Martin Pro Exterior PixLine 10 User Manual



G A L L E R Y

Exterior PixLine 10

The Exterior PixLine 10 is a linear LED video fixture for media facades
and creative installations. The Exterior PixLine 10 can be combined
with a wide variety of lenses and diffusers for the right look for every
application. The Exterior PixLine 10 is driven by the Martin P3 System
Controller family for easy setup and video display, and it is also
backwards compatible with DMX. The fixtures can be fully customized
in terms of length and color to match every installation requirement,
while the power source is hidden.

How processing works for LED video

Wide variety of pixel pitch, lens and diffusers options for flexibility of look

Fully outdoor-rated and customizable in terms of length and color

Easy setup and cabling for clean installation

F E A T U R E S

T E CHNI CA L S P E CI F I CA T I O NS

Physical

Control and Programming

•

10 mm pixel pitch

•

250 cd per meter calibrated

•

160 lumen per foot calibrated

•

High

-quality 16-bit per color image processing technology

•

Pixel

-level brightness and color calibration for optimal image quality

•

P3/DMX controllable (automatic protocol detection)

•

Intuitive mapping and addressing via P3 System Controller

•

Combined power/data input (single cable for power and data input)

•

Supported by integrated power and data processor (P3 PowerPort 1500
or P3 PowerPort 1000 IP) and simple cabling system

•

Available in standard length of 1280 mm and 320 mm (customized lengths
also available)

Length: Available in 320 mm (12.6 in.) and 1280 mm (50.4 in.) length versions
Custom lengths are available to special order on project basis as follows:
Minimum custom length: 300 mm (11.9 in.)
Maximum custom length: 2000 mm (78.8 in.)
Custom length increments: 20 mm (0.8 in.)
Width: 27 mm (1.1 in.)
Height with flat diffuser / clear front: 32 mm (1.3 in.)
Height with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.)
Height with graze (asymmetric wallwasher) lens: 42 mm (1.7 in.)
Height with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.)
Height with round diffuser: 42 mm (1.7 in.)
Height with round diffuser in mounting profile: 84 mm (3.4 in.)
Weight: 1.2 kg / m (0.9 lbs. per foot)

Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 /
Martin P3™ PowerPort 1000 IP, and/or DMX
Protocol detection: Automatic
Control modes: RGB, basic, segment and pixel-level
DMX channels: 3/10/13/31/103/391
Setting and addressing: Martin P3™ System controller or RDM-compliant controller
Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color



©

2015 Martin Professional

Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: [phone] • Fax: [phone] • www.martin.com

Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Control/User Interface

Optics

Photometric Data

Video Processing

Signal Protocol

Construction

Installation

Connections

Electrical

Thermal

Approvals

Accessories

Color and intensity calibration: Pixel-level

DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20

Firmware update: Via Martin P3™ System Controller

Device status: Multi-color visual indication

Device test and reset: Magnetic pushbutton to call up local test patterns and reset
device

Options:

Clear Front

Flat Diffuser

Round Diffuser

Square Diffuser

Linear Asymmetric Lens (Graze version)

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer’s test conditions:

Color resolution: 16 bits per color (48 bit per pixel)
Viewing angle: 120° x 120°
Pixels per meter: 100
Pitch (pixel center-to-center): 10.00 mm
Luminous intensity, calibrated mode: 250 cd per meter*
Total output, calibrated mode: 750 lumens per meter*
Total output, calibrated mode: 8 333 nits (modules spaced 30 mm center-to-center)*

*Preliminary data, figures are approximate:

Brightness control
Gamma correction and control
Color temperature control
Color space control
Calibration processing
Synchronization

P3 (via Martin P3™ PowerPort) or DMX

Base: Extruded aluminum profile
Color: Alu Grey (customized colors available on project basis)
Protection rating: IP66
Impact resistance: IK05
RoHS compliant

Orientation: Any
Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting
profile

Power and data input: 6-pin custom (BBD) IP66-rated
Power and data thru: 6-pin custom (BBD) IP66-rated
Hot plugging compatible

Nominal input voltage: 48 VDC +/- 4%
Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™
Power IP66 or generic 48 VDC PSU
Max. total power consumption: : 33 W per meter (at max. intensity, full white)

Cooling: Convection
Maximum ambient temperature (Ta max.): 55° C (131° F)
Minimum ambient temperature (Ta min.): -30° C (-22° F)
Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter

EU safety: EN 60950-1, EN 60950-22
EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
US safety: UL 60950-1, UL 60950-22
US EMC: FCC Part 15 Class A
Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
Canadian EMC: ICES-003 Class A
Australia/NZ: RCM

Magnetic Test Tool, set of 10: P/N 91610139

Mounting hardware

Exterior PixLine™ 10 Mounting Profile, 320 mm (12.6 in.), aluminum: P/N 91611620
Exterior PixLine™ 10 Mounting Profile, 1280 mm (50.4 in.), aluminum: P/N 91611610
Exterior PixLine™ Mounting Profile Locks, set of 10: P/N 91611725

Cables

Power + Data Input Cable, 4-pin male XLR (for P3 PowerPort 1500) to fem. BBD, 0.25
m (0.9 ft.):

P/N 11840257
Power + Data Input Cable, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25 m
(0.9 ft.):

P/N 11840276
Power + Data Input Cable, 5-pin male XLR + male Tripix IP66 PSU to fem. BBD, 0.25 m
(0.9 ft.):

P/N 11840275
Power + Data Extension Cable, Installation type CMX, BBD-BBD 1 m (3.3 ft.):

P/N
11840270
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5 m (8.2 ft.):

P/N



©

2015 Martin Professional

Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: [phone] • Fax: [phone] • www.martin.com

Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice