Maytag MEC4436AAW10, MEC4436AAC10, MEC4436AAB10, MEC4430ACW14, MEC4430AAW14 Owner’s Manual

Electric

Coil

Elements

Drip Bowls

Care & Cleal

Cleaning Procedures

Troubleshooting ........................... 6

Warranty & Service ...................... 7

Guide d'utilisation et

d'entretien ..................................... 8

Guia de Uso y Cuidado ............. 16

Form No. A/01/08 Part No. 8111 P521=60 ,_)2006 Maylag Appliances Sales Co. Litho U.S.A.

ImportentSefety
Instrmions

Read and follow all instructions before using this
appliance to prevent the potential risk of fire, electric
shock, personal injury or damage to the appliance as a
result of improper usage of the appliance. Use appliance
only for its intended purpose as described in this guide.

To ensure proper and safe operation: Appliance must
be properly installed and grounded by a qualified techni-
cian. Do not attempt to adjust, repair, service, or replace
any part of your appliance unless it is specifically recom-
mended in this guide. All other servicing should be
referred to a qualified servicer.

Always disconnect power to appliance before servicing.

To Prevent Fire or Smoke

Damage

Be sure all packing materials are removed from the
appliance before operating it.

Keep area around appliance clear and free from combus-
tible materials.

Many plastics are vulnerable to heat. Keep plastics away

from parts of the appliance that may become warm or
hot.

To prevent grease fires, do not let cooking grease or

other flammable materials accumulate in or near the
appliance.

Warning and Important Safety Instructions appearing in
this guide are not meant to cover all possible conditions

and situations that may occur. Common sense, caution,
and care must be exercised when installing, maintaining,
or operating the appliance.

Always contact your dealer, distributor, service agent, or
manufacturer about problems or conditions you do not
understand.

Recognize Safety Symbols, Words, Labels

in Case of Fire

Use dry chemical or foam-type extinguisher or baking
soda to smother fire or flame. Never use water on a

grease fire.

1. Turn off appliance to avoid spreading the flame.

2. NEVER pick up or move a flaming pan.

Child Safety

NEVER leave children alone or unsupervised near the

appliance when it is in use or is still hot. Children should
never be allowed to sit or stand on any part of the
appliance as they could be injured or burned.

Childrenmustbetaughtthattheapplianceandutensils
in itcanbehot.Lethotutensilscoolinasafeplace,out
ofreachofsmallchildren.Childrenshouldbetaughtthat
anapplianceisnotatoy.Childrenshouldnotbeallowed
toplaywithcontrolsor otherpartsoftheappliance.

About Your Appliance

If appliance is installed near a window, proper precau-
tions should be taken to prevent curtains from blowing

over surface elements.
To prevent potential hazard to the user and damage to

the appliance, do not use appliance as a space heater to
heat or warm a room.

Wear proper apparel. Loose fitting or long hanging-
sleeved apparel should not be worn while cooking.
Clothing may ignite and cause burns if garment comes in
contact with heating elements.

NEVER heat unopened containers on the surface unit.

Pressure building up in the container may cause the
container to burst resulting in burns, injury or damage
to the appliance.

PREPARED FOOD WARNING: Follow food
manufacturer's instructions. If a plastic frozen food

container and/or its cover distorts, warps, or is otherwise
damaged during cooking, immediately discard the food

and its container. The food could be contaminated.

To ensure proper operation and to avoid damage to the
appliance or injury, do not adjust, service, repair or
replace any part of the appliance unless specifically
recommended in this guide. Refer all other servicing to
a qualified technician.

NEVER store or use gasoline or other combustible or
flammable materials near surface units or in the vicinity
of this appliance as fumes could create a fire hazard or
an explosion.

To prevent grease fires, do not let cooking grease or
other flammable materials accumulate in or near the

appliance.
Many aerosol-type cans are EXPLOSIVE when exposed

to heat and may be highly flammable. Avoid their use or
storage near appliance.

DO NOT TOUCH HEATING ELEMENTS. Heating elements
may be hot even though they are dark in color. During

and after use, do not touch, or let clothing or other
flammable materials contact heating elements until they

have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns.

Cooking Safety

Use dry, sturdy potholders. Damp potholders may cause
burns from steam. Dish towels or other substitutes

should never be used as potholders because they can
trail across hot elements and ignite or get caught on
appliance parts.

Always turn off all controls when cooking is completed.

Utensil Safety

This appliance has been tested for safe performance
using conventional cookware. Do not use any devices or
accessories that are not specifically recommended in this
guide. The use of devices or accessories that are not
expressly recommended in this guide can create serious
safety hazards, result in performance problems, and
reduce the life of the components of the appliance.

If the pan is smaller than the element, a portion of the
element will be exposed to direct contact and could
ignite clothing or potholder.

Only certain types of glass, glass/ceramic, ceramic,
earthenware, or other glazed utensils are suitable for

cooktop service without breaking due to the sudden
change in temperature. Follow utensil manufacturer's

instructions when using glass.
Turn pan handle toward center of cooktop, not out into

the room or over another surface element. This reduces
the risk of burns, ignition of flammable materials, or
spillage if pan is accidently bumped or reached by small

children.

2

ImportantSafety

Cooktop

NEVER leave surface units unattended especially when
using high heat. An unattended boilover could cause
smoking and a greasy spillover can cause a fire.

This appliance is equipped with different size surface
elements. Select pans with flat bottoms large enough to
cover element. Fitting pan size to element will improve
cooking efficiency.

If the pan is smaller than the element, a portion of the
element will be exposed and could ignite clothing or
potholder.

CoU Elements

To prevent damage to removable heating elements, do
not immerse, soak or clean in a dishwasher or self-clean

oven. A damaged element could short resulting in a fire
or shock hazard.

Make sure drip bowls are in place as absence of these
bowls during cooking could damage wiring.

Protective Liners: Do not use aluminum foil to line
surface unit drip bowls, except as suggested in the

manual. Improper installation of these liners may result in
a risk of electric shock or fire.

Never stand on the cooktop.

Ventilating Hoods

Clean cooktop hood and filters frequently to prevent
grease or other flammable materials from accumulating
on hood or filter and to avoid grease fires.

When flaming foods under the hood, turn the fan on.

Cleaning Safety

Clean cooktop with caution. Turn off all controls and
wait for appliance parts to cool before touching or
cleaning. Clean with caution. Use care to avoid steam
burns if a wet sponge or cloth is used to wipe spills on a
hot surface. Some cleaners can produce noxious fumes if
applied to a hot surface.

Clean only parts listed in this guide.

important Safety Notice

and Warning

IMPORTANT NOTICE REGARDING PET BIRDS:
Never keep pet birds in the kitchen or in rooms where

the fumes from the kitchen could reach. Birds have a
very sensitive respiratory system. Fumes released during

an oven self-cleaning cycle may be harmful or fatal to
birds. Fumes released due to overheated cooking oil, fat,

margarine and overheated non-stick cookware may be
equally harmful.

Deep Fat Fryers

Use extreme caution when moving the grease pan or
disposing of hot grease. Allow grease to cool before
attempting to move pan.

Save These Instructions for Future Reference

3

SurfuceCooking

Surface Controls

Use to turn on the surface elements. An infinite choice of
heat settings isavailable from Low to High. The knobs can

be set on or between any of the settings.

Setting the Controls

1. Place pan on surface element.

2. Push in and turn the knob in either direction to the desired
heat setting.

* The cooktop surface is marked to identify which

element the knob controls.

.

There is an element indicatorlight on the control panel.
When any surface control knob isturned on, the light will
turn on. The light will turn off when all the surface ele-

ments are turned off.

4. After cooking, turn knob to OFF. Remove pan.

Suggested Heat Settings

The size,type of cookware and cooking operation will affect the
heat setting.

High: Use to bring liquid to
a boil. Always reduce

setting to a lower heat

when liquids begin to boil

or foods begin to cook.

H_o Medium: Use

Off

Low _ • • operations.

Low: Use to keep foods
warm and melt chocolate

and butter.

Meal. High: Use to brown
meat, heat oil for deep fat

frying or sauteing.
Maintain fast boil for

large amounts of liquids.

to maintain
slow boil for

of liquids and
for most frying

Med. Low:
Use to

continue
cooking

covered foods
or steam
foods.

Coil Element Surface

Notes:

', Clean cooktop after each use.
* Wipe acidic or sugary spills as soon as the cooktop

has cooled as these spills may discolor or etch the
porcelain.

To protect drip bowl finish:

To lessen discoloration and crazing, avoid using high
heat for long periods.

Do not use oversized cookware. Pans should not
extend more than 1-2 inchesbeyond the element.

When home canning or cooking with big pots, use the
Canning Element (:Model CE1). Call 1-877-232-6771

USA or 1-800-688-8408 Canada to order.

* Clean frequently. (:Seepage 5.)

Coil Elements

,, When an element ison, itwill cycle on and off to maintain the

heat setting.
Coil elements are self-cleaning. Do not immerse in water.

To remove: When cool, raise ele- _ /

ment. Carefully pull out and away _/__ /
from receptacle. __j___

To replace: Insertelementter- _ _-_

minals into receptacle. Guide the
element into place.Press down on

the outer edge of element until it
sits level on drip bowl.

TERMINALS

Drip Bowls

The drip bowls under each surface element catch boilovers and
must always be used. Absence of drip bowls during cooking may

damage wiring.
To prevent the risk of electric shock or fire, never line drip bowls

with aluminum foil.
Drip bowls will discolor (:blue/gold stains) or craze over time if

overheated. This discoloration or crazing ispermanent. This will
not affect cooking performance.

4

Cleaning Procedures

g

Cooktop =

Porcelain Enamel

Control Knobs

Drip Bowls =

Chrome

(select models)

Drip Bowls =
Porcelain

(select models)

Stainless Steel

(select models)

Porcelain enamel isglass fused on metal and may crack or chip with misuse. It isacid resistant, not acid
proof. All spillovers,especially acidic or sugary spillovers, should be wiped up immediatelywith a dry cloth.

When cool, wash with soapywater, rinse and dry.

Never wipe off a warm or hot surface with a damp cloth. This may cause cracking or chipping.
Never use oven cleaners, abrasive or caustic cleaning agents on exterior finish of cooktop.

Removeknobs in the OFFposition by pulling up.
Wash, rinse and dry. Do not use abrasive cleaning agents asthey may scratch the finish.
Turn on each element to be sure the knobs have been correctly replaced.

When cool, wash after each use,rinse and dry to prevent staining or discoloration.
To clean heavysoil, soak in hot sudsywater, then use a mild abrasive cleaner such asSoft Scrub* and a

plastic scouring pad. Do not use abrasive cleaning agents.

Porcelain may discolor or craze if overheated.This is normal and will not affect cooking performance.

When cool, wash after each use,rinse and dry to prevent staining or discoloration. May be washed in the

dishwasher.
To clean heavysoil, soak in hot sudsywater, then use a mild abrasive cleaner such asSoft Scrub* and a

plastic scouring pad.

Forburned on soil, remove from cooktop, place on newspapers and carefully spraywith commercial oven

cleaner. (Do not spray surrounding surfaces.)Place inplastic bag and allow to soak severalhours. Wearing

rubber gloves, remove from bag, wash, rinse and dry.

, DO NOT USEANY CLEANING PRODUCT CONTAINING CHLORINE BLEACH.
, DO NOT USEABRASIVE OR ORANGE CLEANERS.
, ALWAYS WIPE WITH THE GRAIN WHEN CLEANING.

, Daily Cleaning/Light Soil -- Wipe with one of the following - soapy water, white vinegar/water solution,

Formula 409 Glass and Surface Cleaner* or a similar glass cleaner - using a sponge or soft cloth. Rinse

and dry.To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray(Part No.

20000008)**.

, Moderate/Heavy Soil =- Wipe with one of the following -Bon Ami, Smart Cleanser,or Soft Scrub* -

usinga damp spongeor soft cloth. Rinseand dry.Stubborn soils may beremoved with adamp multi-purpose
Scotch-Brite* pad;rub evenlywith the grain. Rinseand dry.To restore luster and removestreaks,follow with
Stainless Steel Magic Spray*.

, Discoloration == Using a damp sponge or soft cloth, wipe with Cameo Stainless SteelCleaner*. Rinse

immediatelyand dry. To remove streaks and restore luster, follow with StainlessSteel Magic Spray*.

Brushed Chrome _ When cool, wash with warm soapy water, rinse and buff the surface.

(select models) _ Forheavier soil, use a mild abrasive cleaner such as baking soda or Bon Ami*, rubbing with the grain to

avoid streaking the surface. Rinseand buff.
To prevent scratching, do not useabrasive cleaners.
To restore luster and remove streaks, follow with StainlessSteelMagic Spray* (part #20000008)**. Chrome

will permanently discolor if soil is allowed to bake on.

* Brand names for cleaning products are registered trademarks of the respective manufacturers.
** To order direct, call 1-877-232-6771 USA or 1-800-688-8408 Canada.

5

Troubleshoodn9

For most concerns, try these first.

Part or all of appliance does not
work.

Check ifcontrols have been properly set.
Check or re-set circuit breaker. Check or replace fuse.

Check power supply.

Check ifsurface controls have been properly set. See page 4.
Check if coil element is properly installed or needs to be replaced. See page 4.

6

MAYTAG®MAJOR APPLIANCE WARRANTY

LIM ITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or
furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter "Maytag") will pay for factory
specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Maytag designated
service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used
in the country in which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of
original purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or
repair house fuses, or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty
coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is
contrary to published user or operator instructions and/or installation instructions.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by Maytag.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage
results from defects in materials or workmanship and is reported to Maytag within 30 days from the date of purchase.

6. Any food loss due to refrigerator or freezer product failures.

7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be
repaired in the home and only in-home service is covered by this warranty.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an
authorized Maytag servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance
with published installation instructions.

11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty
is void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. MAYTAG SHALL NOT BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE
TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Maytag dealer to determine if another warranty applies.
If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," you may find

additional help by checking the "Assistance or Service" section or by calling Maytag. In the U.S.A., call 1-800-688-9900. In Canada, call
1-800-807-6777.

9/07