MartinLogan NEOLITH Brochure
TM
NEOLITH
Rosso Fuoco
Gloss Red
Cordoba Red
Metallic Maroon
Standard Color Options
Deep Sea Blue
Metallic Blue
Basalt Black
Metallic Black
Arctic Silver
Metallic Silver
(Light)
Desert Silver
Metallic Silver
(Tan Tint)
Meteor Grey
Metallic Silver
(Dark)
TM
NEOLITH
System Frequency Response:
23–22,000 Hz ± 3db
Recommended Amplier Power:
50–1,300 watts per channel at 4 Ohms
Dispersion:
Horizontal: 30 Degrees
Vertical: 48” (122 cm) line source
Sensitivity:
90 dB/2.83 volts/meter
Impedance:
Nominal: 4 ohms, 0.43 ohms @ 20 kHz.
Crossover Frequency:
60, 250–400 Hz
High/Mid Frequency Driver:
48” x 22” (122 x 56 cm) CLS XStat electrostatic
(1,056 in2/6,813 cm2)
Woofers:
15” (38.1cm) cast basket, high excursion, rigid aluminum
cone with extended throw drive assembly. Extensively
vented triple shorting ring motor and 4-layer coil to
eliminate compression and distortion.
12” (30.5cm) round cast aluminum alloy frame,
high excursion, rigid carbon ber sandwich cone
with long throw design, 3-inch (7.5cm) diameter
copper-clad aluminum at wire voice coil, and
vented pole piece and under-spider opening to
reduce power compression.
Enclosure:
Phenolic Resin Polymer: Dense substrate with superb
mechanical strength minimizes cabinet vibrations caused
by woofer cone motion counter forces to provide an ideal
bafe for the electrostatic panel and woofers.
Components:
High-Pass Crossover: 1% resistors mounted to heat sinks,
polypropylene capacitors, air core inductors, dual toroidal
audio transformers to drive electrostatic element
Low-Pass Crossover: 1% resistors mounted to heat sinks,
toroidal inductors, supports user options to modify sound
output via jumpers
Bass Control:
0dB, -4dB, -8dB
Distance Control:
3 meters (or less), 4 meters, 5 meters (or greater)
Light Control:
On, Dim, Off
Signal Inputs:
WBT-0705Ag nextgen™ 5-way bi-wire binding posts feature
a ligree signal conductor made from ne silver for high
conductivity. Fully insulated for CE and IEC conformity
providing shock hazard protection. Free from eddy current
effects. Max constant current 30 A, admissible peak current
200 A. Outer metal cap with palladium plated nish.
Mains Power Draw:
Standby: 1W each
Max: 10W each
Weight:
385 lbs. each (175 kg)
Size (H x W x D):
74.8” × 30.3” × 34.2” (189.9 × 76.9 × 87 cm)
Weight (Crated):
600 lbs. each (273 kg)
Crate Size (H x W x D):
39.7” × 39” × 82.6” (100.8 × 99 × 210 cm)
Specications are subject to change without notice.
Loading...