Marshall M-DSL100HR-U Users Manual
DSL100HR &
DSL40CR
OWNER’S MANUAL
INTRODUCTION
Congratulations on your purchase of this Dual Super Lead (DSL) amplier from
Marshall Amplication.
The DSL provides the legendary Marshall tone, allowing you to express your distinct
playing style and attitude. From clean to distorted overdrives, the DSL is a versatile
all valve amp that allows you to easily dial in the sound you desire.
This DSL amplier not only delivers the tone you expect from a Super Lead amplier
it is also packed with an array of features such as an effects loop, power reduction
and studio quality digital reverb. Right out of the box your DSL provides you with
the functionality you need to take your sound from rehearsal to the stage with
condence.
Your DSL amplier has been designed specically for those who need the full rich
tone of a valve amp. This makes the amp ideal for a live environment, studio or at
home thanks to the power reduction system.
We hope you enjoy performing, practicing and recording with your DSL amplier.
- The Marshall Team.
DSL 100/40 OVERVIEW
The DSL 100 Head and 40 Combo feature the same functions. The combo is loaded
with a 12” G12 V-type speaker chosen for its ability to deliver exceptional tone and
exibility.
The DSL features two foot switchable channels: CLASSIC GAIN and ULTRA GAIN.
The CLASSIC GAIN channel delivers sparkling clean sounds through to the more
aggressive break-up of a Marshall JCM800 amplier. The ULTRA GAIN channel
provides even more distortion and break-up for players looking for higher gain tones
from their amplier.
Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE
controls. The EQ section also features Tone Shift, which when activated recongures
the pre-amp mid frequencies making DSL ideal for contemporary metal tones,
especially when combined with higher gain settings.
The DSL features professional quality digital REVERB and a series FX LOOP. The LOW
POWER function adds a further dimension to the DSL sound, giving you rich valve
tone at an ear-friendly volume.
For the most demanding players, the DSL 40 Combo and DSL 100 Head feature MIDI
compatibility meaning outboard MIDI equipment can access all the features needed
to perform.
ENGLISH
WARNING! IMPORTANT SAFETY INSTRUCTIONS
COMPLIANCE STATEMENT
WARNING:
Before going any further, make sure that
your amplier is compatible with your
mains electricity supply. If you have any
doubt, please seek help from a qualied
technician – your Marshall dealer can
help you in this respect.
MAINS INPUT & FUSE:
The specic mains input voltage
rating that your amplier has been
manufactured for is indicated on the
rear panel of the amplier. Your amplier
is provided with a detachable mains
(power) lead, which should be connected
to the MAINS INPUT socket on the rear
panel of the amplier (Rear Panel Function
#26). The correct value and type of
mains fuse is specied on the rear panel
of the amplier.
NEVER attempt to bypass the fuse or t
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your amplier is
switched off, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before attempting to
move it.
IMPORTANT SET UP INFORMATION:
1. When using the DSL20HR, or the
DSL20CR with an extension speaker
cabinet(s), make sure that the
speaker cabinet(s) is connected to
the correct impedance loudspeaker
jack socket(s) on the rear panel of the
amplier. See the LOUDSPEAKERS
guide in this manual for specic
information regarding impedance
matching (Rear Panel Function #33).
WARNING:
Failure to do the above may damage
your amplier. When connecting a
speaker cabinet make sure that you use
a proper speaker cable. Never use a
screened (shielded) guitar cable for this
purpose.
2. Ensure that the POWER switch is
set to the OFF position (Front Panel
Function #25).
3. Ensure the OUTPUT switch is in the
STANDBY position (Front Panel
Function #24).
4. Connect the supplied mains (power)
lead into the MAINS INPUT (Rear
Panel Function #26) rst and then
into an electricity outlet.
5. Ensure that the volume controls on
the front panel are set to zero (Front
Panel Functions #19 & #21).
6. Plug your guitar into the INPUT jack
socket (Front Panel Function #1).
7. Switch the amplier ON using the
POWER switch, wait for a few
minutes and then switch the
OUTPUT switch to either the LOW
or HIGH position.
8. Turn the front panel POWER switch
on and wait for a few minutes
before going to point 9.
9. Turn the selected channel volume
up to your preferred level and your
amplier is ready to play.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modications not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
This device complies with CAN ICES-3(B)/NMB-3(B)
PLEASE READ THIS MANUAL CAREFULLY
BEFORE PLUGGING IN.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.
KEEP THESE INSTRUCTIONS.
ENGLISH
ENGLISH
Loading...