Maytag MER6549BAW, MER6549BAQ Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Upper Door open
Lower door swing:
Maytag
• Product Model Number (s): •
Free Standing Electric Ranges:
MER6549BAW and MER6549BAQ
• Dimensions (Actual Size) •
Height of cooking surface: 35 7/8"
Height overall:
Case width:
Depth NOT including handle:
Upper door swing:
Height at 0" leg adjustment:
• Additional Information •
• Can be installed with the back against (0") a vertical
combustible wall, and the sides below the cooktop surface against (0") combustible base cabinets.
• Electrical requirements: 120/240 VAC or 120/208
VAC, 60Hz. 50 amp grounded circuit protection is recommended.
• Cabinetry over cooktop : 30' minimum clearance
between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet. 24" minimum when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or copper.
• To eliminate the risk of burns or fire by reaching over
heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets.
• For Free-standing installations the cutout opening
width is 30" ± 1/16" minimum. The height of the countertop is 36" and countertop depth is 25".
46 3/4" 29 7/8" 26 1/8" 21" 10 3/8" N/AHeight at full leg adjustment: N/A
29 7/8"
46 3/4"
35 7/8"
26 1/8"
Wall View
(not to scale)
7"
5 3/4"
Wall View
(not to scale)
Lower Door open
Locate electrical supply junction box or 60" of electrical cable within shaded area.
(not to scale)
10"6" 6"
Upper cabinets can only be 13" deep maximum. Over range cabinet is NOT recommended.
30" Min.
Side clearance from cooktop to 18" above the cooktop is 3" on each side (see
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or outdated data sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall not exceed $50.00. Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 • notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory • it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am • Sheets for each project, as opposed to the problems, time, costs, and risks associated with reusing old Data Sheets.
461
Countertop
height
Range
solid arera)
30" Minimum cutout width
BN • A461 • • 032603 • 95657 • 72503
Loading...