M-Audio OXYGEN 8, OXY8-050503 User Manual

User Guide

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Oxygen 8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Oxygen 8 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Guide to Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

USB Driver Installation for Windows . . . . . . . . . . . . . . . . . . . . . . .4

USB Driver Installation for Macintosh . . . . . . . . . . . . . . . . . . . . .10

First Time OMS Configuration Instructions . . . . . . . . . . . . . . . . .12

Setting Up Your MIDI Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Using the Oxygen 8 in your Application Software . . . . . . . . . . . . . . .14

Oxygen 8 MIDI Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MIDI Functions In Standalone Mode . . . . . . . . . . . . . . . . . . . . . . . . . .14

Default Settings of The Oxygen 8 . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Oxygen 8 Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Utilizing the Key Programming Assignment Keys . . . . . . . . . . . . .16

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Technical Support & Contact Information . . . . . . . . . . . . . . . . . . . . . .21

Appendix A-Midi Char ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Oxygen 8 Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Oxygen 8

version: Oxy8_050503

Introduction

Congratulations on your purchase of the Oxygen 8,part of the USB Keystation series of MIDI controllers brought to y ou by M-Audio .You ma y use your Oxygen 8 in conjunction with a USB equipped PC or Macintosh computer and appropriate music software to enter a full range of MIDI note and controller information. You will be able to discover the wonderful world of Computer Music with a set of complete musical instruments from your sound card,sound modules, or workstation. The Oxygen 8 gives you full control over MIDI parameters,while utilizing proven M-Audio USB MIDI interface technology.The Oxygen 8 will also serve your needs as a standalone MIDI controller.

This manual will help you become familiar with the powerful features of the Oxygen 8.After reading the manual carefully,you will have a clear understanding of how to transmit different MIDI messages to other instruments and equipment. For ease of use of MIDI implementation, we strongly recommend that you have the manual at hand when you are using the keyboard,especially if you are new to the world of MIDI.

Oxygen 8 Features

• The Oxygen 8 MIDI controller keyboar d pr ovides 25 dynamic k eys,pitch and

mod wheels,a data slider, and 8 assignable rotary controllers.

• Connects easily to your computer’s USB port. No tools, and no disassembly

is required.When used with USB,the Oxygen 8 may be parasitically powered by your computer’s USB port.

• The Oxygen 8 may also be used as a completely portable standalone

controller when powered by 6 AA-size batteries.

• The Oxygen 8 provides two MIDI OUT jacks for connecting to MIDI devices

from either your computer, or as a standalone MIDI controller.

•There is also a socket for an optional sustain-footswitch.

• Although the Oxygen 8 has no built-in sound capabilities, it offers a great

variety of useful MIDI functions.

Oxygen 8 Overview

The Oxygen 8 is a fully functional MIDI controller. Its 25 keys can be set to play any octav e or transposed pitch,while the Oxygen 8’s pitch wheel,mod wheel and data slider with the addition of eight programmable rotary knobs make it the most versatile MIDI controller of its class.Its compact size and ability to run on battery power make it the ultimate in portable keyboard controllers.Virtually any type of MIDI controller information can be sent from the Oxygen 8 to your computer, using the power and convenience of the Mac or PC computer’s USB port. Additionally, the Oxygen 8 can operate as a “standalone” MIDI controller, independent of the computer. The rear panel MIDI port marked “keyboard” is used for this purpose.

Contained within the Oxygen 8 is a USB MIDI interface.Simply plug the Oxygen 8 into your computer’s USB por t, install the included drivers and enable the MIDI interface within your music software. This combination of a versatile keyboard controller and a USB MIDI interface allows you record and control MIDI information within your music application,plus adds a MIDI output port to which you can connect a MIDI sound module or drum machine. The rear panel MIDI port marked “USB” is used for this purpose.

The Oxygen 8 may be pow ered by one of three sources:external power supply, internal batteries, or “parasitically” from the voltage it receives from the USB port.For the most consistent perfomance,we recommend using a power supply or batteries,even when using the Oxygen 8 with your computer’s USB port.To power from the USB port only, plug the Oxygen 8 directly into the computer’s USB port, or into a powered USB hub.When using the Oxygen 8 in standalone mode, a power supply or batteries must be used. Six AA-size batteries are required when using battery power. When using an external power supply (optional), it is important to use only a supply with the proper 9vDC, 500ma rating. These may be purchased locally or through MIDIMAN.

On a PC: You must be running Windows 98 or higher to properly use the

Oxygen 8.Also,your motherboard must support USB or you will need to install

a PCI to USB host adapter to provide the USB ports. It is possible for a motherboard to support USB and yet not have the physical port connectors installed. A simple USB back panel extender can be purchased at a computer supply store and can be installed easily to provide USB port connectors.

On an Apple Computer : Your Apple must support USB with the built-in native

ports present. Standard iMac’s or G3/G4’s with USB ports will work just fine. A Mac OS that supports USB will also be required.W e r ecommend OS 9.2.2 or higher.We cannot guarantee performance of device when using non-Apple USB ports.

IMPORTANT: For MacOS 9, an OMS MIDI driver is provided. You MUST have

a sequencer program that supports OMS, and have OMS properly installed

in order to use the Oxygen 8.

What’s in the Box

Included in your Oxygen 8,you should find:

1. Oxygen 8 USB Keystation MIDI Controller

2. One (1) standard USB cable

3. PC and Mac driver disk

4. Owner’s manual and warranty card

Guide to Getting Started

Here’s an outline of steps to begin using your Oxygen 8 on either Mac or PC:

1. Attach the Oxygen 8 to your computer (see “Hardware Installation”).

2. Install the Driver (see “Software Installation”).

3. Hook y our sound module to the Oxygen 8 (see “Setting Up Your MIDI Studio”).

4. Configure the Oxygen 8 in your application software (see “Using the

Oxygen 8 in your Application Software”).

Hardware Installation

Installing your Oxygen 8 means simply attaching it to your USB port using the standard USB cable that is included. We recommend that you power down (turn off) your computer for a first time installation.If you are using the Oxygen 8 in USB mode, a power supply is not required—the computer’s USB port provides the power to run the Oxygen 8. The “wall-wart” or battery supply is only necessary for use in the standalone mode.However,when the Oxygen 8 receives its power from the USB port, we recommend either plugging directly into the computer’s USB port (not into the keyboard’s port or a powered USB hub.)

Find a good spot around your computer station to place the Oxygen 8.The USB port on your computer is a small (1/8” x 3/8”), rectangular connector (A) and is usually found in a group of two. The other end (B) of your USB cable is ‘more square’ (1/4” x 1/4”) in shape, and should fit easily into the USB connector on your Oxygen 8. Take the (A) end of the USB cable and plug it into the USB port on the back of your computer. Take the (B) end of the USB cable and plug it in to the USB port on the back panel of the Oxygen 8.

Next,power up y our computer and proceed to the next section,“Software Installation.”

Software Installation

MIDI application software communicates with devices such as the MIDI interface contained within the Oxygen 8 via software known as “drivers.” This software driver is a special,dedicated program that makes a MIDI interface accessible to an application. On the included driver disk,M-Audio supplies the drivers that enable you to use Oxygen 8 with either Windows, Mac OS9 or Mac OSX. Oxygen 8 drivers are supplied on the included dual format CD.

USB Driver Installation for Windows

This driver for the Oxygen 8 USB interface requires Windows 98 or higher. Please make sure that Windows 98SE, ME, 2000 or XP is installed on your system, and that your USB port is enabled. Check your computer manual for more information.

To verify your Windows installation after you have carefully followed these instructions, you may check your system’s “Device Manager,” located in the Control Panel under “System.” If you look in the Device Manager, you will find 2 parts for the Oxygen 8 KEYSTATION driver; one under the “Universal Serial Bus” controller group and the other under the “Sound, video, & game controllers” group.

Windows XP:

1 Insert the 'Oxygen 8' CD-ROM into your CD-ROM drive.

2. Open 'My Computer' or 'Windo ws Explor er' to locate y our CD-ROM drive.

Double-click the CD-ROM drive that contains the Oxygen 8 CD-ROM. Double-click the 'Oxygen 8' folder.

3. Double-click the driver icon to launch the installation procedure.

4. You will see an installer window advising you to have your Oxygen 8

DISCONNECTED from the USB bus before continuing.After you verify that your device is disconnected,click 'Next' to continue.

5. You will see a warning that this device has not passed Windows logo testing.

Click "Continue anyway".

6. When the installer has completed installation,click “Finish”.Plug in y our Oxygen 8.

7. You will see a “New Hardware found” dialog.(If you don’t see this dialog at

first,unplug your Oxygen 8 and tr y again.) Click Next.

8. You will see another warning that the product has not passed Windows logo

testing.Click "Continue anyway".

9. The installer will finish. Click “Finish” to continue .

10. You will see another window telling you that New Har dware has been f ound.

Click “Next”.

11. Again,the computer reminds you that the product has not passed Windows

Logo testing.Click "Continue anyway".

12. The driver has been installed.

Windows XP Installation is now complete.

Windows 2000

1. Service Pack 2 or higher is required for proper operation of the Oxygen 8

driver. This service pack is available from Microsoft Downloads at www.microsoft.com/downloads.

2. Insert the M-Audio Driver CD into your CD-ROM drive. Open 'My

Computer' or 'Windows Explorer' to locate your CD-ROM drive. Doubleclick the CD-ROM drive that contains the Oxygen 8 CD-ROM.

3. Double-click the Oxygen 8 Folder to open it.

4. Double-click on the Oxygen 8 Installer icon

5. A dialog bo x will appear,reminding you to exit all currently running pr ograms

and to disconnect the Oxygen 8 from the USB port.Do this,and click “Next” to continue.

The installer will scan your hard drive (this can take some time) and will then install the necessary files and perform setup actions on your system.A series of progress bars will show you how the process is going.

6. At the next prompt, the installer will warn you that this product does not

have a Windows Digital Signature.Click “Yes” to continue.

7. A dialog box will appear, stating that the installation has succeeded. Click

“Finish” to complete the driver installation.

8. Plug the Oxygen 8 into y our computer’s USB port.Be sure to either have the

power supply connected and power switch set to 9V, or if not using power supply, be sure to set the power switch to USB Power. Upon doing so,the computer will find and install the necessary drivers.

9. The installer will warn y ou that this product does not ha v e a Windows Digital

Signature.Click “Yes” to continue.

+ 16 hidden pages