Matsui MS2W, MS2S Instruction Manual
MS2W/MS2S
This manual contains sections of Safety
Instructions,Operating Instructions,
Installation Instructions and Troubleshooting
Ti
p
s etc. Carefully reading it before using the
dishwasher will help you to use and maintain
the dishwasher properly.
To review the section on Troubleshooting Tips
will help you to solve some common problems
by yourself and not need to ask for the help of
professional technicians.
Inst ala tio n of dishwasher . . . . . . . . . . . . . . 2
Water inlet hos e con necti on . . . . . . . . . . . 3
. . .
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . 4
Dish was her F eat ure s . . . . . . . . . . . . . . . . . 4
Wash Cycle Tabl e . . . . . . . . . . . . . . . . . . . . 5
Water S of ten er . . . . . . . . . . . . . . . . . . . . . . 6
Deter
g
ent . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rins e A id . . . . . . . . . . . . . . . . . . . . . . . . . . 7,8
Loading the Dishwasher Ra ck . . . . . . . . . 8,9
Turning On t he Appli anc e . . . . . . . . . . . . . . 9
Fi ltering Syste m . . . . . . . . . . . . . . . . . . . . . 10
Cari ng for t he Dishw asher . . . . . . . . . . 11
About Electr ici ty connection . . . . . . . . . . 12
Befo re calli ng for service. . . . . . . . . . 12,13
. . . . . . . . . . . . . . . . . . 1
The manufacturer, following a policy of constant
development and up-dating of the product, may
make modifications without giving prior notice.
This appliance must be grounded. In the event
of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a
path of least resistance of electric current. This
appliance is equipped with a cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate
outlet that is installed and grounded in accordance
with all local codes and ordinances.
1
Keep child away from detergent and rinse aid, keep
child away from the open door of the dishwasher,
there could still be some detergent left inside.
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not touch the heating element during or
immediately after use.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent. For plastic
items not so marked, check the manufactures
recommendations.
Use only detergent and rinse additives designed
for an automatic dishwasher. Never use soap ,
laundry detergent, or hand washing detergent
in your dishwasher. Keep these products out of
the reach of children.
During installation, the power supply must not
be excessively or dangerously bent or flattened.
The door should not be left in the open position
since this could present a tripping hazards.
Do not tamper with controls.
Do not place any heavy objects or stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1
)
Locate sharp items so that they are not likely to
damage the door seal;
2) Load sharp knives with the handles up to reduce
the risk of cut-type injuries.
When using your dishwasher, you should prevent
plastic item from contacting with heating element.
If the supply cord is damaged, it must be replaced
by the manufa ctu rer or it s s ervice ag ent or a
similarly qualified person in order to avoid a
hazard.
Please dispose of packing materials properly.
Use the dishwasher only for its intended function.
Remove the door to the washing compartment when
removin
g
an old dishwasher from service or discarding it.
The appliance is not intended for use by young
children or infirm persons without supervision.
Dishwasher detergents are strongly alkaline,they
can be extremely dangerous if swallowed.Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.
Young children should be supervised to ensure that
they do not play with the appliance.
Check that the detergent receptable is empty after
completion of the wash cycle.
The appliance is to be connected to the water mains usin
g
the new hose set provided. Old hose-sets should not be
re-used.
Remove all packaging befor e positioning the
machine.
See the followin
g
di agram.Ensure there is a
clearance each side of the machine to allow
slight side ways movement for servicing
Work to p of your dishwasher is removabl e
if re
q
uired. Height without the work top is
820 mm.
By removing the machine's worktop,you can
install it under a close fittin
g
sink unit or a
pre-existing top,if the dimensions of the
recess correspond to those shown in the
picture.
To remove the worktop;remove two screws
as s how n at the rear of the work top on either
side,lift up the rear section, push forward
to release off the lug at the front section of
the appliance and lift up.
Remo ve the p ol yst yre ne bl ock and if you wis h
save for future re-use.
Position the machine next to a water tap and
a drain.
When inse rting the maching, ensure t hat the
water inlet and drain hoses are not kinked or
squashed.
Care must be taken to ensure that the
appliance does not stand on the electrical
supply cable.
Good levellin
g
is essential for correct closure
and sealing of the door.
When the appliance is correctly levelled,the
door will not catch on the inner liner on either
side of the cabinet.
If the door does not close corr ectly, loosen
or tighten the adjustable feet, until the
machine is perfectly level.
450mm
M
i
n
4
5
0
m
m
820mm
850mm
Min850mm
9
0
m
m
1
5
0
m
m
M
i
n
5
8
0
m
m
3
0
m
m
5
8
0
m
m
2
1
5
m
m
qualified plumber.
maximum of 10 bars.
Make sure your plumbing is suitable to install
your new dishwasher. If in doubt contact a
The water pressure coming from the water
mains supply must be a minimum of 0.4 and a
First connect water inlet hose to your
dishwasher Ensure black rubber seal is
in place.
Then connect the straight end to your water
mains supply Ensure black rubber seal is
in place.
Please turn on the tap and check for leakages
after connecting the hose.
Please ensure the tap is turned off when the
machine is not used.
If you only have one cold water
feed
(
For example for your
washing machine don't worry.
a Y adaptor will provide you with
the additional cold water feed
you need for your dishwasher.
Y adaptor is available from most
DIY stores.
Ø
1
8
Ø
2
1
max 100 cm
min 40 cm
min 4cm
max 100 cm
12cm
3
Fit the drainage hose of your machine
to the drainage pipe without bending.
washing process.
Secure your hose fi rm ly to the waste
pipe to avoid it coming off during the
drainage system.
The waste
pip
e must only be connected
into the foul drains and not surface water
The hose should be placed between
40 cm and 100 cn from the f loor level
and must not be extended otherwise the
machine may not empty the waste water.
Loading...