Marshall Air AP8 Series General Manual
ThermoGlo
Model AP8 Series
Dump Station Heater
Model AP8
The Marshall Model AP8 Series Dump Station
Heater features our ThermoGlo™ heating
technology. Heat radiates from every square
inch of the upper flat plate heating surface. This
eliminates the need to clean intricate calrod,
wire and reflector assemblies.
This unit is designed to mount on virtually any
fryer manufacturer’s dump station, including gas
(AP8) or electric (AP8B) profiles. French fries,
onion rings and hush puppies and more are ideal
food products for this technology.
All Marshall products are supported by a
nationwide service organization and in-house,
full-time Customer Support Department. To
place an order call:
1-800-627-8368
Marshall's AP8 & AP8B, Dump Station
Heater incorporates ThermoGlo™
technology designed to solve demanding
warming and holding temperature
requirements.
FEATURES
• Delivers a wide range of temperature
capabilities to fill exact warming and
holding requirements
• Flat surface allows for easy wipe-clean
maintenance
• Food stays “presentation ready” longer
because exact internal temperatures can be
reached faster and maintained longer
CONSTRUCTION
• Heavy gauge stainless steel
• Designed and built to custom
spe
cifications with heat radiating from the
ThermoGlo™ surface
• Designed with a flat unbreakable radiating
metal face encased in stainless steel
housing
ETL (US & Canada) & NSF Listed
FOR COMMERCIAL USE ONLY
*Ask about Marshall's companion High Speed Toasters,
Conveyor Broilers and Ventilation Systems.
TM
Marshall Air Systems, Inc.
419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: (704) 525-6230 Fax: (704) 525-6229 • www.marshallair.com
Printed in U.S.A.© Marshall Air Systems, Inc. 2007 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.
Rev041609
TM
ThermoGlo
Models AP8 & AP8B
Dump Station Heater
Overall Dimensions
Models AP8 & AP8B
Dimensions: Height: Width: Depth:
AP8 7.75” (197 mm) 12” (305 mm) 22.125” (562 mm)
AP8B 17.75” (451 mm) 12” (305 mm) 22.125” (562 mm)
Shipping NMFC
Information: Weight: Ship Wt: Freight (USA): Ship. Cubes:
AP8 13 lbs. (6 kilos) 15 lbs (7 kilos) Class 100 5 cubic ft. (.14 cubic meters)
AP8B 18 lbs. (8 kilos) 22 lbs. (10 kilos) Class 100 5 cubic ft. (.14 cubic meters)
Electrical 110/120V, 50/60Hz, 1Ph-9Amps
Wiring: NEMA 5-15 Plug
6 ft. cord
Gas Supply: None
Options : None
Marshall Air Systems, Inc.
419 Peachtree Drive South • Charlotte, North Carolina 28217 USA • Phone: (704) 525-6230 Fax: (704) 525-6229 • www.marshallair.com
Printed in U.S.A.© Marshall Air Systems, Inc. 2007 All rights reserved.
Marshall’s commitment to quality and product improvement may change specifications from time to time.
Rev041609
Loading...