Masterflex 77200-02 MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
Mounting Kit Catalog No.
Number of Pump Heads
Description
77200-02
2
Stainless steel mounting hardware
Assembled by:
77200-02
Mounting Instructions for two MASTERFLEX
Use only MASTERFLEX precision tubing with MASTERFLEX Pumps to ensure optimum performance.
Use of other tubing may void applicable warranties.
Assembly Instructions:
1. Install studs into pump drive (short threaded end into drive).
2. Slide the pumps into place on the studs.
3. Install washers and wing nuts onto studs and hand-tighten.
Trademarks bearing the ® symbol in this publication are registered in the U.S. and in other countries.
®
L/S® EASY-LOAD® and L/S® EASY-LOAD® II PUMP HEADS.
Page 1 of 1
A-1299-0646
Printed in U.S.A. Edition 06
Loading...