Masterflex 07519-60, 07519-50 Instruction Manual

OP ER ATING MAN UAL
®
CAR TRIDGE
PUMP HEAD SYS TEM
Pump Head Models
07519-05 07519-06
Car tridge Models
Small: 07519-60 Large: 07519-50
Cole-Parmer In stru ment Co.
625 East Bunker Court
Vernon Hills, Il li nois U.S.A. 60061-1844
800-MASTERFLEX (627-8373)
(847) 247-2929 (Fax)
www.masterflex.com
e-mail: techinfo@coleparmer.com
A-1299-0539
Edi tion 08
®
®
CON TENTS
Ti tle Page
SAFETY PRECAUTIONS .................................... ii
IN TRO DUC TION .......................................... 1
(1) Ap pli ca tion Data ..................................... 1
(2) Gen eral De scrip tion .................................. 2
IN STAL LA TION ........................................... 3
SETUP .................................................. 4
(1) Se lect Car tridges ..................................... 4
(2) Load Car tridges ...................................... 5
(3) Re tainer Ad just ment/Car tridge Re moval .................... 7
(4) Bi-Directional Pumping ................................. 7
OP ER A TION ............................................. 8
(1) Se lect Tubing and Pump Heads ......................... 8
(2) Se lect Pump Speed ................................... 9
(3) Ad just Oc clu sion Set tings on Car tridges .................... 9
MAIN TE NANCE ........................................... 11
Ser vice Parts .......................................... 11
SPEC I FI CA TIONS ......................................... 12
WAR RANTY ............................................. 13
PRO DUCT RE TURN ....................................... 13
TECH NI CAL AS SIS TANCE .................................. 13
®
AP PEN DIX A MASTERFLEX
AP PEN DIX B Car tridge Loading Ca pac ity ..................... B-1
L/S® Pump Drive Types ............ A-1
C-FLEX -Reg TM Con sol i dated Poly mer Tech nol ogies, Inc. PHARMED, NORPRENE, TYGON -Reg TM Norton Co. VITON -Reg TM DuPont Dow Elas to mers L.L.C. Trade marks bear ing the ® sym bol in this pub li ca tion are reg is tered in the U.S. and in other coun tries
These prod ucts are cov ered by one
or more of the fol low ing U.S. and
cor re spond ing for eign pat ents:
4,886,431 and 5,257,917
i
SAFETY PRECAUTIONS
WARNINGS: Tubing break age may re sult in fluid be ing sprayed from
pump. Use ap pro pri ate mea sures to pro tect op er a tor and equip ment.
Turn drive off be fore re mov ing or in stall ing car tridges. Safety guards are pro vided to min i mize risk of fin gers get ting caught be tween the roller mech a nism and the base of the mod ule. How ever, be safe—Keep your fin ­gers away from these ar eas.
CAUTIONS: Ex ces sive oc clu sion can cause high pump tem per a -
tures and early tub ing and roller fail ure. Do not set occlusion tighter than what is rec om mended in Ta ble #3.
Large Car tridge 07519-50 should not be used with microbore tub ing—may re sult in pre ma ture tub ing failure.
WARNING: PRO DUCT USE LIM I TA TION
These prod ucts are not de signed for, nor in tended for use in pa tient con nected ap pli ca tions; in clud ing, but not lim ited to med i cal and den ­tal use, and ac cord ingly have not been sub mit ted for FDA approval.
ii
IN TRO DUC TION
The in struc tions in this man ual are task-oriented for easy ref er ence. You can go di rectly to a par tic u lar sec tion and quickly find the an swers. Ap pen ­dix A and B list MASTERFLEX
®
L/S® pump drive types that can be used
with this sys tem.
Pump Heads
MODEL TYPE
Model 07519-05 Model 07519-06
3-Roller, 4 or 8 Chan nel 4-Roller, 4 or 8 Chan nel
Car tridges
MODEL TYPE
Model 07519-50 Model 07519-60
These car tridge pumps are de signed to pro vide up to 8 si mul ta neously driven pump chan nels and in cor po rate the fol low ing fea tures.
Si mul ta neous dis pens ing into an 8 bank set of test tubes with one set-up
and pump cy cle.
The four-roller de sign pro vides re duced pul sa tion.
Large Small
(1) Ap pli ca tion Data
The Car tridge Pump Sys tem is de signed for multi-channel use where close oc ­clu sion con trol of a va ri ety of dif fer ent flows is re quired. All stan dard and many spe cial tub ing sizes and ma te ri als can be used, de liv er ing from .015 mL/min to 2 L/min.
1
(2) Gen eral De scrip tion
Each Pump Head Sys tem is com posed of a heavy-duty Pump Head and two sizes of snap-in tub ing car tridges, each with in di vid u ally ad just able oc ­clu sion set tings. The oc clu sion “wedge” de sign pro vides ac cu rate and more bal anced flow con trol.
The Pump Heads con tain ei ther three or four roll ers. All mod els can op er ate with a va ri ety of tub ing and with ei ther the small or the large car tridges.
®
The Pump Head quickly mounts to most ex ist ing MASTERFLEX
L/S
Pump Drive types (see Ap pen dix A and B).
MOUNTING HOLES
TANG (REAR OF PUMP HEAD)
®
MOTOR MOUNTING SCREWS (4)
SCREWDRIVER CLEARANCE HOLE
ADJUSTABLE FOOT
LOCKNUT
FIGURE 1 PUMP MOUNTING
SAFETY GUARD
CARTRIDGE MOUNTING RODS
BOOT
2
Loading...
+ 13 hidden pages