Marshall Air MM1E General Manual
TM
ThermoGlo
Model MM1 Series
Heat Station
Model MM1
The Marshall Model MM1 Series features
our ThermoGlo™ heating technology. Heat
radiates from every square inch of the upper
flat plate surface. This eliminates the need to
clean intricate calrod, wire and reflector
assemblies. An accessory 120 V receptacle at
the back is ideal for powering a timer. This
receptacle is furnished only on Model MM1.
The Model MM1C is equipped with an
infinite switch to control the temperature.
Model MM1E is the high-intensity heat
version, while the Model MM1D is the half-
size version.
In addition to french fries, this holding unit
can be used for a variety of other fried foods
such as wings, chicken, hush puppies, onion
rings and more.
All Marshall products are supported by a
nationwide service organization and in-house,
full-time Customer Support Department. To
place an order call:
1-800-627-8368
Marshall Air Systems, Inc.
419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: (704) 525-6230 Fax: (704) 525-6229 • www.marshallair.com
Printed in U.S.A.© Marshall Air Systems, Inc. 2007 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.
Marshall's most popular french fry holding
unit features ThermoGlo™ technology.
This unit can also be used for holding and
warming a wide variety of foods.
FEATURES
• Even heat eliminates hot and cold spots
• Holds full size 12" x 20" steam table pan
(not included.) MM1D holds ½ size pan
(not included.)
• Flat surface allows for easy wipe-clean
maintenance
• Food stays “presentation ready” longer
because exact internal temperatures can be
reached faster and maintained longer
CONSTRUCTION
• Heavy gauge stainless steel
• Designed and built to custom
specifications with heat radiating from the
ThermoGlo™ surface
• Designed with a flat unbreakable radiating
metal face encased in stainless steel
housing
ETL (US & Canada) & NSF Listed
FOR COMMERCIAL USE ONLY
*Ask about Marshall's companion High Speed Toasters,
Conveyor Broilers and Ventilation Systems.
Rev032910
TM
ThermoGlo
Model MM1 Series
Heat Station
Overall Dimensions
Model MM1 Series
Dimensions: Height: Width: Depth:
MM1 / MM1C/ MM1E 19.875″ (504 mm) 13.000″ (330 mm) 24.125″ (613 mm)
MM1D 19.250″ (489 mm) 13.000″ (330 mm) 13.625″ (346 mm)
Shipping Weight: Ship Wt: Freight (USA): Ship. Cubes:
Information: Net 22 lbs. (10 kilos) 28 lbs. (13 kilos) NMFC 5 cubic ft.
Class 100 .14 cubic meters
Electrical
MM1 / MM1C 120V/ 50/60 Hz/ 7 amps/ 0.84 kw 220-240V/50Hz/1 ph
and 5 amps/ 0.6 kw or 4 amps (Intl)/ 0.88-0.96 kw
MM1D 120V/ 50/60 Hz/ 4 amps/ 0.48 kw
MM1E 120V/ 50/60 Hz/ 8.3 amps/ 0.996 kw
Gas Supply: None
Options: None
Marshall Air Systems, Inc.
419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: (704) 525-6230 Fax: (704) 525-6229 • www.marshallair.com
Printed in U.S.A.© Marshall Air Systems, Inc. 2007 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.
Rev032910
Loading...