www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
Slide-In Electric Ranges: MES5570AAW,
MES5570AAB, MES5770AAW, MES5770AAQ,
MES5770AAB, MES5770AAA, MES5870AAW,
MES5870AAQ, MES5870AAW and MES5870AAA
• Dimensions (Actual Size) •
Width of top frame:
Width of case: 30"
Height:
Door swing:
Height at full leg adjustment:
Height at 0" leg adjustment:
• Additional Information •
• Units depth including door handle is 28 3/8".
• Electrical requirements: 120/240 VAC or 120/208
VAC, 60Hz. 50 amp grounded individual circuit
protection is recommended, 40 amp minimum required.
• Proper operation requires use of range hood.
• Cabinetry over cooktop : 30' minimum clearance
between the top of the cooking surface and the bottom
of an unprotected wood or metal cabinet. 24" minimum
when bottom of wood or metal cabinet is protected by
not less than 1/4" flame retardant millboard covered
with not less than no. 28 MSG sheet steel, 0.015"
stainless steel, 0.024" aluminum or copper.
• To eliminate the hazard of reaching over heated
surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage
is to be provided, the hazard can be reduced by
installing a range hood that projects horizontally a
minimum of 5" beyond the bottom of the cabinets.
• Range complies with U.L. requirements for 0"
clearance from the range to adjacent vertical side walls
and 0" from rear wall.
• Island or peninsula installations with 24" deep base
cabinets must use flush back (no rear toe space)
cabinets to avoid range interference,. If rear toe space
is desired, use 27" or deeper cabinets.
• Some European style cabinets are equipped with
vinyl drawer and door fronts. The vinyl may not be
designed to withstand the heat produced by the normal
operation of the self cleaning range. Discoloration or
delamination may occur. To avoid possible damage,
Maytag recommends increasing the 30" cabinet
opening to 30 1/4" minimum and using a heat shield kit
#CABKIT V. The countertop cutout must remain 30".
See page 2 for additional information
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
Depth:
30 3/4"
36 7/16"
26 5/16"
36 7/16"
20"
38"
36"
Wall View
(not to scale)
(not to scale)
Countertop
392
30 3/4"
Locate electrical
supply junction
box or 60" of
electrical cable
within shaded
area.
5 1/2" 19"
10"
Wall View
18"
36"
height
30"
30" Min.
Range
26 5/16"
(not to scale)
30"
20"
Upper cabinets
can only be 13"
deep maximum.
Over range
cabinet is NOT
recommended.
Side clearance
from cooktop to
18" above the
cooktop is 3" on
each side (see
solid arera)
30" Minimum
cutout width
BN260 • A392B149 • • 032603 • 95655 • 86075
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
Additional Information:
Kits:
• K70FILL : Filler kit for cutouts greater than 23 1/2",
Page 2
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
Slide-In Electric Ranges: MES5570AAW,
MES5570AAB, MES5770AAW, MES5770AAQ,
MES5770AAB, MES5770AAA, MES5870AAW,
MES5870AAQ, MES5870AAW and MES5870AAA
With this dimension, filler strip or optional
backguard is not used. For cutouts greater
than 23 1/2", use filler kit K70FILL.
36"
countertop height
You may need to
shave or cut the trim of
formed or metal front
edged countertops to
clear the 30 3/4" width
of cooktop.
Cutout opening
Slide-in instalation
(not to scale)
23 1/4"
Recommended.
From countertop
front to rear cutout
30"
Cabinet opening
30" countertop
opening
23 5/8"
minimum
flat area
25" Normal
countertop depth
24"
Cabinet depth
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
BN260 • A392B149 • • 032603 • 95655 • 86075
149