affresh®

NOTE: If you are using fabric softener, be sure to select the Fabric Softener-On option. *All rinses are cold.

Cool absorb more water than other fabric types. Cold

Tap Cold

Cold

Tap Cold

Cool Cold

Tap Cold

Cold

Tap Cold

Cool mesh garment bags before washing. This cycle uses a higher, preset water Cored level.

Tap Cold

Warm washer will use intermittent agitation and soaking. After time has

Cool expired, water will drain, but the washer will not spin. Cycle is

Cold complete.

Tap Cold

Hot

Warm

Cool Cold

Tap Cold

Use this cycle every 30 washes to keep the inside of your washer fresh and clean. This cycle uses a higher water level. Use with affresh®Washer Cleaner tablet or liquid chlorine bleach to thoroughly clean the inside of your washer. This cycle should not be interrupted. See "Washer Care."

IMPORTANT: Do not place garments or other items in the washer during the Clean Washer with affresh®cycle. Use this cycle with an empty wash tub.

USmNG YOUR WASHER

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

1, Sort and prepare your laundry

• Empty pockets. Loose change, buttons, or any small object can pass under the washplate and become trapped, causing unexpected sounds.

• Sort garments by recommended cycle, water temperature, and colorfastness.

• Separate heavily soiled garments from lightly soiled.

• Separate delicate garments from sturdy fabrics.

• Do not dry garments if stains remain after washing, because heat can set stains into fabric.

• Treat stains promptly.

• Close zippers, fasten hooks, tie strings and sashes, and remove non-washable trim and ornaments.

• Mend rips and tears to avoid further damage to garments during washing.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

f2, Add laundry products

Single-dose laundry packet, color-safe bleach, Oxi-type booster, or fabric softener crystals can be added to the basket prior to adding laundry.

NOTE: Do not add clothes to washer basket prior to adding laundry products. Always follow manufacturer's instructions.

Helpful Tips:

= When washing water-proof or water-resistant items, load

evenly. See "Cycle Guide" for tips and more information on using the Bulky cycle.

• Use mesh garment bags to help avoid tangling when washing delicate or small items.

• Turn knits inside out to avoid pilling. Separate lint-takers from lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint from towels, rugs, and chenille fabrics.

Always read and follow fabric care label instructions to avoid damage to your garments.

For best performance, load garments --_ in loose heaps evenly around the

washplate. Try mixing different sized garments to reduce tangling, j

IMPORTANT: Garments need to move freely for best cleaning and to reduce wrinkling and tangling.

Using Laundry Product Dispensers

NOTE: Do not add single-dose laundry packets, color-safe

bleach, Oxi-type boosters, or fabric softener crystals to

dispensers. They will not dispense correctly.

Add HE detergent

Detergent tray

Add a measured amount of HE detergent into detergent tray. This

tray holds 3 oz. (89 mL). Do not overfill tray - adding too much detergent may cause detergent to be dispensed into the washer too early.

IMPORTANT: Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency." Low-water

washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer

cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew.

HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer's

instructions to determine the amount of detergent to use. HELPFUL TIP: See "Washer Maintenance" for information on recommended method of cleaning washer dispenser trays.

, Add liquid fabric softener

to dispenser

Fabric softener tray

Pour a measured amount of liquid fabric softener into tray; always follow manufacturer's

directions for correct amount of fabric softener based on your load size. Close dispenser

drawer, then select Fabric Softener option. Fabric Softener is added during rinse.

IMPORTANT: Fabric Softener option must be selected to ensure proper distribution at correct time in cycle. Do not overfill or dilute. Overfilling dispenser will cause fabric softener to immediately dispense into washer.

If Extra Rinse option is selected, fabric softener will be dispensed into the last rinse.

It is normal for a small amount of water to remain inthe dispenser at the end of a cycle.

fabric softener

fT. Select cycle

bulky/ normal sheets _--_ wrinkle control

to dispenser

Do not overfill, dilute, or use more than 1 cup (250 mL). Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach.

deep water wash t _hand wash

cold wash

Turn cycle knob to choose your wash cycle.

8= Select SOIL LEVEL

1 O, Select cycle options, if desired

medium heavy

iiiiiiiiiiii_ii_iiiiii_iiiiiiiiii

soil level

Once you select a cycle, select the desire soil level by turning the Soil Level knob to the desired setting.

9, Select wash temperature

cool

wash temp

off on off on

i!iiiiiiiii_,,,,iii!]_il

extra rinse fabric softener

If you would like to add an Extra Rinse and/or Fabric Softener option, turn the knob for that feature to ON.

fl - 1, Press START/Pause/Unlock

to begin wash cycle

(_ start

°ck

to cancel

Once you select a cycle, select the desire wash temperature by turning the Wash Temp knob to the desired setting.

Always read and follow fabric care label instructions to avoid damage to your garments.

Not

Some cold water is added to save energy. This will be cooler than

your hot water heater setting.

Warm Some cold water will be added, so Bright colors

this will be cooler than what your ;_ Moderate to light soils previous washer provided.

Cool

Warm water is added to assist in soil removal and to help dissolve

detergents. Cold

Warm water may be added to Dark colors that assist in soil removal and to help bleed or fade dissolve detergents.

Tap Cold This is the temperature from your Dark colors that

faucet, bleed or fade

Whites and pastels Durable garments Heavy soils

Colors that bleed or fade

Light soils

Press the START/Pause/Unlock button to start the wash cycle. When the cycle has finished, the DONE indicator will

light. Promptly remove garments after cycle has completed to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps.

Unlocking the lid to add garments If you need to open the lid to add 1 or 2 missed garments:

Press START/Pause/Unlock; the lid will unlock once the washer movement has stopped. This may take several

minutes if the load was spinning at high speed. Then close lid and press START/Pause/Unlock again to restart the cycle.

If lid is left open for more than 10 minutes the water will pump out automatically.

WASHER MAMNTENANCE

WATER iNLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses

if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

NOTE: This washer does not include inlet hoses. See the "Installation Instructions" for more information.

WASHER CARE

Recommendations to Help Keep Your Washer Clean and Performing at its Best

1. Always use High Efficiency (HE) detergents and follow the HE detergent manufacturer's instructions regarding the

amount of HE detergent to use. Never use more than the recommended amount because that may increase the

rate at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor.

2. Use warm and hot wash water settings sometimes (not exclusively cold water washes), because they do a better

job of controlling the rate at which soils and detergent accumulate.

3. Always leave the washer lid open between uses to help dry out the washer and prevent the buildup of odor-

causing residue.

Cleaning Your Top Loading Washer Read these instructions completely before beginning the

routine cleaning processes recommended below. This Washer Maintenance Procedure should be performed,

at a minimum, once per month or every 30 wash cycles, whichever occurs sooner, to control the rate at which soils

and detergent may otherwise accumulate in your washer. Cleaning the inside of the Washer

To keep your washer odor-free, follow the usage instructions provided above, and use this recommended monthly

cleaning procedure: Clean Washer Cycle

This washer has a special cycle that uses higher water volumes in combination with affresh ®Washer Cleaner

or liquid chlorine bleach to clean the inside of the washer. Begin procedure

1. affresh ®Washer Cleaner Cycle Procedure {Recommended for Best Performance):

a. Open the washer lid and remove any clothing or items. bo Place an affresh ®Washer Cleaner tablet in the bottom

of the washer basket.

co Do not place an affresh ®Washer Cleaner tablet

in the detergent dispenser.

d. Do not add any detergent or other chemical to the

washer when following this procedure.

eo Close the washer lid. fo Select the CLEAN WASHER cycle.

g. Press the START/Pause/Unlock button to begin the

cycle. The Clean Washer Cycle Operation is described below.

NOTE: For best results, do not interrupt cycle. If cycle must be interrupted, press POWER/CANCEL. (For models

with no Power/Cancel button, press and hold START/ Pause/Unlock for three seconds). After the Clean Washer

cycle has stopped, run a RINSE & SPIN cycle to rinse cleaner from washer.

f WASHER CARE (cont.)

2. Chlorine Bleach Procedure {Alternative): ao Open the washer lid and remove any clothing

or items.

bo Add 1 cup (236 mL) of liquid chlorine bleach

to the bleach compartment.

NOTE: Use of more liquid chlorine bleach than is recommended above could cause washer damage

over time. co Close the washer lid.

d. Do not add any detergent or other chemical

to the washer when following this procedure. eo Select the CLEAN WASHER cycle. f. Press the START/Pause/Unlock button to begin the

cycle. The Clean Washer Cycle Operation is described

below. NOTE: For best results, do not interrupt cycle. If cycle

must be interrupted, press POWER/CANCEL. (For models with no Power/Cancel button, press and hold START/

Pause/Unlock for three seconds). After the Clean Washer cycle has stopped, run a RINSE & SPIN cycle to rinse

cleaner from washer.

Description of Clean Washer Cycle Operation:

1. This cycle will fill to a water level higher than in normal wash cycles to provide rinsing at a level above the water

line for normal wash cycle.

2. During this cycle, there will be some agitation and spinning to increase the removal of soils.

After this cycle is complete, leave the lid open to allow for better ventilation and drying of the washer interior.

Cleaning the Dispensers After a period of using your washer, you may find some

residue buildup in the washer's dispensers. To remove residue from the dispensers, wipe them with a damp cloth

and towel dry. Do not attempt to remove the dispensers or trim for cleaning. The dispensers and trim are not removable.

If your model has a dispenser drawer, however, remove the drawer and clean it before or after you run the Clean Washer

cycle. Use an all-purpose surface cleaner, if needed. Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe away any spills. Use only mild soaps or cleaners when cleaning external

washer surfaces. iMPORTANT: To avoid damaging the washer's finish, do not

use abrasive products.

NON=USE AND VACATION CARE

RE! NSTALLING/USI NG WASHER AGAI N

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer, to avoid flooding due to water pressure surge.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.

To winterize washer:

1. Shut off both water faucets; disconnect and drain water inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to

mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water inlet hoses.

2. If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and drain any remaining water into a pan or bucket. Disconnect drain

hose from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Drape power cord over edge and into washer basket.

7. Place packing tray from original shipping materials back inside washer. If you do not have packing tray, place heaw blankets or towels into basket opening. Close lid and place tape over lid and down front of washer. Keep lid taped until washer is placed in new

location.

To reinstall washer after non-use, vacation, winter storage, or moving:

Refer to "Installation Instructions" to locate, level, and connect washer.

Before using again, run washer through the following recommended procedure:

use washer again:

Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through BULKY/SHEETS cycle to clean washer and remove antifreeze, if used. Use only HE High Efficiency detergent. Use 1/2 the manufacturer's

recommended amount for a medium-size load.

+ 25 hidden pages