Masterflex 77200-03, 77200-04 MOUNTING INSTRUCTIONS

Cole-Parmer Instrument Company

Manufactured by: Barnant Company

MOUNTING INSTRUCTIONS

77200-03, 77200-04

Mounting Instructions for three or four MASTERFLEX®L/S®EASY-LOAD and L/S EASY-LOAD II PUMP
HEADS.

Use only MASTERFLEX precision tubing with MASTERFLEX Pumps to ensure optimum performance.
Use of other tubing may void applicable warranties.

Mounting Kit Number of

Catalog No

. Pump Heads

Description
77200-03 3 Stainless steel mounting hardware
77200-04 4 Stainless steel mounting hardware

Assembly Instructions:

1) Install studs into pump drive (short threaded end into drive).

2) Slide the pumps into place on the studs.

3) Place support bracket onto studs.

4) Install washers and wing nuts onto studs and hand-tighten.

5) Adjust leveling screw to support pump heads.

6) Tighten locknut to prevent movement.

Trademarks bearing the ® symbol in this publication are registered in the U.S. and in other countries.

Printed in U.S.A.
021101

Cole-Parmer Instrument Company • 625 East Bunker Court • Vernon Hills, Illinois U.S.A.60061-1844

800-MASTERFLEX (627-8373) • [phone] (Fax) • e-mail:[e-mail] • www.masterflex.com

A-1299-0647

Edition 02

SUPPLIER CERTIFIED

PUMP
DRIVE

WASHER

WING NUT

STUD

PUMP
HEADS

SHORT

THREADED

END

LEVELING

SCREW &
LOCKNUT

SUPPORT

BRACKET