Maytag MVW6200KW Dimensions Guide
White Available MVW6200KW
Dimension Guide
Maytag® Top Load Washer with
Deep Fill option - 4.8 cu. ft.
42"
Height
27 1∕2"
Depth
27 ½"
Width
W11416397A
DETAILED PLANNING DIMENSIONS
WARNING: To reduce the risk of re, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and
INSTALLATION INSTRUCTIONS, located in your appliance's Owner's Manual, before installing and operating this appliance.
Electrical Requirements
MVW6200KW
4.8 cu. ft. DOE (US) 5.5 cu. ft. IEC (CAN)
Minimum Circuit
Amperage Rating
Maximum AMP Draw 6.0 A
Operating Voltage 120 V AC only
Operating Frequency 60 Hz
E
A
C
15 A
D
B
Product Dimensions
MVW6200KW 4.8 cu. ft. DOE (US) 5.5 cu. ft. IEC (CAN)
in (min) mm (min) in (max) mm (max)
A Height (with feet) 42 1064.7 42 11∕
B Width 27 ½ 701.8 - C Top of Lid Height (with feet) 38 968.1 38 3∕
D Depth 27 1∕
E Width of Lid 27 1∕
2
2
701.8 - -
701.8 - -
2
16
4
1083.7
983.6
DETAILED PLANNING DIMENSIONS
J
I
F
G
L
M
Product Dimensions
MVW6200KW 4.8 cu. ft. DOE (US) 5.5 cu. ft. IEC (CAN)
in (min) mm (min) in (max) mm (max)
F Height of Lid 19 1∕
G Height with Lid Open 57 ½ 1454.6 58 3∕
H Water Inlet Valves Height 38 1∕
I Water Inlet Valves from Side 5 ¾ 146.8 - J Power Cord from Side 9 ½ 241.7 - K Power Cord Height 37 1∕
Power Cord Length 62 1574.8 - -
L Drain Hose Outlet Height 19 1∕
M Drain Hose Outlet from Side 3 3∕
Drain Hose Length 42 1066.8 - -
Diameter of Drain Hose 1 25.4 - -
2
4
2
4
4
486.5 - -
4
1470.1
971.5 40 1016
952.5 38 1∕
4
971.5
489 20 508
71.3 - -
H
K
3
DETAILED PLANNING DIMENSIONS
Recessed area or closet installation
3"
(76 mm)
14" max.
(356 mm)
5"
(126 mm)
1"
(25 mm)
19"/22"
(482/559
mm)
1"
(25 mm)
3"
(76 mm)
2
48 in.
(310 cm2)
2
24 in.
(155 cm2)
NOTE: All 27" wide washers should have 19" clearance, while all 29" wide washers should have 22" clearance.
All Dimensions show recommended spacing allowed, except for closet door ventilation openings, which are minimum required.
This washer has been tested for installation with spacing of 0" (0 mm) clearance on the sides. Consider allowing more space for ease
of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and oor moldings. Add spacing
of 1" (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings
in door are required.
4
Loading...