Martin Pro JEM Hazer Pro User Manual
G A L L E R Y
JEM Hazer Pro
The JEM Hazer Pro is a top of the range water-
based haze machine
designed for the highly demanding professional market. Its ability to
produce exceptionally fine atmospheric haze in a short period of time
while operating at low noise levels makes it an ideal choice for rental
houses, medium to large shows, theatres, studios, clubs, bars, cruise
ships, theme parks and more.
Robust yet small and lightweight, the JEM Hazer Pro™ is capable of
dispersing an even, continuous haze with superior optical clarity and
reflectivity, the perfect small-particle haze for highlighting today’s
highly defined light beams. The highly efficent JEM C-
Plus Haze fluid
was developed for the JEM Hazer Pro and a full reservoir can yield up
to 65 hours of run time before refilling is neccessary.
The JEM Hazer Pro features a patented battery-powered automatic
shutdown system that purges the trackless heat exchanger system,
thus preventing clogging, reducing maintenance and extending
product life. Robust control options allow the machine to be
controlled independently, remotely or with DMX featuring RDM
compatability.
Finest haze production in its class
Programmable fast access control keys
Actors' Equity/Broadway League Approved.
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Performance
•
Continuous effect output.
•
Water-based fluid provides dense particles and even haze.
•
Sealed fluid system with quick-connect fittings.
•
2.5 liter fluid reservoir
- 10.5 hours on full output.
•
User-friendly on-board digital control panel.
•
Pre-
programmed "silent" mode.
•
Independent variable haze and fan control.
•
DMX Control with RDM Standard.
•
Road
-worthy industrial design.
•
Lightweight and small footprint.
•
Optional Flying Kit and Digital Remote Control.
•
Battery powered automatic shutdown system - prevents clogging.
Length: 565 mm (22.3 in.)
Width: 271 mm (10.7 in.)
Height: 298 mm (11.8 in.)
Height with rigging kit: 294 mm (11.6 in.)
Dry weight: 15 kg (33.1 lbs.)
Filled weight: 17.5 kg (38.6 lbs.)
Coverage volume: 5500 m3 (194,231 ft3) per minute
Operating time with 2.5 l fluid (minimum/maximum): 10.5/65 hours
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Control and Programming
Construction
Installation
Connections
Electrical
Thermal
Approvals
Included Items
Accessories
Ordering Information
Operating time: Continuous
Ready time: 6 minutes
Ambient noise: Silent mode
Control options: Digital control panel, programmable fast access keys, DMX, optional
digital remote control, master/slave link mode
Control parameters: Continuous or timer-controlled output
Haze and fan: Independent variable output, 0-100%
DMX channels: 3 (Haze, Fan, Control)
Self cleaning cycle: Battery powered automatic shutdown, manually engaged, or DMX
DMX compliance: ANSI E1.11 - USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM
Housing: Steel and aluminum
Color: Black
Heat exchanger: 600 W trackless heat exchanger, thermally protected
Blower fan: Integrated, 200-2500 RPM
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
Mounting: Standing or optional flying kit
Orientation: Up to +/- 30° from horizontal
Clearance around machine: 100 mm (4.0 in.)
AC power: Neutrik PowerCon
DMX, link mode in/out: 3-pin and 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
EU Model
AC power: 220-240 V, 50/60 Hz
Main fuse: 6.3 AT (slow blow), 250 V
Typical power and current: 675 W, 3.1 A*
US Model
AC power: 100-130 V, 50/60 Hz
Main fuse: 10 AT (slow blow), 125 V
Typical power and current: 675 W, 6 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min): 5° C (41° F)
Exterior surface temperature, steady state: 30° C (86° F)
Maximum nozzle temperature: 290° C (554° F)
EU EMC: EN 61000-6-3:2001
EU safety: EN 60 335-1+A15, EN 62233
EU Immunity: EN 61000-6-1
US safety (pending): UL 998
Canadian Safety (pending): CSA C22.2 No. 104-01
Australia/NZ: C-Tick N4241
Calibration factors have been developed and approved by the Actors’ Equity Association
and the Broadway League for use in measuring theatrical haze with the JEM™
Hazer Pro
and JEM™ C-Plus Haze Fluid:
Fluid reservoir 2.5 l: P/N 34300521
Power input cable, EU, powerCON, stripped ends, 2.5 m (8.2 ft.): P/N 11501041
Power input cable, US, powerCON, molded NEMA 5-15P, 2.5 m (8.2 ft.): P/N 11501042
JEM™ Hazer Pro Digital Remote Control: P/N 92765042
JEM™ Hazer Pro Flying Kit: P/N 92610002
Service Tools
Epsilon 5 AVR Programmer: P/N 50502004
Temperature Calibration Box: P/N 92620005
Approved fluids
JEM™ C-Plus Haze Fluid
JEM™ Pro Clean Supreme
*Contact your dealer or see 'Fluids' product pages for details
JEM™ Hazer Pro, US: P/N 92225945
JEM™ Hazer Pro, EU: P/N 92225940
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...