Marvel MP24BCG3RS Owners Manual

EN Installation, Operation and Maintenance Instructions

FR Instructions d’installation, d’utilisation et d’entretien ES Instrucciones de instalación, operación y mantenimiento

Built in Refrigerators Réfrigérateurs intégrées Refrigeradores empotradas

MP15BC MP24BC MP24BR MP24RA

CONTENTS

Contents:

Safety information ...............................................................2

Unpacking your appliance ..................................................3

Warranty registration .....................................................3

Installing your appliance ......................................................4

Cabinet clearances .........................................................4

Leveling the appliance ....................................................4

Electrical connection ......................................................5

Product dimensions ............................................................6

Using your Electronic control .............................................8

Starting your appliance ...................................................8

Sleep mode ....................................................................8

Turning your appliance "ON" or "OFF" ...........................8

Adjusting the temperature ..............................................8

Interior display lighting ....................................................9

Temperature mode .........................................................9

Control lock ....................................................................9

Temperature sensor error codes ....................................9

Alarms ..........................................................................10

Door ajar ...................................................................10

Power failure ............................................................10

Temperature alarm ...................................................10

Vacation mode ..............................................................11

Overlay door panel installation ........................................11

Shelving congurations ....................................................17

Care and cleaning .............................................................20

Energy saving tips .............................................................20

Obtaining service .............................................................21

Troubleshooting ................................................................22

Warranty ...........................................................................23

Important Safety Instructions

Warnings and safety instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operating this appliance.

Recognize Safety Symbols,

Words, and Labels.

WARNING

WARNING - You can be killed or seriously injured

if you do not follow these instructions.

CAUTION

CAUTION-Hazards or unsafe practices which could re-

sult in personal injury or property / product damage.

NOTE

NOTE-Important information to help assure a problem

free installation and operation.

WARNING

State of California Proposition 65 Warning:

This product contains one or more chemicals known to the State of California to cause cancer.

WARNING

State of California Proposition 65 Warning:

This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm..

is committed to building a quality product in an environmentally friendly manner. Our processes are tightly controlled and closely monitored. We have achieved

certications in ISO 9001 for quality assurance, ISO 14001

for environmental management, and OHSAS 18001 for occupational health and safety from Lloyd’s Register Quality Assurance.

UNPACKING YOUR APPLIANCE

WARNING

EXCESSIVE WEIGHT HAZARD

Use two or more people to move product.

Failure to do so can result in personal injury.

Remove Interior Packaging

Your appliance has been packed for shipment with all parts that could be damaged by movement securely fastened. Remove internal packing materials and any tape holding internal components in place. The owners manual is shipped inside the product in a plastic bag along with the warranty registration card, and other accessory items.

Important

Keep your carton and packaging until your appliance has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage in transit. Afterwards please dispose of all items responsibly.

Warranty Registration

It is important you send in your warranty registration card immediately after taking delivery of your appliance or you can register online at www.agamarvel.com.

The following information will be required when registering your appliance. Service Number Serial Number Date of Purchase Dealer’s name and address

The service number and serial number can be found on the serial plate which is located inside the cabinet on the left

side near the top. See gure 1.

Online registration

available at

www.agamarvel.com

WARNING

WARNING - Dispose of the plastic bags which can

be a suffocation hazard.

Note to Customer

This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the retailer upon acceptance of the shipment. Claims for loss or damage sustained in transit must be made to the retailer.

NOTE

DO NOT RETURN DAMAGED MERCHANDISE TO THE MANUFACTURER - FILE THE CLAIM WITH THE RETAILER.

CAUTION

XXXXXXXXXXXX

Figure 1

WARNING

WARNING - Help Prevent Tragedies

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous - even if they sit out for "just a few hours".

If you are getting rid of your old refrigerator, please follow the instructions below to help prevent accidents.

If the appliance was shipped, handled, or stored in other than an upright position for any period of time, allow the appliance to sit upright for a period of at least 24 hours before plugging in. This will assure oil returns to the compressor. Plugging the appliance in immediately may cause damage to internal parts.

Before you throw away your old refrigerator or freezer:

• Take off the doors or remove the drawers.

• Leave the shelves in place so children may not easily climb inside.

INSTALLING YOUR APPLIANCE

Select Location

The proper location will ensure peak performance of your appliance. We recommend a location where the unit will be out of direct sunlight and away from heat sources. To ensure your product performs to specications, the recommended installation location temperature range is from 55 to 100°F (13 to 38°C).

Cabinet Clearance

Ventilation is required from the bottom front of the appliance. Keep this area open and clear of any obstructions. Adjacent cabinets and counter top can be installed around the appliance as long as the front grille remains unobstructed. All Marvel Professional models with articulated hinges are intended for built-in applications only.

WARNING

An optional stacking kit is required to stack products. Failure to use a stacking kit could result in personal injury. Contact your dealer or Aga Marvel customer service at 800-223-3900 to order.

Front Grille, keep this area open.

Front Leveling Legs

Figure 2

Rear

Leveling

Legs

Leveling Legs

Adjustable legs at the front and rear corners of the appli-

ance should be set so the unit is rmly positioned on the oor and level from side to side and front to back. The over-

all height of your Marvel appliance may be adjusted higher (by turning the leveling leg out, CCW) and lower (by turning the leveling leg in, CW) dimensions as shown in Table "A".

To adjust the leveling legs, place the appliance on a solid

surface and protect the oor beneath the legs to avoid scratching the oor. With the assistance of another person,

lean the appliance back to access the front leveling legs. Raise or lower the legs to the required dimension by turning the legs. Repeat this process for the rear by tilting the appliance forward using caution. On a level surface check the appliance for levelness and adjust accordingly.

CAUTION

Front Grille

Do not obstruct the front grille. The openings within the

front grille allow air to ow through the condenser heat exchanger. Restrictions to this air ow will result in increased

energy usage and loss of cooling capacity. For this reason it is important this area to not be obstructed and the grille openings kept clean. AGA MARVEL does not recommend the use of a custom made grille as air ow may be restricted. (See Figure 2).

The front grille screws may be loosened and the grille adjusted to the desired height. When adjustment is complete tighten the two front grille screws. (See Figure 5).

Model Door Style

MP(15)(24)* (S) or (G)

MP(15)(24)* (F)

Minimum

Height

33 3⁄4"

(85.7 cm)

34"

(86.4 cm)

Table A

Maximum

Height

34 3⁄4"

(88.3 cm)

35"

(88.9 cm)

INSTALLING YOUR APPLIANCE

WARNING

Figure 3

Do not remove ground prong

Figure 4

Electrical Shock Hazard

• Do not use an extension cord with this appliance. They can be hazardous and can degrade product performance.

• This appliance should not, under any circumstances, be installed to an un-grounded electrical supply.

• Do not remove the grounding prong from the power cord. (See Figure 3).

• Do not use an adapter. (See Figure 4).

• Do not splash or spray water from a hose on the appliance. Doing so may cause an electrical shock, which may result in severe injury or death.

Electrical Connection

A grounded 115 volt, 15 amp dedicated circuit is required.

This product is factory equipped with a power supply cord that has a three-pronged, grounded plug. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances (see Figure 6). If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to provide the proper power supply. The third ground prong should not, under any circumstances, be cut or removed.

Figure 5

Front grille

Front grille screw

Figure 6

NOTE

Ground Fault Circuit Interrupters (GFCI) are prone to nuisance tripping which will cause the appliance to shut down. GFCI’s are generally not used on circuits with power equipment that must run unattended for long periods of time, unless required to meet local building codes and ordinances.

PRODUCT DIMENSIONS

ROUGH-IN OPENING DIMENSIONS CABINET DIMENSIONS

MODEL "A" "B" "C" "D" "E" "F" "G" "H" "J"

MP15BCG

MP15BCF

MP24**S

MP24**G

MP24**F

15"

(38.1 cm)

15"

(38.1 cm)

24"

(61 cm)

24"

(61 cm)

24"

(61 cm)

DOOR STYLE

(S) Solid Door (G) Glass Frame Door (F) Frame Glass Overlay Door (no handle)

**34" to 35"

(86.4 to 88.9 cm)

**341⁄4" to 351⁄4"

(87 to 89.5 cm)

**34" to 35"

(86.4 to 88.9 cm)

**34" to 35"

(86.4 to 88.9 cm)

**341⁄4" to 351⁄4"

(87 to 89.5 cm)

24"

(61 cm)

* 24"

(61 cm)

24"

(61 cm)

24"

(61 cm)

* 24"

(61 cm)

147⁄8"

(37.8 cm)

147⁄8"

(37.8 cm)

237⁄8"

(60.7 cm)

237⁄8"

(60.7 cm)

237⁄8"

(60.7 cm)

333⁄4" to 343⁄4"

(85.7 to 88.3 cm)

34" to 35"

(86.4 to 88.9 cm)

333⁄4" to 343⁄4"

(85.7 to 88.3 cm)

333⁄4" to 343⁄4"

(85.7 to 88.3 cm)

34" to 35"

(86.4 to 88.9 cm)

2323⁄32"

(60.2 cm)

227⁄8"

(58.1 cm)

2323⁄32"

(60.2 cm)

2323⁄32"

(60.2 cm)

227⁄8"

(58.1 cm)

267⁄32"

(66.6 cm)

267⁄32"

(66.6 cm)

267⁄32"

(66.6 cm)

3713⁄32"

(95 cm)

71⁄2"

(95.2 cm)

4613⁄32"

(117.9 cm)

4613⁄32"

(117.9 cm)

461⁄2"

(118.1 cm)

(44.3 cm)

(35.9 cm)

(67.2 cm)

(58.7 cm)

177⁄16"

141⁄8"

267⁄16"

231⁄8"

Figure 7a

Figure 8

"B"

"A"

Figure 7

(S) solid door

"C"

"E"

shown

"D"

If necessary to gain clearance inside the rough-in opening a hole can be cut through the adjacent cabinet and the power cord routed through this hole to a power outlet. Another way to increase the available opening depth is to recess the power outlet into the rear wall to gain the thickness of the power cord plug. Not all recessed outlet boxes will work for this application as they are too narrow, but a recessed outlet box equivalent to Arlington #DVFR1W is recommended for this application, (see Figure 8).

PRODUCT DATA

MODEL

MP15BCG 115V/60Hz/15A

MP15BCF 115V/60Hz/15A

MP24**S 115V/60Hz/15A

MP24**G 115V/60Hz/15A

MP24**F 115V/60Hz/15A

ELECTRICAL

REQUIREMENTS #

PRODUCT DIMENSIONS

PRODUCT

WEIGHT

105 lbs

(47.6 kg)

105 lbs

(47.6 kg)

140 lbs

(63.6 kg)

140 lbs

(63.6 kg)

140 lbs

(63.6 kg)

"J"

"H"

"G"

"D"

Figure 9

(S) solid door

shown

"E"

31⁄2" (8.9 cm)

Minimum

"F"

211⁄2"

(54.6 cm)

* To install (F) models with the door face ush with adjacent cabinetry doors, custom decorative panel thickness cannot exceed 3⁄4" (19 mm).

** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet.

# A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appliance.

USING YOUR ELECTRONIC CONTROL

Temp

Minus

keypad

On/Off

keypad

Temp

Plus

keypad

Display Area

Figure 10

Electronic control

Power Failure

ALARM RESET

Starting your appliance:

Plug the appliance power cord into a 115 volt wall outlet. Your appliance is shipped from the factory in the "On" position and will begin start-up of cooling as soon as power is

supplied. If the appliance does not start, conrm that the

wall outlet has power, and that the control is in the "On" position, (See "Turning your appliance On and Off" below).

The control display is covered with a clear plastic lm. This lm may be removed by carefully lifting the lm at a corner.

Lights keypad

(glass door

only)

Lock

keypad

System Status

indicators

The sleep mode can be disabled if you prefer to have the display on continuously. Press and hold the "Lock" keypad until the display goes past "Loc" and reads "nSL". To enable the sleep mode, repeat the instruction, again going past "Loc" until the display reads "SLP".

On initial power up, the control display will indicate a "Power Failure" alarm. This is a normal condition as the appliance was powered-up at the factory for quality inspection and then removed from power. A momentary press of the "On/Off" keypad will reset this alarm condition. (See Alarms section on page 10).

Sleep mode:

If no keypads are pressed for 60 seconds, the display will enter sleep mode to conserve power. The control panel will go dark with the exception of the system status "OK" indicator which will remain enabled. Alarm conditions will wake the display, (see alarms on page 10).

To make the following changes to the control settings (turning the appliance ON/OFF, adjusting the temperature, changing the interior lights, and activating vacation mode), the control must be awake.

To wake the display press any keypad. A conrm tone will

sound, and the current storage compartment temperature will be displayed.

Turning your appliance ON and OFF:

If the appliance is "On", (and out of sleep mode) the temperature will be shown in the display area of the control. To turn the appliance "Off", press and hold the "On/Off" keypad for 4-seconds. "OFF" will now be displayed on the control.

To turn the appliance "On", press and hold the "On/Off" keypad for 4-seconds.

Interior display lighting : (Glass door models only)

Your appliance is equipped with a dual light level display lighting feature. With the control out of sleep mode press the "Light" keypad once to activate the interior lighting

display feature at full illumination. A conrmation tone will

sound, and the light bulb "Icon" will illuminate. Pressing the "Light" keypad a 2nd time will dim the lighting to 50%. A 3rd press will deactivate the display lighting feature. The display lighting will automatically deactivate after 4-hours.

USING YOUR ELECTRONIC CONTROL

Adjusting the temperature:

To set or check the set-point temperature (with the control out of sleep mode), press the "-" or "+" keypads. "SET" will be indicated on the user interface panel and the current

set-point temperature will display and ash. Subsequent

presses of the "-" or "+" keypads will adjust the temperature colder or warmer respectively. When you have reached your desired set-point temperature, press the "On/Off" keypad to accept, or do nothing and the "Set" mode will timeout in 10-seconds accepting the displayed temperature as the new set-point.

The available set-point temperature range for your ap-

pliance is 34°F (1.2°C) to 42°F (5.7°C). If you attempt to

adjust the temperature outside of this range you will receive

an audible notication.

Temperature mode:

The temperature mode is preset from the factory in Fahrenheit (°F) but you have the option to change it to Centigrade (°C). To change the mode, press and hold the "-" keypad, while pressing the "+" keypad, then release the "-" keypad. The temperature will now be displayed in Centigrade (°C). Repeat the procedure to change the temperature mode back to Fahrenheit (°F).

When initially loading your product with warm contents, it may take up to 48-hours for the storage compartment temperature to stabilize.

When making temperature set-point changes, it may take up to 24-hours for the stored contents to stabilize at your new set-point temperature.

Factors that affect the storage compartment stabilized temperature:

• Changes to temperature setting.

• Room temperature changes.

• Temperature of stored contents.

- Loading warm contents.

- Cold content load will delay the change to a warmer set-point temperature.

- Warm content load will delay the change to a colder set-point temperature.

• Usage, (number and duration of the door openings).

• Use of the storage compartment display lighting, (glass door product only).

• Installation of the appliance in direct sunlight or next to a heat source.

Temperature Sensor Error Codes

Sensor Displayed Code Error Description Action to Take

Single Zone

Temperature Sensor

Defrost Sensor

Failed temperature sensor in the single

zone compartment. Can lead to unwant-

ed storage temperatures.

Failed defrost temperature sensor.

Causes unit to not defrost properly and

can create large frost build-up. Can lead

to water damage to the unit and sur-

Control lock:

The control panel can be locked to avoid unintentional changes. To lock the control, press and hold the "Lock" keypad until the display reads "Loc" then immediately release

your nger from the keypad. The lock icon will ash 3-times

and then continuously illuminate. When the control panel is locked, only the Lock keypad, System Status OK indicator , and the Alarm indicator are active. To un-lock the control panel, repeat this instruction until the display reads "nLc",

then immediately release your nger from the keypad.

NOTE

If the control lock is active (illuminated lock icon) the control will have to be unlocked before using the keypad to reset an alarm condition. See page 9 (Control Lock) for instructions for unlocking the control.

Temperature Sensor Error Codes

The temperature sensors are monitored continuously. Any OPEN or SHORTED circuit condition will initiate an ERROR CODE as listed below:

Call service to have the tem-

perature sensor replaced.

Unplug the power cord imme-

diately and call service to have

the defrost sensor replaced.

rounding oor.

USING YOUR ELECTRONIC CONTROL

Alarms:

The control will alert you to conditions that could adversely affect the performance of the appliance.

Door Ajar

ALARM RESET

• Door ajar - If the door is open, or not closed prop-

erly, for more than 5-minutes the System Status OK

indicator will turn-off, the "Door Ajar" indicator will ash,

and a tone will sound every 60 seconds. Additionally, an "ALARM RESET" indicator will be displayed below the "On/Off" keypad.

NOTE

The audible alarm can be muted, for each occurrence, by pressing the lock keypad.

Temp

ALARM RESET

• Temperature alarm - If the storage compart-

ment temperature deviates excessively from your set-point temperature for an extended period of time,

the "TEMP" indicator will ash, and an audible tone

will sound every 60 seconds. Additionally, an "ALARM RESET" indicator will be displayed below the "ON/ OFF" keypad.

NOTE

After a high temperature alarm condition, check all perishables to ensure they are safe for consumption.

This alarm condition can be reset by closing the door or momentarily pressing the "On/Off" keypad, (i.e.-if you are cleaning the storage compartment, etc.). The alarm will recur in 5-minutes if the alarm condition persists.

Power Failure

ALARM RESET

• Power failure - If power to the appliance is inter-

rupted the System Status indicator will turn-off and

the "Power Failure" indicator will ash. Additionally, an

"ALARM RESET" indicator will be displayed below the "On/Off" keypad. No audible tone will sound. This alarm condition can be reset by momentarily pressing the "On/Off" keypad. If this alarm occurs, it is recommended that you check the condition of any perishables, even if the appliance is operating normally and the temperature has recovered, as prolonged power outages could result in excessive temperature excursions which may spoil perishables.

NOTE

The temperature alarm may occur as a result of high usage or introduction of warm contents to the storage compartment. If the temperature alarm continues to occur, your unit may require service.

NOTE

The audible alarm can be muted, for each occurrence, by pressing the lock keypad.

This alarm condition can be reset by momentarily pressing the "On/Off" keypad. If this alarm occurs it is recommended that you check the condition of your stored contents, even though the appliance is operating normally and the temperature has recovered, as prolonged temperature excursions could spoil perishables.

Door Ajar

NOTE

Temp

Multiple alarms are possible, i.e.- "Door Ajar" for a prolonged period may trigger a "Temp" alarm, in which case both "Door Ajar" and "Temp" indicators will activate.

OVERLAY DOOR PANEL INSTALLATION

Vacation mode:

This operating mode can be used to save energy during high cost energy periods, or when you won't be using your appliance for an extended period of time by disabling the lights, alarm tones, and keypad entry tones. Vacation mode also serves as a Sabbath mode, disabling functions and its controls in accordance with the weekly Sabbath and religious holidays observed within the Orthodox Jewish community. When used as Sabbath mode, you may open or close the door at any time to access contents without concern of directly turning on or off any lights, digital readouts, solenoids, fans, valves, compressor, icons, tones, or alarms.

When activated, the display, alarm indicators and tones, keypad touch tones, interior lights, and all options are disabled. All keypad functions are disabled, with the exception of the "On/Off" keypad which is required to exit Vacationmode. Storage compartment temperatures are monitored and controlled at the settings prior to entering Vacation mode.

Overlay door panel installation:

If you purchased an overlay panel model, your unit is equipped with articulated hinges to allow fully integrated built-in installations. Custom panel thicknesses of 5⁄8" (15 mm) and 3⁄4" (18 mm) are accommodated.

CAUTION

It is important to use the factory provided grille that came

with the product to assure proper air ow is maintained

through the condenser. The use of a custom grille is not recommended and will void the warranty.

WARNING

Overlay panel models are designed for use with builtin installations only. Use in freestanding installations

could result in personal injury.

To enter Vacation Mode (with the control out of sleep mode), press and hold the "On/Off" keypad until the display

goes past "OFF" and reads "VAC". The display will ash

"VAC" 3-times to acknowledge your request, then will display "VAC" continuously until Vacation mode is exited. A power outage will not exit Vacation mode, exiting can only be accomplished manually. To exit Vacation mode and return to normal operation, press and hold the "On/Off" keypad until the control displays the temperature.

Step 1: Removing the Door

With a phillips screwdriver remove the screw and "P" clamp from the bottom of the door near the hinge. See Figure 11b.

Disconnect the door wire harness by pressing and holding down the locking tab on the wire connector and pulling the connector apart. See Figure 12.

Open the door and loosen the screws holding the hinges to the cabinet (2 at the top and 2 at the bottom hinge). Do not remove the screws but loosen them enough so the hinges can be slipped off of the screws when sliding the door to the side.

WARNING

The articulated hinges have many pinch points. Carefully close / collapse the hinges as soon as the door is removed from the cabinet.

With a helper, and being careful not to scratch the cabinet or the door, slide the door to the side about 1⁄2 inch and remove the hinges and door from the unit.

OVERLAY DOOR PANEL INSTALLATION

WARNING

Use extreme caution with the articulated hinges. The hinge is self closing and many pinch points exist prior to built-in installation. Do not remove the cabinet "Z"

bracket from the top of the cabinet.

Press and hold this down this tab on the wire connector and pull the connector apart.

Step 2: Remove the door gasket

With the door laying on a at surface and starting at a

corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 13. Set the gasket

aside on a at surface.

There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack along with the door lock, which is provided on certain models.

Loosen (do not remove ) these 2 phillips head screws on the top and bottom hinges

Figure 11a

Cabinet "Z" Bracket

Figure 12

Holes in

gasket

retainer.

Figure 13a

Overlay panel

ush with top

and side of

door.

Overlay panel to be centered on width of door.

Figure 11

"P" clamp and screw

Figure 11b

Bottom of

door

Wire connector see Figure 12

Magnetic Gasket remove starting at a corner, grasp and pull away from the door.

Figure 13

Step 3: Cut and drill the overlay panel

Depending on your model cut the overlay door panel to the dimensions shown in Figures 14 to 21. The window cut out is for glass door models only. If your appliance has a lock also drill the lock hole in the panel, see Figure 22.

Clearance for

screw head,

4 places

OVERLAY DOOR PANEL INSTALLATION

CAUTION

Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.

Clearance for hinge 2 places

Top of door

Clearance

for hinge

2 places

1" (25.4 mm) diameter counter bore 1⁄4" (6.4mm) deep 4 places.

327⁄32"

(9.7 cm)

31⁄8"

(7.9 cm)

Minimum

15⁄32"

(2.9 cm)

41⁄8"

(10.5 cm)

Minimum

Hinge side of door

Left Hand Hinged Door

Figure 14

15" (38.1 cm) wide appliance

143⁄4"

(37.5 cm)

(12.7 cm)

13⁄16"

(3 cm)

⁄4" (6 mm)

radius is permissible

This side facing interior

47⁄8"

(12.4 cm)

⁄4" (6 mm)

31⁄8"

(7.9 cm)

31⁄8"

(7.9 cm)

Minimum

(4.4 cm)

Deep

13⁄4"

3011⁄32"

(77.1 cm)

Figure 16

Right Hand Hinged Door

15" (38.1 cm) wide appliance

⁄4" (6 mm)

13⁄4"

(4.4 cm)

3011⁄32"

(77.1 cm)

Deep

(12.4 cm)

31⁄8"

(7.9 cm)

31⁄8"

(7.9 cm)

Minimum

143⁄4"

(37.5 cm)

47⁄8"

(12.7 cm)

⁄4" (6 mm)

radius is permissible

This side facing interior

13⁄16"

(3 cm)

Hinge side of door

Clearance for

screw head,

4 places

1" (25.4 mm) diameter counter bore 1⁄4" (6 mm) deep 6 places.

327⁄32"

(9.7 cm)

31⁄8"

(7.9 cm)

Minimum

15⁄32"

(2.9 cm)

11⁄2"

111⁄16"

(4.3 cm)

(3.8 cm)

typical

Figure 15

Left Hand Hinged Door

15" (38.1 cm) Wide Appliance

311⁄16"

(9.4 cm)

(5.1 cm)

311⁄16"

(9.4 cm)

11⁄2"

(3.8 cm)

typical

111⁄16"

(4.3 cm)

Figure 17

Right Hand Hinged Door

15" (38.1 cm) wide appliance

41⁄8" (10.5 cm) Minimum

OVERLAY DOOR PANEL INSTALLATION

Clearance for

screw head,

4 places

Top of door

24" (61 cm) wide appliance

233⁄4"

(60.3 cm)

Clearance for hinge at top and bottom

Hinge side of door

Figure 18

Left Hand Hinged Door

⁄4"

(6 mm)

Deep

Clearance

for hinge

Top of door

at top and

bottom

Hinge side of door

Figure 20

Right Hand Hinged Door

24" (61 cm) wide appliance

233⁄4"

⁄4"

(6 mm)

Deep

(60.3 cm)

Clearance for screw head, 4 places

31⁄8"

(7.9 cm)

15⁄32"

(2.9 cm)

111⁄16"

(4.3 cm)

11⁄2"

(3.8 cm)

typical

47⁄8"

(12.4 cm)

14"

(35.6 cm)

13⁄16"

(3 cm)

327⁄32"

(9.8 cm)

⁄4" (6 mm)

radius is permissible

31⁄8"

(7.9 cm)

This side to door

41⁄8"

(10.5 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places

Figure 19

Left Hand Hinged Door

24" (61 cm) wide appliance

(4.4 cm)

31⁄8"

(7.9 cm)

311⁄16"

(9.4 cm)

13⁄4"

(5.1 cm)

3011⁄32"

(77.1 cm)

(4.4 cm)

31⁄8"

(7.9 cm)

3011⁄32"

(77.1 cm)

(5.1 cm)

13⁄4"

14"

(35.6 cm)

31⁄8"

(7.9 cm)

13⁄16"

(3 cm)

⁄4" (6 mm)

radius is permissible

This side to door

311⁄16"

(9.4 cm)

1" (2.5 cm) diameter

x 1⁄4" (6 mm) deep

Figure 21

Right Hand Hinged Door

24" (61 cm) wide appliance

327⁄32"

(9.8 cm)

41⁄8"

(10.5 cm)

4 places

47⁄8"

(12.4 cm)

31⁄8"

(7.9 cm)

15⁄32"

(2.9 cm)

111⁄16"

(4.3 cm)

11⁄2"

(3.8 cm)

typical

CAUTION

OVERLAY DOOR PANEL INSTALLATION

Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.

Material Type #10 Wood Screw

Hardwood

Softwood

⁄8" (3.2 mm) Diameter. Pilot Hole

⁄64 (2.8 mm) Diameter. Pilot Hole

Table B

Step 4: Assemble the panel to the door

The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be

ush with the top of the door and centered along the width

of the door. See Figure 13a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "B", being careful not to drill through the front surface of the panel. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

#10 x 1⁄2"

screw

⁄32"

(13.7 mm)

Counter bore lock hole on back side.

Figure 22a

31⁄2"

(89 mm)

⁄2" (13 mm) diameter drill

through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.

Hinge side of door

Figure 22

OVERLAY DOOR PANEL INSTALLATION

Step 5: Assemble lock parts

Two (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock exten- sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 23 and 24.

Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.

BRASS EXTENSION

SPRING WASHER

NUT

LOCK

1/2 HOLE

13/16 COUNTER

BORE 7/16 DEEP

CAM

PHILLIPS SCREW

Step 7: Install the door

Carefully open the top and bottom hinges on the door being careful as there are many pinch points. Place the hinges over the 4 screws in the cabinet, 2 at the top and 2 at the bottom and slide the door into position. Tighten the 4 hinge screws with a phillips screwdriver. (See Figures 11 and 11a). Place wire harness from the grille and mount to the bottom of the door with the screw and "P" clamp removed in step 1. (See Figure 11b). Reconnect the wire harness, (See Figure 12).

Step 8: Secure the cabinet

Use the #8 x 3⁄4" black screws from the literature pack to secure the counter top to the cabinet top through the holes in the cabinet "Z" bracket.

INNER

3/4 INCH WOOD PANEL

SECTION A-A

SCALE 1 : 1

DOOR

Figure 23

Step 6: Install lock cam

Attach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam vertically when installing on the lock.

Screw

Brass extension (2 lengths provided)

Key

Retainer nut

Spring washer

Lock

Cam

Cam stop washer

Figure 24

Set screw

Cabinet "Z" bracket

#8 x 3⁄4" black screws (3 places)

Figure 25

SHELVING CONFIGURATIONS

Loading Tips and Suggestions

Your appliance is equipped with a cantilever shelf system which provides maximum adjust ability and customizing of the shelving arrangements listed below.

Figure 26

Beverage Center: 15" (38.1 cm) Wide Models:

Shown with a glass door. Figure 26.

(2) frame and at glass shelf. (See Figure 30).

Figure 28

Refrigerator: 24" (61 cm) Wide Models:

Shown with a solid door with door racks. Figure 28.

(1) half width metal cantilever shelf (See Figure 34). (1) full width slide out cantilever metal shelf. (See Figure 33).

(1) frame and at glass crisper cover.

(1) roll-out crisper pan. (1) full width door storage rack. (1) half width door storage rack.

Figure 27

Beverage Center: 24" (61 cm) Wide Models:

Shown with a glass overlay door. Figure 27.

(2) wine cutout and at glass cantilever shelf.

(See Figure 31). (1) Five bottle rollout display rack with vibration dampening mat (See Figure 32).

Figure 29

Beverage Refrigerator: 24" (61 cm) Wide Models:

Shown with a glass door. Figure 29.

(1) half width at glass cantilever shelf. (See Figure 30). (1) wine cutout and at glass cantilever shelf.

(See Figure 31).

(1) frame and at glass crisper cover.

(1) roll-out crisper pan

SHELVING CONFIGURATIONS

Wine shelf underneath glass

Wine cutout and at glass shelf with

vibration dampening mat, the glass

can be removed for wine storage.

Figure 30

Frame and at glass shelf

with trim

Figure 31

Figure 33

Slide out metal cantilever shelf

Figure 34

half width metal cantilever

shelf

Tall bottle storage area

Figure 32

5 bottle rollout display

rack with vibration

dampening mat

Door storage racks

Figure 35

To remove the crisper :

Pull out until it stops. Lift up on the front of the pan, and remove it from the frame.

SHELVING CONFIGURATIONS

CAUTION

Make sure your cantilever shelf is secure on the shelf supports by pressing down on the shelf before loading the shelf.

Shelf support slot

Installed shelf tang

Rear tang (hook) on shelf

To Add or Remove a Shelf

Remove stored product from the shelf. Do not try to remove a loaded shelf from the appliance. Grasp the shelf front with both hands, rotate the front upward and lift out. (See Figure 36b). To install a shelf insert the shelf in the appliance and insert the top hooks into the shelf support slots and drop the shelf down so the hooks drop over the bottom of the slots.

Figure 36a

Tall bottle storage area

Figure 36

Grasp the shelf by the front with

Figure 36b

both hands and rotate the front

of the shelf up, then lift the shelf

up and remove the shelf from the

shelf ladders.

CAUTION

Never try to move a loaded shelf, remove everything from the shelf before moving. Use both hands when moving a shelf.

CARE AND CLEANING AND ENERGY SAVING TIPS

Front Grille

Be sure that nothing obstructs the required air ow openings in front of the cabinet. At least once or twice a year, brush or vacuum lint and dirt from the front grille area (see page 4).

CAUTION

SHOCK HAZARD: Disconnect electrical power from the appliance before cleaning with soap and water.

Cabinet

The painted cabinet can be washed with either a mild soap and water and thoroughly rinsed with clear water. NEVER use abrasive scouring cleaners.

Interior

Wash interior compartment with mild soap and water. Do NOT use an abrasive cleaner, solvent, polish cleaner or undiluted detergent.

Care of Appliance

1. Avoid leaning on the door, you may bend the door hinges or tip the appliance.

2. Exercise caution when sweeping, vacuuming or mopping near the front of the appliance. Damage to the grille can occur.

3. Periodically clean the interior of the appliance as needed.

4. Periodically check and/or clean the front grille as needed.

In the Event of a Power Failure

If a power failure occurs, try to correct it as soon as possible. Minimize the number of door openings while the power is off so as not to adversely affect the appliance's temperature.

The following suggestions will minimize the cost of operating your refrigeration appliance.

1. Do not install your appliance next to a hot appliance (cooker, dishwasher, etc.), heating air duct, or other heat sources.

2. Install product out of direct sunlight.

3. Ensure the front grille vents at front of appliance beneath door are not obstructed and kept clean to allow ventilation for the refrigeration system to expel heat.

4. Plug your appliance into a dedicated power circuit. (Not shared with other appliances).

5. When initially loading your new product, or whenever large quantities of warm contents are placed within refrigerated storage compartment, minimize door openings for the next 12 hours to allow contents to pull down to compartment set temperature.

6. Maintaining a relatively full storage compartment will require less appliance run time than an empty compartment.

7. Ensure door closing is not obstructed by contents stored in your appliance.

8. Allow hot items to reach room temperature before placing in product.

9. Minimize door openings and duration of door openings.

10. Use the warmest temperature control set temperature that meets your personal preference and provides the proper storage for your stored contents.

11. When on vacation or away from home for extended pe-

riods, set the appliance to warmest acceptable tem perature for the stored contents.

12. Set the control to the “off” position if cleaning the

appliance requires the door to be open for an extended period of time.

13. For wine storage products:

When serving temperatures are not required, return the compartment(s) set temperature to the ideal red and white wine long term storage tem perature of 13°C / 55°F.

Light assembly replacement

All models use an LED to illuminate the interior of the appliance. This component is very reliable, but should it fail,

contact a qualied service technician for replacement of the

LED.

OBTAINING SERVICE

If Service is Required:

• If the product is within the rst year warranty period please contact your dealer or call AGA MARVEL Customer Service at 800.223.3900 for directions on how to obtain warranty coverage in your area.

• If the product is outside the rst year warranty period, AGA MARVEL Customer Service can provide recommendations of service centers in your area. A listing of authorized service centers is also available at www. agamarvel.com under the service and support section.

• In all correspondence regarding service, be sure to give the service number, serial number, and proof of purchase.

• Try to have information or description of nature of the problem, how long the appliance has been running, the room temperature, and any additional information that may be helpful in quickly solving the problem.

• Table "C" is provided for recording pertinent information regarding your product for future reference.

For Your Records

Date of Purchase

Dealer’s name Dealer’s Address Dealer’s City Dealer’s State Dealer’s Zip Code Appliance Serial Number Appliance Service Number Date Warranty Card Sent (Must

be within 10 days of purchase).

Table C

TROUBLESHOOTING

Before You Call for Service

If the appliance appears to be malfunctioning, read through this manual rst. If the problem persists, check the troubleshooting guide below. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem may be something very simple that can be solved without a service call. However, it may be required

to contact your dealer or a qualied service technician.

WARNING

Electrocution Hazard

• Never attempt to repair or perform maintenance on the appliance until the main electrical power has been disconnected. Turning the appliance control "OFF" does not remove electrical power from the units wiring.

• Replace all parts and panels before operating.

CAUTION

In the unlikely event you lose cooling in your unit, do not unplug the product from the electric supply, but do call

a qualied service technician immediately. It is possible

that the loss of cooling capacity is a result of excessive frost build-up on the evaporator cooling coil. In this case, removing power to the unit will result in the melting of this excessive quantity of ice, which could generate melt water that exceeds the capacity of the defrost drain system and could result in water damage to your home. The end-user will be ultimately responsible for any water damage caused by prematurely turning the unit off without appropriately managing the excess water run-off.

Problem Possible Cause Remedy

Appliance not cold enough

(See “Adjusting the temperature" on page 9)

Appliance too cold

(See “Adjusting the Temperature” on page 9)

No interior light. • Failed LED light assembly or light

Light will not go out when door is closed

Noise or Vibration • Appliance not level

Appliance will not run. • Appliance turned off

• Control set too warm

• Content temperature not stabilized.

• Excessive usage or prolonged door openings.

• Airow to front grille blocked.

• Door gasket not sealing properly.

• Control set too cold

• Door gasket not sealing properly.

switch.

• Display light is turned on. (Glass door models only.

• Door not activating light switch.

• Failed light switch

• Fan hitting tube obstruction.

• Power cord not plugged in.

• No power at outlet.

• Adjust temperature colder. Allow 24 hours for temperature to stabilize.

• Allow temperature to stabilize for at least 24 hours.

• Airow must not be obstructed to front grille. See “clearances” on

page 4.

• Check door alignment and/or replace door gasket.

• Adjust temperature warmer.

Allow 24 hours for temperature to stabilize.

• Check door alignment and/or replace door gasket.

• Contact a qualied service technician.

• Turn off display light, shut door.

• Appliance not level, level appliance, (See page 4, “leveling legs”)

• Contact a qualied service technician.

• Level appliance, see “Leveling Legs” on page 4.

• Contact a qualied service technician.

• Turn appliance on. See “Starting your appliance” on page 8.

• Plug in power cord.

• Check house circuit.

HOUSEHOLD PRODUCT WARRANTY

Entire Product Limited One Year Parts and Labor Warranty

AGA MARVEL warrants that it will supply all necessary parts and labor to repair or replace in the end user’s home

or ofce, any component which proves to be defective

in material or workmanship, subject to the condition and exclusions stated below, for a period of one year from the date of purchase by the end user.

Additional Second Through Fifth Year Limited Parts Only Warranty

During the four years following expiration of the one year limited warranty, AGA MARVEL will supply replacement parts for the hermetically sealed refrigeration system which consists of the compressor, condenser, drier, accumulator, bypass valve, connecting tubing and the evaporator that are proven to be defective due to workmanship or materials subject to the conditions and exclusions below.

The above warranties do not cover:

• Shipping costs of replacement parts or returned defective parts.

• Customer education or instructions on how to use the appliance.

• Any content loss due to product failure.

• Removal or installation of product.

Nor do the above warranties cover failure of this product or its components due to:

• Transportation or subsequent damages.

• Commercial use or use other than normal household or

small ofce.

• Improper installation, misuse, abuse, accident or alteration, use of wiring not conforming to electrical codes, low or high voltages, failure to provide necessary maintenance, or other unreasonable use.

Parts or Service Not Supplied or Designated by AGA MARVEL

The above warranties also do not apply if:

• The original bill of sale, deliver date, or serial number

cannot be veried.

• Defective parts are not returned for inspection if so requested by AGA MARVEL.

• The refrigeration equipment is not in the possession of the original end use purchaser.

The warranties set forth herein are the only warranties extended by AGA MARVEL. Any implied warranties, including the implied warranty of merchantability, are limited to the duration of these express warranties. In no event shall AGA MARVEL be liable for any consequential or incidental damages or expenses resulting from breach of these or any other warranties, whether express or implied.

Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts, so the above exclusion or limitation may not

apply to you. This warranty gives you specic legal rights

and you may have other rights that may vary from state to state.

No person, rm, or corporation is authorized to make any

other warranty or assume any other obligation for AGA MARVEL. These warranties apply only to products used in

any of the fty states of the United States and the District of

Columbia.

To obtain performance of this warranty, report any defects to:

1260 E. VanDeinse St. Greenville MI 48838

Phone: 800.223.3900

+ 53 hidden pages