Martin Pro MAC Viper Performance User Manual
MAC Viper Performance
The MAC Viper Performance is a full-
feature framing fixture that
delivers an output and performance never before seen in a fixture
this size or one using so little power. Unlike other fixtures in this
class, the MAC Viper Performance does not forgo an iris or animation
wheel – they are both included along with a framing system and
rotating gobos.
The framing system consists of four shutter blades that can all
individually adjust +/- 30° while the entire system can rotate +/
55°. The exacting system can repeat each cue with great precision.
When fully focused, gobos can be nicely framed with a soft edge. The
MAC Viper Performance has adopted the compact form, impressive
speed, superior light quality and beautiful colors that the MAC Viper
Profile is renowned for and uses the same 1000-
watt lamp.
26000 Lumens – Excellent light quality with a very flat and uniform field and
6000K color temperature
1:4 zoom – Fast zoom with auto-linked focus
Four shutter blades individually adjust +/- 30° while the entire system rotates +/55°. Repeats cues with great precision
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
•
26000 Lumens – Excellent light quality with a very flat and uniform field
and 6000K color temperature
•
1:4 zoom – Fast zoom with auto-linked focus
•
Four shutter blades individually adjust +/- 30° while the entire system
rotates +/- 55°. Repeats cues with great precision
•
Large aperture front lens – The 140 mm front lens exceeds the size of
any other fixture in this segment for just the right fat beam look
•
5 rotating gobos – All glass gobos with only a slight focal separation to
the framing system
•
Animation wheel with continuous bi-directional rotation
•
CMY – Vibrant color mixing with a superior palette of colors including true
reds, rich ambers, primary green and deep blues
•7-slot color wheel – Static colors and correction filters for added color
choice and bump effects
•
Linear CTO – Daylight to tungsten CCT control and expansion of the CMY
palette
•
Dimmer and shutter
- Combined dimmer/shutter system with intensity
effects, instant blackout/open and smooth fades
•
Iris – Fast and tight iris with adjustable dynamic effects
•
Strobe – Diverse strobe effects using mechanical or electronic control or
in combination
•
Soft frost – A light frost leaves gobo artwork visible with a beautiful soft
edge. Includes a linear focus blurring option
•4-facet prism – Real beam separation with rotation and index control for
dynamic effects and accurate tiling
Length (base): 472 mm (18.6 in.)
Length (head): 566 mm (21.6 in.)
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice
Dynamic Effects
Control and Programming
Lamp
Optics
Service Utilities
Construction
Gobos
Installation
Connections
Electrical
Typical Power and Current
Thermal
Width: 472 mm (18.6 in.)
Width (base): 335 mm (13.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Height (maximum): 748 mm (29.4 in.)
Weight: 37.9 kg (83.6 lbs.)
Minimum center-to-center distance in side-by-side installation: 650 mm (25.6 in.)
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: CTO, variable 6000 - 3200 K
Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation,
random color
Aerial wheel: 5 interchangeable texture/breakup gobos + open, indexing, continuous
rotation and shake
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with
variable speed and direction
Framing: Rotatable framing module, +/- 55°, with 4 individually controllable blades
Prism: Interchangeable 4-facet rotating prism
Iris: 0 - 100%
Frost: Variable
Mechanical dimmer/shutter: 0 - 100% continuous dimming, variable & random strobe &
pulse effects, instant open & blackout
Dimming options: Choice of four dimming curves
Focus: Range varies with zoom angle, from 2 m / 6 m to infinity (approx.)
Zoom-focus linking system: 3-zone
Zoom: Motorized
Pan: 540°
Tilt:
268°
Position correction system: Absolute position monitoring
DMX channels: 32/40
Setting and addressing: Control panel with backlit graphic display and jog wheel or
via DMX
16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Receiver: Opto-isolated RS-485
Firmware update: USB memory device or USB/DMX hardware interface over DMX link
Type: 1000 W short-arc discharge
Color temperature: 6000 K
CRI (Color rendering index): >85
Average lifetime: 750 hours
Socket: PGJX36
Ballast: Electronic
Approved lamps: Osram Lok-it! 1000/PS Brilliant, Philips MSR Gold MiniFastFit 1000W
Zoom range: 10-44° (1:4)
Output: 26 000 lm
Fixture identification: User-settable fixture ID number
Color(s): Black
Housing: UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20
Size: E27 (Size E, max. image diameter 27 mm)
Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum
coating (metal gobos not approved)
Outside diameter: 37.5 mm +0/- 0.2 mm (1.5 +0/- 0.01 in.)
Maximum image diameter: 27 mm (1.1 in.)
Maximum thickness:
1.1 mm +/- 0.1 mm (0.1 in. +/- 0.01 in.)
Mounting points: Eight quarter-turn locking points
Orientation: Any
Minimum distance to illuminated surfaces: 3.4 m (11.2 ft.)
Minimum distance to combustible materials: 0.3 m (1.0 ft.)
AC power input: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR
USB memory devices: USB host socket
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 16.2 A
120 V, 60 Hz: 1225 W, 10.3 A, PF 0.999
208 V, 60 Hz: 1190 W, 5.8 A, PF 0.996
230 V, 50 Hz: 1186 W, 5.2 A, PF 0.994
240 V, 50 Hz: 1194 W, 5.0 A, PF 0.993
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
PF = power factor:
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...