Master-Bilt BGR15 Installation Manual

Master-Bilt

908 Hwy. 15 North

New Albany, MS 38652

800-647-1284 Fax [phone]

INSTALLATION AND OPERATION

MANUAL

BGR15

Congratulations! You have just purchased the finest commercial

refrigeration available.

6/16 Rev. A 57-02501 •••• www.master-bilt.com ••••

Table of Contents

INSTALLATION AND OPERATION MANUAL ........................................................................ 1

APPLICATION ...................................................................................................................................... 3

PRODUCT REGISTRATION ................................................................................................................ 3

DIRECTIONS FOR STORAGE AND HANDLING THE EQUIPMENT ............................................ 3

STORAGE OF THE EQUIPMENT ................................................................................................... 3

UNCRATING ..................................................................................................................................... 3

MOVING THE EQUIPMENT ........................................................................................................... 3

PLACING AND INSTALLING THE EQUIPMENT ............................................................................ 4

ELECTRICAL REQUIREMENTS ........................................................................................................ 5

POSITIONING SHELVES ..................................................................................................................... 5

PRODUCT LOADING ........................................................................................................................... 6

UNIT OPERATION AND COMPONENTS .......................................................................................... 6

ELECTRONIC TEMPERATURE CONTROL .................................................................................. 6

PRESCRIPTIONS, PROHIBITIONS AND OTHER USES FOR THE EQUIPMENT ........................ 8

SHELF SPECIFICATIONS .................................................................................................................... 8

MAINTENANCE GUIDELINES .......................................................................................................... 9

You have selected one of the finest commercial refrigeration units made. It is
manufactured under strict quality controls with only the best quality materials available.
Your Master-Bilt

®

cooler, when installed correctly and properly maintained will give you

many years of trouble-free operation.

WARNING!

U

SE THIS APPLIANCE FOR ITS INTENDED PURPOSE AS DESCRIBED IN THIS MANUAL

When using electrical appliances, basic safety precautions should be followed, including the following:

• Use this appliance for its intended

purpose as described in this Owner
Manual.

• This refrigerator must be properly

installed and located in accordance with
the Installation Instructions.

• We strongly recommend that any

servicing be performed by a qualified
individual.

• Do not allow children to climb, stand, or

hang on the shelves in the refrigerator.

They could damage the refrigerator and
seriously injure themselves.

• Do not store or use gasoline or other

flammable vapors and liquids in the
vicinity of this or any other appliance.

• Unplug the refrigerator before cleaning

and making

repairs.

•••• www.master-bilt.com • Pg. 2 ••••

CAREFULLY READ THESE INSTRUCTIONS. This manual provides instructions in how to best locate,

Figure

1

operate, and maintain this equipment.
It is recommended to keep this manual for any future reference.

APPLICATION

The BGR series of coolers have a sanitation listing permitting the merchandising of packaged food and
beverage product. The unit must be located in an indoor environment where the ambient must be
maintained less than 90

o

F/65%RH.

PRODUCT REGISTRATION

Write down the Serial number of your new unit for future reference. The Serial Number is found on the
data plate located on the back of the unit and on the inside top left side of the cabinet.

MODEL:

SERIAL NUMBER:

DIRECTIONS FOR STORAGE AND HANDLING THE EQUIPMENT

STORAGE OF THE EQUIPMENT

If the equipment will be kept in storage, it is suggested to keep it in its original packing.
In case you need your equipment to be inactive for a long period of time after being used, verify that it
has been unplugged. After cleaning it thoroughly with a damp cloth, lukewarm water and neutral soap
and carefully drying it, cover it with a polyethylene film or similar waterproof material.

UNCRATING

The following procedure is recommended for uncrating the unit:
Remove the outer package by carefully cutting the shrink wrap and removing the 4 corner posts and top
lid.
Inspect for concealed damage. Immediately file a claim with the freight carrier if there is damage.
Move your unit as close to the final location as possible before removing the wooden skid.

MOVING THE EQUIPMENT

The unit is constructed to facilitate using a forklift to handle it. (Fig. 1) Use
this handling means to move the equipment as close as possible to the
location where it will be installed.

IMPORTANT: Never push, pull or strike the front glass.

•••• www.master-bilt.com • Pg. 3 ••••