Master-Bilt DOMC-084 User Manual

ITEM NO. ______________________________________________________

PROJECT ______________________________________________________

LOCATION _____________________________________________________

DATE _________________________ QTY. ___________________________

DOMC SERIES

Cold Wall Evaporator
Dual Access Milk Coolers

MODELS

❑ DOMC-084
❑ DOMC-124
❑ DOMC-164

DOMC-124

FEATURES

FEATURES

CONSTRUCTION

• White enamel painted steel exterior

• Galvanized steel interior including
door interior

• Dual access to allow serving of
two feeding lines

• Four 4" easy-roll swivel casters (two
locking)

• Epoxy-coated heavy-duty oor racks
(stainless steel option available)

• Reinforced base to maintain cooler
integrity when fully loaded

• NSF-listed oor drain

• NSF-listed thermometer

1

• 2

/2" berglass insulation

• Doors and cabinet top foamed-in­place with polyurethane insulation

DOORS

• Self service doors with stainless steel
exterior

• Doors are fold-back type

• Doors equipped with locks,
gaskets and stainless steel hinges

• Designed to be easily opened by
children for self-service

• Hold-open feature secures door dur­ing serving

REFRIGERATION

• Self-contained, bottom mount

• Powerful, large-capacity system al­lows cooler to maintain proper tem­perature for longer amount of time
with doors open

• Cold wall evaporator with no
moving parts which allows more stor­age space

• Back of cabinet may be placed against
wall but there must be a minimum 4"
clearance between cabinet sides and
wall

• Refrigerant: R-134A

• Operating temperature: 38°F (3°C)

WARRANTY

• Standard limited three year
extended compressor and two year
limited parts and labor

OPTIONS

CAPACITY

CASES WITH CARTONS

13" x 13" x 11"H 19" x 13" x 11"H

MODEL

DOMC-084 8 352 4 288 864 432
DOMC-124 12 528 8 576 1368 684
DOMC-164 16 704 12 864 1800 900

CASES CARTONS CASES CARTONS 1/2 PINT 1 PINT

908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com

LOOSE CARTON

(WITHOUT CASES)

❑ Add "SS" for stainless steel inte-

rior and exterior

❑ Laminate for top, front, sides and

back

❑ (4) six-inch adjustable legs
❑ Strip curtain
❑ Stainless steel oor rack
❑ Corner bumpers

DOMC SERIES

LISTINGS

HOOKUP

BID SPECIFICATIONS

COLD WALL EVAPORATOR DUAL ACCESS MILK COOLERS

TECHNICAL SPECIFICATIONS

DIMENSIONS

(in.)

MODEL

DOMC-084 35 35 44 889 889 1118 115 4.1 1/4 2 12.2 36.7 326/148
DOMC-124 49 35 44 1245 889 1118 115 4.8 1/4 3 17.8 49.9 352/160
DOMC-164 63 35 44 1600 889 1118 115 5.7 1/4 4 23.5 64.0 484/220

*Height includes casters.

SIDE VIEW DOMC-084

ELEVATION VIEW

DIMENSIONS

(mm)

VOLTS AMPS

DOMC-124

ELEVATION VIEW

UNIT

H.P.

NO. OF
FLOOR
RACKS

CAP.

CU. FT.

SHIP

CU. FT.

DOMC-164

ELEVATION VIEW

SHIP

WT.

LB/KGL D H* L D H*

Item no. DOMC- _______ ________
Provide______ _______( ) Cold Wall
Evaporator Dual Access Milk Cooler(s),
Master-Bilt model no. DOMC-________ __.

Milk cooler will be a dual access type
and will be constructed of white painted
steel on the exterior with galvanized steel
interior. Doors to be stainless steel on the
exterior with galvanized steel interior.
Doors will also be locking and fold-back
type. In addition, door will be equipped
with gaskets, stainless steel hinges and a

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.

Via plug in, 7 foot long exible three wire 16
gauge cord with molded plug.

hold-open feature to secure during serv­ing.

Cooler to be provided with four swivel
casters (two locking) and an NSF-listed
oor drain and thermometer. Additional­ly, cooler will contain heavy-duty epoxy­coated oor racks and a reinforced base
to maintain cooler integrity when fully
loaded. Cabinet insulation will consist
of 21/2" thick berglass. Door and cabinet
top foamed-in-place with polyurethane
insulation.

908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com

©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.

The refrigeration system will be self-con­tained, bottom mounted with a cold wall
evaporator. System will contain R-134A
refrigerant. The operating temperature will
be 38°F (3°C).

Cooler to have standard limited three
year extended compressor warranty and
two year limited parts and labor warranty.

Cooler to be UL and C-UL listed as well
as UL EPH classied.

NEMA 5-15P

1251-6/10-web