Master Bilt DC-4D, DC-6D, DC-10D, DC-12D, DC-2S User Manual
...
DC-2S
DC-8D
C-UL listing for
all models
except
DC-12D.
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
DC SERIES
Conventional
Ice Cream Storage/Dipping
Cabinets
MODELS
❑ DC-2S ❑ DC-8D
❑ DC-4S ❑ DC-10D
❑ DC-4D ❑ DC-12D
❑ DC-6D
FEATURES
FEATURES
CONSTRUCTION
• Seamless stainless steel top
• 24 gauge white painted
galvanized steel cabinet
• Equipped with leveling legs to
correct for unlevel ooring
situations
• Floor drain with garden hose
tting
• Galvanized steel inner liner with
cold wall evaporator
• Anti-condensate heaters under
stainless top cap
• 21/4" foamed-in-place “zero
ODP” urethane insulation
FINISH
• Baked-on white polyester enamel
exterior nish with galvanized
steel interior
LIDS
• Stainless steel
• Hinged with handles
• Gasket
REFRIGERATION
• Refrigerant:
DC-12D ..........................R-404A
All other models ............ R-134a
• Self-contained, factory tested
refrigeration system
• Force draft hermetic condensing
unit (semi-hermetic unit on DC12D with wire and tube condenser for low maintenance)
• Temperature range:
10° to -10°F (-12° to -23°C)
• R-factor (insulation efciency
rating): 19.40
WARRANTY
• Standard limited four year
extended compressor and one
year limited parts and labor
OPTIONS
❑ Add sufx “SE” for all-
stainless exterior
❑ Custom colors
❑ Lid locks
❑ Legs
❑ Casters
❑ Additional lids
❑ Load level shelves
❑ Dipper well
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
DC SERIES
LISTINGS
HOOKUP
BID SPECIFICATIONS
CONVENTIONAL ICE CREAM STORAGE/DIPPING CABINETS
TECHNICAL SPECIFICATIONS
DIMENSIONS
(in.)
MODEL
DC-2S 317/8211/8341/8810 537 867 115 5.7 1/4 2/1 5.2 19.0 195/89
DC-4S 54 21
DC-4D 30
DC-6D 43 30
DC-8D 54 30
DC-10D 66
DC-12D 84
*Capacity in 3 gal. cans **Semi-hermetic compressor
1
5
5
5
/8341/81372 537 867 115 5.7 1/4 5/4 11.0 36.0 280/127
/8301/8341/8778 765 867 115 5.7 1/4 5/2 7.6 27.0 220/100
1
/8341/81092 765 867 115 5.7 1/4 8/5 12.5 39.0 275/125
1
/8341/81372 765 867 115 7.3 1/3 11/8 17.3 47.0 365/164
/8301/8341/81692 765 867 115 7.3 1/3 14/11 22.0 59.0 430/195
/8301/8341/82149 765 867 115 7.5 1/3** 18/15 29.1 71.0 490/223
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
CAN CAP.
DISPLAY/
STORAGE*
CAP.
CU. FT.
SHIP
CU. FT.
SHIP
WT.
LB/KGL D H L D H
PLAN VIEW SIDE VIEW ELEVATION VIEW
C-UL listing for all models except DC-12D.
Item no. DC-_______________
Provide_______________( ) Conventional Ice Cream Storage/Dipping
Cabinet(s), Master-Bilt model DC-________.
Cabinet to have ip lids, seamless
stainless steel top, 24 gauge steel walls,
galvanized steel inner liner with cold
wall evaporator, anti-condensate heaters
NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.
Via plug in, 9 foot long, exible 3 wire 14/3
cord with molded plug. Ten amp 115V service
NEMA 5-15P
is recommended.
under stainless steel top, 21/4" foamed-inplace “zero ODP” urethane insulation and
baked-on polyester enamel nish. Standard
leveling legs provided to correct for unlevel
ooring situations.
The refrigeration system will be selfcontained. DC-12D will contain R-404A refrigerant and all other models will contain
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
R-134a. The temperature range will be 10°
to -10°F (-12° to -23°C).
Cabinet to have standard limited four
year extended compressor warranty and one
year limited parts and labor warranty.
Cabinet to be UL, C-UL (on all except
DC-12D) and NSF listed.
287-1/07-web
Loading...