Page 1
RUSH BATTEN 1 HEX
User Manual
Page 2
© 2017 HARMAN® Professional Denmark ApS. Information subject to change without notice.
HARMAN® Professional Denmark and all affiliated companies disclaim liability for any injury,
damage, direct or indirect loss, consequential or economic loss or any other loss occasioned
by the use of, inability to use or reliance on the information contained in this manual. Martin®,
RUSH®, HARMAN® and all other trademarks in this document pertaining to services or
products by Martin Professional™ or its affiliates and subsidiaries are registered as the
Martin Professional • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • www.martin.com
property of HARMAN® Professional Denmark..
Manual: Revision B
Page 3
Table of contents
Safety information..............................................................................................4
Introduction ........................................................................................................8
Before using the product for the first time ......................................................8
Physical installation ...........................................................................................9
Standing the fixture on the floor .....................................................................9
Fastening the fixture to a flat surface .............................................................9
Mounting the fixture on a truss.......................................................................9
AC power .........................................................................................................11
Linking fixtures to power in a chain..............................................................11
Fixture overview...............................................................................................13
Control data link...............................................................................................14
Tips for reliable data transmission ...............................................................14
Connecting the data link...............................................................................15
Fixture setup ....................................................................................................16
Using the control menus ..............................................................................16
Setting DMX address ...................................................................................16
Setting DMX mode and Master-Slave..........................................................17
Fixture settings.............................................................................................17
Fixture information........................................................................................19
Setting options by RDM ...................................................................................19
Scanning for RDM devices on the data link.................................................20
Getting status and setting options by RDM..................................................20
RDM functions..............................................................................................20
Effects ..............................................................................................................23
Dimming .......................................................................................................23
Strobe effects ...............................................................................................23
Color.............................................................................................................23
Maintenance ....................................................................................................24
Cleaning .......................................................................................................24
Replacing the primary fuse ..........................................................................25
Updating firmware ........................................................................................25
Service and repairs ......................................................................................25
DMX protocol ...................................................................................................26
Control menus..................................................................................................32
Troubleshooting ...............................................................................................33
Specifications...................................................................................................35
Page 4
Safety information
WARNING!
Read the safety precautions in this manual before
The following symbols are used to identify important safety information on the
product and in this manual:
installing, operating or servicing this product.
Warning!
Safety
hazard. Risk
of severe
injury or
death.
Warning!
Powerful
light
emission.
Risk of eye
injury.
Warning!
See user
manual for
important
safety
information.
Warning!
Hazardous
voltage.
Risk of
lethal or
severe
electric
shock.
Warning!
Hot
surfaces.
Warning!
Fire hazard.
Warning! Risk Group 1 product according to EN 62471. Do not
stare at operating lamp and do not view the light output with
optical instruments or any device that may concentrate the
beam.
This lighting fixture is for professional use only and must be
installed by a qualified technician. It is not for household use. It
presents risks of severe injury or death due to fire hazards,
electric shock and falls. It produces a powerful, concentrated
beam of light that can create a fire hazard or a risk of eye injury
if the safety precautions below are not followed.
Install, operate and service Martin™ products only as directed
in their user manuals, or you may create a safety hazard or
cause damage that is not covered by product warranties.
Follow the safety precautions listed below and observe all
warnings in this manual and printed on the product. Keep this
user manual for future use.
For the latest user documentation and other information for this
and all Martin™ products, please visit the Martin website at
http://www.m
artin.com
4 RUSH BATTEN 1 User Manual
Loading...