Maxon M-KIT100, M-KIT102, M-KIT101 Instructions Manual

Document Number: 181-03001

®

Revision Date: November 2008

Maxon Furniture Inc.
An operang company of the HNI Corporaon
www.maxonfurniture.com
Customer Service 1-800-876-4274

M-KIT100/101/102

Assembly Instructions

These instrucons must be followed exactly. Failure to
follow these instrucons could damage the product or
result in injury to persons using or assembling the product.
Maxon Furniture Inc. shall not be liable for any costs, loss,
damage, expenses or injuries resulng from failure to
properly assemble the product in accordance with these
instrucons.

Maxon Furniture Inc. Customer Service: 1-800-876-4274

Quanty Part Number Descripon

4 PLNR4236 Non-Raceway Panel, 42H x 36W

2 PLNRCP42 Corner Post Kit, 42” High
2 LCCT123636TM Corner Countertop, 12D x 36W x 36W
1 UWR2472TM Rectangular Worksurface, 24D x 72W

*

The Worksurface carton contains two RH and one LH Canlevers screwed to the worksurface.

LCCT123636TM

*

UWR2472TM

PLNRCP42

PLNRCP42

PLNR4236

PLNR4236

For installaon assistance or to report missing parts, please contact Customer Service at 1-800-876-4274

These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons using or
assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from failure to properly
assemble the product in accordance with these instrucons.

Page 2 of 10 M-KIT100/101/102 Assembly Instrucons 181-03001

Maxon Furniture Inc. Customer Service: 1-800-876-4274

Tools Required for Assembly

Phillips Screwdriver

Boxcuer

Drill/Screw Gun
with Phillips bit

1/2” Box End or

Adjustable Wrench

Wire Cuers

Level

Tape Measure

Rubber Mallet

Hardware Kits

Please ensure all required pieces are present before beginning assembly. Some steps may require a second
person for assistance.

Panel Hardware (PLNR4236)

End Cap

Provided: 4

Used: 2

Lock Bar

Provided: 4

Used: 1

Top Cap Spacer

Provided: 4

Used: 2

I-Beam Panel Connector

Provided: 24

Used: 24

Straight Alignment Bracket

Provided: 4

Used: 1

#8 x 1/2" Phillips Flat Head

Provided: 8

Used: 2

Rectangular Worksurface Hardware (UWR2472TM)

RH Corner Bracket

Provided: 1

Used: 0

These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons using or
assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from failure to properly
assemble the product in accordance with these instrucons.

Page 3 of 10 M-KIT100/101/102 Assembly Instrucons 181-03001

Provided: 1

Used: 0

LH Corner Bracket

Provided: 1

Used: 0

#10 x 3/4" Pan Head Screw

Provided: 16

Used: 9