Matsui MSH601W, MSH601BLK, MSH601WE, MSH601SS, MSH601BLKE Instruction Manual

GB

Cooker Hood

Model MSH601W MSH601BLK & MSH601SS

MSH601WE MSH601BLKE & MSH601SSE

1

• The Cooker Hood must be installed
according to the manufacturer’s instructions.
Improper installation may result in injury or
damage, for which the manufacturer cannot
be held responsible.

• Check that the voltage (230 Volts AC)
printed on the rating label inside the
Cooker Hood corresponds to the mains
voltage in your home. If in doubt call a
qualified electrician.

• Never replace the electrical cable yourself.
An authorised service centre must replace
damaged electrical cables.

• Adaptors, multiple sockets and/or extension
leads must not be used.

• To avoid electrical shock, never touch the
Cooker Hood or plug with wet hands.

• Ventilation outlets on the Cooker Hood
should never be covered, as obstructions
may cause overheating or fire.

• Always disconnect the plug from the mains
supply before cleaning the Cooker Hood or
carrying out maintenance work.

Safety

WARNING!

It is hazardous for anyone other than
authorised service personnel to carry out
Servicing or repairs which involves the
removal of covers.
To avoid the risk of an electric shock do not
attempt to repair this appliance yourself.

Disposal

Old appliances still have some residual value.
An environmentally friendly method of
disposal will ensure that valuable raw
materials can be recovered and used again.
Up to date information concerning options for
disposing of your old appliance and
packaging from the new one can be obtained
from your local council office.

• Do not flambé under the Cooker Hood as
this may cause a fire hazard.

• The Cooker Hood is not intended for use
by young children or infirm persons.

• The risk of fire is increased if cleaning
instructions are not followed correctly.