49 Bathurst St Suite 101 Toronto, ON M5V 2P2 Canada
marshallfridge.com
MODEL
MF-110-XMC / MF-220-XMC
marshallfridge.com
Congratulations!
Things just got a whole lot cooler with the arrival of your new Marshall Fridge.
Your Marshall Fridge proudly features authentic Marshall Amp parts. With
fret cloth, knobs that go to 11, Jim Marshall’s signature on the brass finished
faceplate and custom branded glass shelving, the Marshall Fridge is the
ultimate combination of rock and refrigeration.
It’s a sweet roadie for your cold ones (whatever they may be). It’s the ultimate
accent for any green room, dorm room, man cave, studio or garage. And it’s a
great start (or addition) to any Marshall collection.
So where are you going to put your new Marshall Fridge? That’s up to you, but
if you’re stuck, just ask yourself, “what would a rock god do?” Then do it and
tell us about it.
Enjoy. And stay Cool.
XMC Branded Products – Bringing you the Marshall Fridge
72
1
Contents
WARNING
DANGER
CAUTION
WARNING
WARNING
DANGER
WARNING
DANGER
CAUTION
Compact Refrigerator
Owner’s Manual and Care Guide
Features ............................................................................................................................................................7
Care and Maintenance ................................................................................................................................. 9
Read and follow all safety rules and operating instructions before the first use of this product.
Safety Symbols
Safety Alert Symbol: alerts you to potential hazards that can injure you and others. All safety
messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
DANGER
WARNING
Danger: failure to heed this safety statement may result in personal
injury or death.
Warning: failure to heed this safety statement may result in
extensive product damage, serious personal injury, or in some
cases death.
CAUTION
Caution: failure to heed this safety statement may result in minor or
moderate personal injury, property or equipment damage.
2
71
Safety Instructions
Electrical Requirements
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical
shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or serviceman if the grounding instructions are not completely
understood or if doubt exists as to whether the appliance is properly grounded.
WARNING
Electrical Connection
• There is no power on the exterior control panel of the Marshall Fridge. The switches do not light up; the knobs and
jacks are aesthetic only.
• Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal
safety, this appliance must be properly grounded.
• The MF-110-XMC model requires a 110 Volt AC. The MF-220-XMC model requires a 220 Volt AC. Have the wall outlet
and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong
wall outlet is encountered, it is customer’s responsibility and obligation to have it replaced with a properly grounded
3-prong wall outlet. For voltage and outlet style please refer to our website www.marshallfridge.com.
• The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury.
• Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along its length or at either end.
70
• When moving the unit, be careful not to damage the power cord.
3
WARNING
DANGER
WARNING
DANGER
• It is recommended that a separate circuit, serving only your refrigerator be provided. Use receptacles
that cannot be turned off by a switch or pull chain.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the refrigerator or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
• Do not attempt to repair or replace any part of your refrigerator unless it is specifically recommended in this manual.
All other servicing should be referred to a qualified technician.
• Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost refrigerator.
Do not puncture refrigerant tubing.
WARNING
• To ensure proper ventilation, the front of the unit must be completely unobstructed. Choose a well-ventilated area
with temperatures above 60°F (16°C) and below 90°F (32°C).
• The unit must be installed in an area protected from the weather or other external conditions, such as wind, rain, water
spray or drips.
• The refrigerator should not be located next to ovens, grills or other sources of high heat.
• The refrigerator must be installed with all electrical, water and drain connections in accordance with the state
and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required. For voltage and outlet style please refer
to our website www.marshallfridge.com.
• Do not kink or pinch the power supply cord of refrigerator.
• The fuse (or circuit breaker) size should be 15 amperes.
• Make sure that the pipes are not pinched, kinked or damaged during installation.
• If you use the drainage container, you MUST set the Drain Select switch to OFF or the water can overflow
from the drainage container.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
• Do not damage the refrigerator circuit.
CAUTION
• Do not use electrical appliances inside the food storage compartments of appliance, unless they are
of the type recommended by the manufacturer.
4
69
WARNING
DANGER
CAUTION
• Risk of fire or explosion. Flammable refrigerant used. Consult repair manual/owner’s guide before attempting
to service this product. All safety precautions must be followed.
• Risk of fire or explosion. Dispose of property in accordance with federal or local regulations.
Flammable refrigerant used.
• Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully.
Flammable refrigerant used.
DO NOT USE AN EXTENSION CORD
• Use an exclusive wall outlet. Do not connect the Marshall Fridge to extension cords together with
any other appliance in the same wall outlet. Do not splice the cord.
IMPORTANT WARNING
• Never clean the refrigerator/freezer parts with flammable fluids since this can possibly cause a fire
hazard or explosion. Do not store or use gasoline or any other flammable fluids that can cause a fire
hazard or explosion.
DANGER: Risk of child containment! Never allow children to operate, play with, or crawl
inside the appliance. Before you throw away your old refrigerator/freezer:
• Take off the doors.
• Leave the shelves in place so that children may not easily climb inside.
• Do not let children pull or play with the knobs, or put them in their mouths.
Save these instructions
68
5
Installation Instructions
Before Using Your Unit
Remove the exterior and interior packaging.
Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the
possibility of a malfunction in the cooling system from handling during transportation.
Installing Your Unit
This appliance is designed to be free standing only, and should not be recessed or built-in.
Location
Remove exterior and interior packaging; wipe the outside thoroughly with a soft dry cloth and the inside with a damp,
lukewarm cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or moisture. Let air
circulate freely around the unit. Keep the rear of the refrigerator 5 inches away from the wall.
Follow Below Steps Carefully:
1) Select a place with a level floor.
2) Allow 5 inches of space between the back of the refrigerator and any adjacent wall.
3) Avoid direct sun and heat. Direct sunlight may affect the coating. Heat sources nearby will cause higher electricity
consumption.
4) Avoid damp places. Too much moisture in the air will cause frost to form very quickly on the evaporator, and your
refrigerator will have to be defrosted more frequently.
5) Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be
directed to a certified electrician or an authorized call center. For voltage and outlet style please refer to our website
www.marshallfridge.com.
6) After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the
refrigerator and freezer compartments.
6
67
Features
Model Number: MF-110-XMCModel Number: MF-220-XMC
1) Freezer Compartment Door 6) Fixed Leveling Leg – 1
2) Drip Tray 7) Can Dispenser (MF-110-XMC model only)
3) Removable Shelf (Big) 8) Door Bins (3) / (1) 2-Litre Bottle Bin
4) Removable Shelf (Small) 9) Thermostat
5) Adjustable Leveling Leg – 1
Using Your Ice Cube Tray
• Recommended thermostat setting for ice making is position 5.
• Fill 2/3 of the ice cube tray with cold water or with any liquid suitable for freezing
and place the tray on the bottom of the chiller compartment to freeze properly.
• Dry the tray; otherwise it may stick to the bottom of the chiller.
• The best method to get ice cubes out of the tray is to hold the tray under cold tap
water for a second.
• To eject the ice cubes from the tray, place over the ice bucket and twist slightly.
Freezer Compartment
• This compartment is designed for production of ice cubes and short-term storage (3-4 days) of some commercially
frozen foods. The temperature in this compartment does not get cold enough to freeze food safely for long periods
and works best when the food is already frozen.
• The chiller door is susceptible to breaking due to excessive ice buildup. This part is not covered under your warranty.
Defrost when the ice reaches 1/4 inch of thickness.
Certification
66
• To view all Marshall Fridge certifications, please visit marshallfridge.com
7
Operating Instructions
WARNING
DANGER
Setting the Temperature Control
• The temperature control panel is located on the upper part of the refrigerator. The first time you turn on the unit,
set the temperature control to “5”.
• The range of the temperature control is from position “0” to “5”. After 24 to 48 hours, adjust the temperature control
to the setting that best suits your needs. Level 3 is recommended.
• To turn off the refrigerator change the temperature control to “0”.
Important Note
Turning the temperature control to “0” position stops the cooling cycle but it
doesn’t shut off. If the unit is unplugged, has lost power, or it is turned off,
you must wait 3 to 5 minutes before restarting the refrigerator.
If you attempt to try and restart prior to completion, the unit will not start.
Reversing the Door Swing of Your Appliance
CAUTION
Your refrigerator is built with a reversible door. You have the choice of either opening it from the left or the right side.
In order to reverse the opening direction of your door, please follow these simple instructions.
1) Upper Hinge Cover 5) Down Door Hinge
2) Hinge Fixed Screws 6) Down Door Hinge Screws
3) Upper Hinge 7) Adjustable Foot
4) Adjustable Foot 8) Door
• Remove the hinge cover (1) and unscrew upper hinge screw (2). Remove upper hinge (3).
• Lie the unit down on the floor for support
• Remove the door leg (4 & 7) and unscrew screws (6), remove lower hinge (5).
8
65
WARNING
DANGER
WARNING
DANGER
• Change the position of lower hinge (5) to the opposite side of the appliance, locate and support the door onto the
lower hinge (5), replace screws (6) and adjustable foot (4 & 7), align door and replace the upper hinge (3) and replace
screws (2).
• Fit the hinge cover (1).
Care and Maintenance
Marshall Fridge Exterior Care
Use a dry cloth to dust off fret cloth fabric, very gently. Use a damp cloth for metal surfaces.
Defrosting Your Unit
• Defrosting of your refrigerator should take place whenever ice build-up inside the freezer compartment reaches
1
/4 inch of thickness. Set the thermostat dial to “0” position.
• To speed up the defrosting process, remove all frozen foods from the freezer section. Leaving the door partially ajar
for a short period of time will also speed up the process.
WARNING
• You must remember to close the refrigerator door before the defrost cycle terminates and normal operating
conditions resume automatically. The drip tray should be in position directly below the freezer compartment to catch
condensed water during defrosting.
• Never use sharp or pointed instruments to remove ice from the freezer compartment. The freezer compartment
contains refrigerated gas lines and if accidentally punched/pierced, will render the refrigerator inoperable and void the
manufacturer’s warranty.
CAUTION
Failure to unplug the unit could result in electrical shock or personal injury.
Cleaning Your Unit
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
• Turn the temperature control to “0”, unplug the unit, and remove the food, shelves, and trays.
• Wash the inside surfaces with a warm water and baking soda. The solution should be about 2 tablespoons of baking
soda to a quart of water.
64
• Wash the shelves and trays with a mild detergent solution.
• The outside of the unit should be cleaned with a soft dry cloth.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor
the interior.
9
Power Failure
Most power failures are corrected within a few hours and should not affect your refrigerator temperatures. However,
you should minimize the number of door openings while the power is off. During power failures of longer duration, take
steps to protect your food by placing ice on top of packages.
Vacation Time
For short vacation periods, leave the control knob at its normal setting. During longer absences:
(a) Remove all food.
(b) Disconnect the power cord from electrical outlet.
(c) Clean the refrigerator thoroughly.
(d) Leave door open to avoid possible formations of condensate, mold or odors.
If You Move
• Remove or securely fasten down all loose items inside the unit. To avoid damaging the leveling legs, turn them all the
way into the base.
• The refrigerator should be in the upright position during transportation.
• Tape the door if you judge necessary.
Energy Saving Tips
• The unit should be located in the coolest area of the room, away from heat producing appliances, and out of
direct sunlight.
• Cool down food to room temperature before placing in the refrigerator.
• Wrap food properly, and wipe containers dry before placing them in the refrigerator.
• Organize and label food to reduce door openings and extended searches. Remove as many items as needed at
one time, and close the door as soon as possible.
WARNING
10
63
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.