Maytag MVWC7ESWW0, MVWC6ESWW1, MVWC6ESWW0 Owner’s Manual
WASHER USER INSTRUCTIONS
INSTRUCTIONS D'UTILISATION DE LA LAVEUSE
Table of Contents / Table desmati6res
ASSISTANCE OR SERVICE ......................................................... 1
WASHER SAFETY ....................................................................... 2
WASHER USE ............................................................................. 3
WASHER CARE .......................................................................... 4
TROUBLESHOOTING ............................................................... 5
WARRANTY ............................................................................... 8
Para obtener acceso al manual de uso y cuidado en espaffol, o para obtener informaci6n adicional acerca de su producto, visite:
www.maytag.com.
Tenga listo su mimero de modelo completo. Podr,_ encontrar el mimero de modelo y de serie en la etiqueta ubicada debajo de la tapa de la
lavadora.
Asss:a ;: ewce
If you need assistance or service, first see the "Troubleshooting"
section. Additional help is available by calling our Maytag Services,
I I_C, at 1-800-688-9900 from anywhere in the U.S.A., visiting our
website at www.maytag.com or write:
Maytag Services, LLC
Attn: CAIR _':_Center
P.O. Box 2370
Cleveland, TN 37320-2370
In Canada, for assistance, installation and service, call
1-800-807-6777, visit our website at www.maytag.ca or write:
Whirlpool Canada LP
Customer Interaction Centre
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
ASSISTANCE OU SERVICE ........................................................ 9
SI_CURITI_ DE LA LAVEUSE .................................................... 10
UTILISATION DE LA LAVEUSE ............................................... 11
ENTRETIEN DE LA LAVEUSE ................................................... 12
DI_PANNAGE .......................................................................... 13
GARANTIE ............................................................................... 16
Keep this book and your sales slip together for future reference.
You must provide proof of purchase or installation date for in-
warranty service.
Write down the following information about your appliance to help
you obtain assistance or service if you ever need it. You will need to
know your complete model number and serial number. You can find
this information on the model and serial number label, located
under the washer lid.
Dealer name
Serial number
Address
Phone number
Model number
Purchase date
Enhance your washer with these premium accessories.
For more high-quality items or to order; call 1-800-901-2042, or visit us at www.maytag.com/accessories.
In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.
Part Number Accessory Part Number Accessory
8212656RP 10 ft (3.0 m)Inlet hose, Black EPDM (2 pack) 8212641RP 5 ft (1.5 m)Inlet hose, Black
EPDM (2 pack)
8212638RP 6 ft (1.8 m) Nylon braided inlet hose, space-saving 8212546RP 4 ft (1.2 m) Inlet hose, Black
90 ° elbow, hypro-b[ue steel couplings. (2-pack) EPDM (2 pack)
8212487RP 5 ft (1.5 m) Nylon braided inlet hose. (2-pack) 8212526 Washer drip tray, fits under all
W10092798B
W10092799B - SP
Part Number Accessory Part Number Accessory
8212637RP 6 ft (1.8 m) Inlet hose, Black EPI)M, space-saving 31682 All purpose appliance cleaner
90° elbow, hypro-b[ue steel couplings. (2-pack)
8212545RP 5 ft (1.5 m) Inlet hose, Red and Blue EPDM. 1903WH I_aundry supply storage cart
(2-pack)
This washer does not include inlet water hoses.
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediatel_
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS iS
EXPLOSIVE. if the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE INSTRUCTIONS
[] Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
I Before the washer is removed from service or discarded,
remove the door or lid.
mDo not reach into the washer if the drum, tub or agitator is
moving.
I Do not install or store the washer where it will be exposed to
the weather.
mDo not tamper with controls.
mDo not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
mSee "Electrical Requirements" for grounding instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
WASHER USE
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Electrical Shock Hazard
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating
this appliance.
1,
Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach.
2.
Drop a sorted load of clothes loosely into your washer.
• I_oad evenly to maintain washer balance. Mix large and
small items. Items should move easily through the wash
water.
• I.oad only to the top of the basket as shown. Overloading
can cause poor cleaning.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3,
(OPTIONAl_) Add liquid chlorine bleach.
NOTE: Follow the garment and the chlorine bleach
manufacturers' directions for proper use. Undiluted bleach will
damage any fabric it touches. The damage appears as rips, holes,
tears, or color loss and may not show up until several washings
later. To avoid spilling, use a cup with a pouring spout. [)o not
let bleach splash, drip, or run down into the washer basket.
Always measure liquid chlorine bleach. [)o not guess. [)o not
use more than the manufacturer's recommendedamount for a
full load. Use less with a smaller load size.
Styles1 and 2: With liquid chlorine bleach dispenser (on some
models)
Use only liquid chlorine bleach in this dispenser. Do not use
this dispenser to add powdered chlorine or color-safe bleach
to your wash load. Pour measured liquid chlorine bleach
into the liquid chlorine bleach dispenser. Bleach is
immediately fed into the washer and is diluted automatically
during the wash part of the cycle.
I)ispensers on Timed Bleach models automatically dispense
bleach at the proper time in the cycle for optimal
performance, ensuring the cleanest and brightest loads•
Style 1
liquid chlorine
bleach dispenser
(on some models)
Style 2
Dispenser for
77med Bleach models
7°
Select a Wash Temperature based on the type of fabric and soil
being washed. Use the warmest wash water safe for the fabric.
Follow garment label instructions.
The Automatic Temperature Control (ATC) (on some models)
electronically senses and maintains a uniform water temperature
by regulating incoming hot and cold water.
• Even in Cool wash, some warm water is let into the washer
to maintain a minimum temperature of approximately 70°F
(21 °C).
Temperature Guide
Wash Temp Suggested Fabrics
Hot Whites and pastels
Durable garments
Heavy soils
Style 3: Without liquid chlorine bleach dispenser (on some
models)
• I.et the washer fill and begin agitating the load.
• Add bleach 5 minutes into the wash cycle for best cleaning
and so that bleach can be removed in the rinse cycle. Pour
bleach around the agitatob not directly onto the load to
avoid damaging clothing or other items in the load.
4,
(OPTIONAl.) Add liquid fabric softener.
NOTE: I)o not spill or drip any fabric softener onto the clothes.
Undiluted fabric softener can stain fabrics. Always dilute fabric
softener with warm water. Using too much fabric softener can
make some items (diapers and towels) nonabsorbent. If this
aaPpens, do not use it in every load, or use less of it in each
Style 1 : With liquid fabric softener dispenser (on some models)
• Use only liquid fabric softener in this dispenser. Pour
measured liquid fabric softener into the dispenser. Softener
is added automatically during the rinse portion of the cycle.
Dilute liquid fabric softener by filling the dispenser with
warm water until liquid reaches the underside of the
dispenser rim. See max fill line arrows.
NOTE: If your washer has a Fabric Softener Switch (on some
models), turn the switch to ON when using fabric softener.
Style 2: Without liquid fabric softener dispenser (on some
models)
• In the final rinse only, add fabric softener that has been
diluted with 1/2to 1 cup (125 to 250 ml_) warm water.
5°
Close the washer lid. Washer will not agitate or spin with the
lid open.
6.
Turn the WATER I_EVEI_selector to the correct setting for your
wash load size and the type of fabric being washed. You may
change the water level selection after the washer starts filling
by turning the selector to a different setting.
• You may change the load size or water level selection after
the washer has started filling by turning the selector to a
different setting.
NOTE: Your washer may be equipped with an Auto I_oad sensing
water level feature that will automatically sense the size of the
load and add enough water to efficiently clean it. To ensure the
washer determines the proper water level, do not open the lid or
stop the washer anytime during or after the fill. Water may not
cover the top level of the clothes. This is normal for Auto I.oad
Sensing washers. For these models, the water fill is optimized by
the system for best wash performance.
Warm Bright colors
Moderate to light soils
Cool Colors that bleed or fade
I.ight soils
Cold Dark colors that bleed or fade
I_ight soils
NOTE: In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils can be difficult to remove.
Some fabrics can retain wear wrinkles and have increased pilling
(the formation of small lint-like balls on the surface of garments).
8. Extra Rinse is available on some models. Selecting this option
provides a second rinse. An Extra Rinse can be added to any
wash cycle.
9. The SOIl_ I_EVEI_selector is available on some models and may
be used to shorten or lengthen the wash cycle depending on the
type of fabric and the degree of soiling.
10. Push in the Timer knob and turn it clockwise to the wash cycle
you want. Pull out the Timer knob to start the washer.
To stop or restart your washer:
• To stop the washer at any time, push in the Timer knob.
• To restart the washer, dose the lid (if open) and pull out the
Timer knob.
WASHER CARE
Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach from the outside of your washen
Clean your washer interior by mixing 1 cup (250 ml_) of chlorine
bleach and enough detergent to equal twice the manufacturer's
recommended amount for a normal wash load. Pour this mixture
into your washer and run it through a complete cycle using hot
water. Repeat this process if necessary.
Remove any hard water deposits using only cleaners labeled as
washer safe.
Cleaning the liquid fabric softener dispenser (on some models):
1. Remove dispenser by grasping top with both hands and
squeezing, while pushing upward with thumbs.
4
2. Rinse dispenser under warm water, then replace it.
NOTE: Some models are equipped with a liquid fabric softener
dispenser. To avoid damage to the washer or clothing, do not
wash clothes with the liquid fabric softener dispenser removed
or add detergent or bleach to this dispenser; it is for liquid fabric
softener only.
V:k)]/"" F '
This washer does not include water inlet hoses. A list of hoses
available for purchase from Maytag is provided on the first page
of this user instructions.
Replace water inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace water inlet hoses if
bulges, kinks, cuts, weab or leaks are found.
When replacing your water inlet hoses, mark the date of
replacement on the [abe[ with a permanent marker.
To use washer again
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Because some water may stay in the hoses, freezing can damage
your washer. If storing or moving your washer during freezing
weatheb winterize it.
Winterizing your washer
1. Shut off both water faucets. Disconnect and drain water inlet
hoses. Pour 1 qt (1 I.) of R.V.-type antifreeze into the basket.
2. Run washer on a drain and spin setting for about 30 seconds to
mix the antifreeze and remaining water.
3. Unplug washer or disconnect power.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call
In U.S.A. www.maytag.com/help In Canada www.maytag.ca
i I= 3
Noisy
Is the load balanced and the washer level? The wash load
should be balanced and not overloaded. The washer must be
[eve[. The front feet should be properly installed and the nuts
tightened. Reset the rear leveling legs (if needed).
See "Starting Your Washer."
Did you completely remove the yellow shipping strap with
shipping pins? See "Remove Shipping Materials."
Are the gears engaging after the drain and before spin, or is the
upper part of agitator clicking during wash? These are normal
washer noises.
Leaking
Check the following:
Are the fill hoses tight?
Are the fill hose washers properly seated?
Is the sink or drain clogged? Sink and standpipe must be able
to handle 17 gal. (64 I.) of water per minute.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
3. Run the washer through a complete cycle with 1 cup (250 ml.) of
detergent to clean out antifreeze.
Storage, non-use, or vacation care
Operate your washer only when you are at home. If you will be on
vacation or not using your washer for an extended period of time,
you should:
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer. This helps avoid flooding
(due to a water pressure surge) while you are away.
Is water deflecting off the tub ring or the load? Center the tub
before starting the washer. The wash load should be balanced
and not overloaded. The fill or spray rinses can deflect off the
load. The washer must be [eve[. The front feet should be properly
installed and the nuts tightened. Reset the rear leveling legs
(if needed). See "l_eve[ the Washer."
• Check household plumbing for leaks.
Basket crooked
Was the washer basket pulled forward during loading? Push
the basket to the center before starting wash.
Is the load balanced and the washer level? The wash load
should be balanced and not overloaded. The washer must be
[eve[. The front feet should be properly installed and the nuts
tightened. Reset the rear leveling legs (if needed). See "l.eve[
the Washer."
• The washer basket moves while washing. This is normal.
Agitator operation
• The top of the agitator is loose, or moves in only one direction.
This is normal.
Loading...