Matsui MCE60KN-B, MCE61TC User Manual
MCE60KN-B
getting to know your hob.....................................................................................3
important safety notes............................................................................................4
control panel MCE60KN-B.......................................................................................6
instructions for use MCE60KN-B.................................................................................7
hints and tips ........................................................................................................ 8
installation guide...................................................................................................10
specifications........................................................................................................14
contents
2
3
Elements
Element control
Hot surface indicators
Thank you for choosing a Matsui Vitroceramic Builtī«in Hob. We hope the following
information will help you to familiarise yourself with the features of the hob and to
use it successfully and safely.
Please read the instructions in this user guide before using the hob and keep it for
future reference.
PLEASE NOTE: The electrical connection of this hob should be carried out by a
qualified electrician, according to the instructions in this guide and in compliance
with the current regulations. Give this guide to your electrician, the connection
instructions are on page 13.
getting to know your hob
4
important safety notes
We have included this section for your safety. Please read this information carefully
before using your hob.
Safety notes:
.
Make sure all the packaging has been removed before you use the hob.
.
Keep all packaging until you are sure that the hob is working properly.
.
Retain this user guide and your receipts for future reference.
.
The electrical safety of this hob is guaranteed only if it is connected to a properly
earthed system, which complies with the electrical safety standards in force. If you
cannot verify that this fundamental safety requirement is in place, consult a qualified
electrician.
.
Do not put pressure on the power supply cable while fitting the hob.
.
Never replace the power supply cable yourself. Damaged cables must only be
replaced by an authorised service centre.
.
Adaptors, multiple sockets and/or extension leads must not be used.
.
Never leave the hob unattended when cooking with fat or oil. They can rapidly catch
fire if overheated.
.
This hob must only be used for the purpose of heating or cooking food, any other
use, for example heating rooms, is dangerous. The manufacturer will not be liable
for damages resulting from improper, incorrect or negligent use.
.
Be careful when using small household appliances, such as irons, near the elements
and make sure the power cable is kept well away from hot surfaces.
.
Make sure all the controls are in the off position when not in use.
WARNING:
.
It is hazardous for anyone other than authorised service personal, to carry out
servicing or repairs which involve the removal of covers.
.
To avoid the risk of an electric shock, do not attempt repairs yourself.
.
In the event of any damage that occurs as a result of improper connection or
installation. The warranty will not be valid.
5
.
Use only stable flat-based pans. They should be placed on the hob with handles
turned inwards away from the edge of the work top so that they are not accidentally
knocked or pulled over.
.
Do not use flammable liquids (alcohol, petrol) near the hob when it is in use.
.
When an element is turned on, a little noise may be heard and the surface will
turn red, this is normal.
.
If sharp edged dishes are scraped on a surface of a Virtroceramic hob, it may
cause damage to the surface.
.
Do not cut bread on the glass of the Vitroceramic hob.
.
If you notice any cracks on your Vitroceramic hob surface, disconnect it from the
supply source to avoid the possibility of an electric shock.
.
It is advisable to have a smoke detector fitted in your home, and have a fire blanket
or extinguisher close to the hob.
.
Do not use a steam cleaner to clean your hob.
.
Harsh, abrasive cleaners should not be used as they can scratch the glass surface.
.
Glass panels should not be used as working surfaces.
.
Any maintenance must be carried out by a qualified electrician with the mains
supply disconnected.
important safety notes
Loading...