Marshall Air ThermoGloTM User Manual

TM

ThermoGlo

Food Warming &
Holding Cabinets

ThermoGlo™

The Marshall ThermoGlo™ Food Warming and

Holding Equipment technology radiates uniform
heat side to side, end to end, on every square inch
of the heating surface. ThermoGlo™ is designed
with a flat, unbreakable radiating metal face
encased in stainless steel housing and delivers a
wide range of temperature capabilities to fill exact
warming and holding requirements. You identify
the required temperature, and then select the heat
intensity to furnish that specific temperature.
ThermoGlo™ surface has no reflectors, wire
guards, nooks or crannies so it wipes completely
clean with a moist cloth.

Model # Size Weight
500792 10"W x 18"L x 3" H 13 lbs.
500793 10"W x 24"L x 3" H 17 lbs
500794 10"W x 36"L x 3" H 26 lbs
500795 10"W x 48"L x 3" H 35 lbs
500797 10"W x 60"L x 3" H 43 lbs
500799 10"W x 72"L x 3" H 60 lbs

All Marshall products are supported by a
nationwide service organization and an in-house,
full-time Customer Support Department. To place
an order, call:

1-800-627-8368

ThermoGlo™ has no bulbs, lamps or tubes that
glow hot in a concentrated area reducing
element life and prohibiting uniform heat
radiation. Food stays “presentation ready”
longer because exact internal temperatures can
be reached faster and maintained longer.

FEATURES

• Even heat distribution across the entire

ThermoGlo™ surface means every square
inch of surface operates cooler, which lessens
oxidation and corrosion, and increases element
life.

• Extremely durable metal heating surface is

encased in a tough stainless steel housing.
There are no fragile exposed bulbs or tubes to
chip or break… or fall into food.

• ThermoGlo™ carries a full 2-year repair or

replacement guarantee.

ETL (US & Canada) & NSF Listed

FOR COMMERCIAL USE ONLY

*Ask about Marshall's companion High Speed Toasters,
Conveyor Broilers and Ventilation Systems.

Marshall Air Systems, Inc.

419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: [phone] Fax: [phone] • www.marshallair.com

Printed in U.S.A.© Marshall Air Systems, Inc. 2007 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.

Rev041609