
Martin IP66 PSU 240W
The Martin™ IP66 PSU 240W is an IP66-rated external power supply
unit that can supply 48 VDC power to various Martin™ lighting and
LED Video products, including the Exterior PixLine, Exterior Dot-
HP
and VC-Dot.
It provides an alternative to the P3 PowerPort in supplying power to
fixtures in a DMX-controlled system.
Rugged extruded aluminum housing
Auto-
ranging 100
-240 VAC power input
Full protection with auto-recovery
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
System integration
Construction
Installation
Connections
Can be located up to 50 m (164 ft.) away from the creative LED video
products
No configuration or addressing required
Length: 314 mm (12.4 in.)
Width: 68 mm (2.7 in.)
Height: 39 mm (1.5 in.)
Weight: 1.5 kg (3.3 lbs.)
Exterior PixLine™ family
Exterior Dot-HPTM family
VDO Sceptron™ family
VC-Dot™ family via VC-Feeder™
VC-Grid™ family (indoor product)
VC-Strip™ family (indoor product)
Tripix family
Housing: Aluminum
Finish: Clear anodized
Protection rating: IP66, NEMA 4X
RoHS compliant
Mounting: Fixation points for surface-mounting
Orientation: Any
Max. cable length: See connected product user manuals
Max. number of connected fixtures: See connected product user manuals
Hard-wired (terminal block) via cable gland
To Tripix: Power Inserter Cable, Martin™ IP66 PSU 240 W to Tripix system, 0.25 m (9.8
in.), P/N 91611339
To VDO Sceptron: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8
in.), P/N 91616050
To Exterior PixLine: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m
(9.8 in.), P/N 91616050
To Exterior Dot-HP: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m
(9.8 in.), P/N 91616050
To VC-Grid:
Input Y-Cable, XLR5 + Martin™ IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N
91616039
To VC-Strip: Input Y-Cable, XLR5 + Martin™ IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Electrical
Thermal
Approvals
Accessories
Ordering Information
91616039
To VC-Feeder (VC-Dot): Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to IP65
connector, 0.25 m (9.8 in.), P/N 11840195
See user manuals of compatible products for latest complete information on suitable
cables and connectors, safety limits, etc.
AC power input: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-sensing multi-voltage switch-mode
DC power output: 48 V
Maximum DC output power: 240 W
Maximum DC output current draw: 5 A
Protection: Overvoltage, overcurrent, short circuit, over-temperature, all with auto
Cooling: Convection
Maximum ambient temperature (Ta max.): 45° C (113° F)
Minimum ambient temperature (Ta min.): -30° C (-22° F)
Maximum surface temperature, steady state, Ta=45° C (113° F): 80° C (176° F)
Total heat dissipation (calculated, including max. number of connected devices, all at
full load): 820 BTU/hr.
EU safety: EN 60598-2-6, EN 61347-2-13
EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1012
Canadian safety: CSA C22.2 No. 107.1
Australia/NZ: RCM
Power Inserter Cable, Martin™ IP66 PSU 240 W to Tripix™ system: P/N 91611339
Input Y-Cable, 5-pin XLR + Martin™ IP66 PSU 240W to BBD, 0.25m (9.8 in.): P/N
91616050
Input Y-Cable, 5-pin male XLR + Martin™ IP66 PSU 240W to 4-pin fem. XLR, 0.25 m
(9.8 in.):
P/N 91616039
Input Y-Cable, 5-pin male XLR + Martin™ IP66 PSU 240W to IP65, 0.25 m (9.8 in.): P/N
11840195
Martin™ IP66 PSU 240 W (replaces Tripix™ Power IP66): P/N 90760330
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice