Marshall Air CR1 User Manual
TM
ThermoGlo
Model CR1
Transfer Cabinet
The Marshall Model CR1 Transfer Cabinet
features our ThermoGlo™ technology. Heat
radiates from every square inch of the upper and
lower flat plate heating surfaces. This
eliminates the need to clean intricate calrod,
wire and reflector assemblies. An integrated
temperature/time control maintains consistent
programmable product temperatures on both top
and bottom of each tier. A four-channel timer
allows you to track holding of up to four
products. Timers can be “linked” to track
product rotation or independent to track
individual products.
The CR1’s flat heating surfaces help retain heat
more efficiently and longer. This cabinet has
the capacity for pizzas, sandwiches and a wide
variety of other food products.
All Marshall products are supported by a
nationwide service organization and an inhouse, full-time Customer Support Department.
To place an order, call:
1-800-627-8368
419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: (704) 525-6230 Fax: (704) 525-6229 • www.marshallair.com
Printed in U.S.A.© Marshall Air Systems, Inc. 2001 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.
Marshall's Transfer Cabinet incorporates
ThermoGlo™ technology designed to hold
pizzas, sandwiches and other wrapped foods
while maintaining consistent temperature
requirements for food quality and safety
(HACCP).
FEATURES
• Microprocessor controls exact heat intensity
to furnish a specific temperature for top and
bottom of each tier
• Delivers a wide range of temperature
capabilities to fill exact warming and
holding requirements
• Flat surface allows for easy wipe-clean
application
• Food stays “presentation ready” longer
because exact internal temperatures can be
reached faster and maintained longer
• Illumination is provided by (3) 25 watt,
36″ fluorescent lights
• 4 channel timer
CONSTRUCTION
• Heavy gauge stainless steel
• Designed and built to custom specifications
with heat radiating from the ThermoGlo™
surfaces
• Designed with a flat unbreakable radiating
metal face encased in stainless steel housing
ETL (US & Canada) & NSF Listed
FOR COMMERCIAL USE ONLY
*Ask about Marshall's companion High Speed Toasters,
Conveyor Broilers and Ventilation Systems.
Marshall Air Systems, Inc.
Rev09302011
ThermoGlo
Model CR1
Transfer Cabinet
TM
Overall Dimensions
Model CR1
Dimensions: Height: Width: Depth:
43.500” (1105 mm) 54.313” (1380 mm) 26.00” (660 mm)
_________________________________________________________________________________________________
Shipping Weight: Ship Wt: Freight (USA): Ship. Cubes:
Information: Net 560 lbs. (240 kilos) 610 lbs. (277 kilos) NMFC 102 cubic ft.
Class 100 2.9 cubic meters
_________________________________________________________________________________________________
Electrical 208V/60Hz/1ph 26amps/ 5.408 kw
Wiring: 3 Wire no neutral
6 ft. cord
Marshall Air Systems, Inc.
419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: (704) 525-6230 Fax: (704) 525-6229 • www.marshallair.com
Printed in U.S.A.© Marshall Air Systems, Inc. 2001 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.
Rev09302011
Loading...