Master-Bilt DD-26 User Manual

DD-46L

DD-46

DD-46CG

ITEM NO. ______________________________________________________

PROJECT ______________________________________________________

LOCATION _____________________________________________________

DATE _________________________ QTY. ___________________________

DD/DD-CG/DD-L SERIES

Deluxe Ice Cream
Dipping/Display
Merchandisers

CURVED LOW
STANDARD GLASS GLASS
MODELS MODELS MODELS

❑ DD-26 ❑ DD-26CG ❑ DD-26L
❑ DD-46 ❑ DD-46CG ❑ DD-46L
❑ DD-66 ❑ DD-66CG ❑ DD-66L
❑ DD-88 ❑ DD-88CG ❑ DD-88L

FEATURESFEATURES

CONSTRUCTION

• Attractive, contemporary design

• 24 gauge painted textured
interior and exterior

• Equipped with leveling legs to
correct for unlevel flooring
situations

• Rear air intake and discharge
eliminates front grille and allows
full front of cabinet for graphics

• Independent on/off compressor
and light switch

• Stainless steel top and attached
superstructure

• Tempered plate glass viewing
window

• Drain with garden hose connec­tor for ease of cleaning

• Brilliant, interior fluorescent
lighting

• Stainless steel serving deck

• Top and side lid wiper gaskets

• Heavy-duty epoxy-coated wire
can support racks

• 9 ft. long cord with molded plug

1

• 2

/4" foamed-in-place “zero

ODP” urethane insulation

• Number and length of interior
light fixtures:
– DD-26/26CG/26L ... (1) 18"
– DD-46/46CG/46L ... (1) 36"

– DD-66/66L .... (1) 18", (1) 36"

– DD-66CG ................ (2) 18"

– DD-88/88CG/88L ... (2) 36"

LIDS

• Hinged, high-tensile, transparent
acrylic dipping compartment
lids with full length handle

REFRIGERATION

• Refrigerant:
– DD-26/26CG/26L,

DD-46/46CG/46L ....R-134a

– DD-66/66CG/66L,
DD-88/88CG/88L ... R-404A

• Cold wall evaporator

• Low maintenance bare tube
condenser coil on all models
except DD-26/26CG/26L

• No minimum clearance required
on cabinet sides but front, back
and top must be left open for
customer and operator access

• Temperature range:
5° to -5°F (-15° to -21°C)

• R-factor (insulation efficiency
rating): 19.40

WARRANTY

• Standard limited two year parts
and labor

• Additional three year coverage
on compressor part

908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com

DD/DD-CG/DD-L SERIES

DELUXE ICE CREAM DIPPING/DISPLAY MERCHANDISERS

OPTIONS

❑ Rear service doors for DD-46, DD-66 and DD-88 models (factory installed)
❑ Custom colors
❑ Removable can holders with white overnight can covers
❑ Dipper well
❑ Removable frost shields
❑ Leg kit
❑ Casters
❑ Lid locking kit (less locks)
❑ Flavor identification tabs (for DD and DD-CG models only)

REAR SERVICE DOOR FOR DD-46, DD-66 AND DD-88

FROST SHIELDS LID LOCKING KIT

FLAVOR IDENTIFICATION TAB

CAN HOLDERS

TECHNICAL SPECIFICATIONS

DIMENSIONS

(in.)

MODEL

DD-26/26CG/26L 261/2273/4* 673 705 * 115 7.4 1/3 4/0 3.5 38.0 240/109
DD-46/46CG/46L 47

DD-66/66CG/66L 69
DD-88/88CG/88L 90

*Height of standard and low glass models: 50" (1270mm), curved glass models: 52" (1321mm). **Capacities in 9

†

Measured to the load line level.

3

/4273/4* 1213 705 * 115 7.5 1/2 8/4 9.6 54.0 370/168

1

/4273/4* 1759 705 * 115 9.7 1/2 12/8 16.0 76.0 495/225

3

/4273/4* 2305 705 * 115 11.5 3/4 16/12 22.5 97.0 600/273

DIMENSIONS

(mm)

VOLTS AMPS

UNIT

H.P.

CAN CAP.**

DISPLAY/
STORAGE

CAP.

CU. FT.

SHIP

SHIP

†

CU. FT.

1

/2" diameter, 3 gallon cans.

WT.

LB/KGL D H L D H

PLAN VIEW

STANDARD & CURVED

GLASS ELEVATION VIEW

STANDARD

SIDE VIEW

CURVED GLASS

SIDE VIEW

LISTINGS HOOKUP

Via plug in, 9 foot long, flexible 3 wire
14/3 cord with molded plug. Drain hookup
has standard garden hose connection.

LOW GLASS

ELEVATION VIEW

LOW GLASS

SIDE VIEW

NEMA 5-15P

DD/DD-CG/DD-L SERIES

DELUXE ICE CREAM DIPPING/DISPLAY MERCHANDISERS

BID SPECIFICATIONS

Item no. DD-_______________
Provide_______________( )
Deluxe Ice Cream Dipping/Dis­play Merchandiser(s), Master-Bilt®
model no. DD-__________.

Cabinet will feature textured
finish on interior and exterior.
Cabinet to be provided with inde­pendent on/off compressor and
light switch, drain connection,
stainless steel top and super­structure, tempered plated glass
viewing window and interior
fluorescent lighting. Cabinet is to

have rear air intake and discharge.
Standard leveling legs provided to
correct for unlevel flooring situa­tions. Hanging frost shields with
mounting screws offered as an
option (consult your Master-Bilt®
representative for additional
options).

Cabinet will be provided with 9

foot cord and molded plug.

DD-26/26CG/26L and DD­46/46CG/46L will use R-134a re­frigerant while DD66/66CG/66L
and DD-88/88CG/88L will use

R-404A refrigerant. The tempera­ture range will be 5° to -5°F (-15°
to -21°C). All models except DD­26/26CG/26L to be supplied with
a refrigeration system containing
low maintenance bare tube con­denser coil.

Cabinet to have standard limited

two year parts and labor with addi­tional three year coverage on compres­sor part

.

Cabinet to be UL, C-UL and NSF

listed.

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specifications subject to change without notice.

908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com

©2016 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.

274-6/16-web