Top-Load
Washer
WASHER SPECIFICATIONS
MODEL MAT12PD
MOTOR
Single-phase, reversible, thermoprotected •
HP (kw)
1
⁄2 (.37)
APPROXIMATE WATER USAGE — gal. (liters)
Factory preset hot cycle average, hot water 6.5 (24.6)
Factory preset average, overall 31.5 (119.2)*
Adjustable setting 29 (109.8)
ELECTRICAL RATING 120V, 60 Hz
Export model 220 – 240V, 50 Hz
FUSE REQUIREMENT
Domestic model — amps 15
Export model — amps 10
CYLINDER
Volume — cu. ft. (liters) 2.5 (70.8)
Diameter — in. (cm) 20
1
/
2
(52.1)
Depth — in. (cm) 15 (38.1)
DOOR OPENING
In. (cm) 16 (40.6)
EXTRACT SPEED
Maximum rpm 618
Maximum g-force 110
OPERATING PRESSURE
Psi (bar) 15 – 120 (1 – 8)
INLET HOSE LENGTH
Ft. (m) 4 (1.22)
DRAIN HOSE LENGTH
Ft. (m) 4 (1.22)
ADJUSTABLE LEVELING LEGS •
COLORS
White •
Bisque •
APPROXIMATE WEIGHT — lbs. (kg)
Crated 224 (102)
Uncrated 198 (90)
*Average based on testing with a 14-pound AHAM load.
Flush-to-wall installation is permitted by a 1
1
⁄4" (3.2 cm) back panel overhang.
See specific instructions for proper installation. Because of continuous product improvement, Maytag reserves the right to change
specifications without notice
.
♦
This limited-time Maytag®Extra-Protection 5-Year Warranty offer is available through December 31, 2004.
5 YEARS
♦
— ALL PARTS
For a period from the date of original purchase
through the time listed above, the designated parts
that fail in normal commercial use will be repaired
or replaced free of charge for the part itself, with
the owner paying all other costs, including labor,
transportation and customs duty. Chemical
damage is excluded from all warranty coverage.
See complete warranty for details.