Page 1
Broadcast A/V Division
CV420e
Compact UHD60fps ePTZ Camera
(USB, IP & HDMI)
User Manual
Page 2
Table of Contents
Chapter 1 Package Contents .........................................................................2
Chapter 2
Function Introduction ..................................................................... 3
2.1
I/O functions Introduction ..............................................................3
2.2
Tally Lamp Function Description .................................................... 3
CV420e User Manual
CHAPTER 1: PACKAGE CONTENTS
CV420e Power Cord Power Adapter
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Instruction for installation ...............................................................4
3.1
Basic Devices ................................................................................4
System diagram ............................................................................. 5
Remote Control and Setting Menu ................................................6
5.1
Functions of remote control ........................................................... 6
5.2
Setting Menu ..................................................................................7
Network Function Settings Description ....................................... 13
6.1
Web System Requirements .........................................................13
6.2
Web Page Function Description ..................................................14
Remote CVM-5 Stand Warranty Card
Chapter 7
Chapter 8
Warranty Information
1 2
Troubleshooting ........................................................................... 27
Safety Instructions .......................................................................28
............................................................................................29
www.marshall-usa.com
Page 3
CV420e User Manual
CHAPTER 2: FUNCTION INTRODUCTION
2.1 I/O Functions Introduction
Front View Back View
12
3 87 10
54 6
9
CHAPTER 3: INSTRUCTIONS FOR INSTALLATION
3.1 Basic Devices
3.1.1 CV420e size
Length x Width x Height: 122.06 x 70 x 51 mm Weight: 0.35 Kg
Bottom
1112
#
1 IR receive Support infrared remote control
2 Tally Lamp Display the Tally Lamp status of the camera
3 Lens HD camera lens
4 Power indicator Display the status of the camera
5 DC 12 V power connector AC power supply connecting port
6 Network port
7 Audio input Support Line In/Mic In audio input
8 HDMI 2.0 output Connect to HDMI output signal source
9 USB 3.0 Type-B port
10 Reset button Press and hold for 5 seconds to reset the machine
11 Tripod locating holes Tripod locating holes
12 Tripod screw holes Support 1/4”, 20 UNC
Item Function Descriptions
Network cable port supports routers or hubs of
IEEE802.3af with PoE power supply
Connect to the computer using a USB cable; capture
images via the software
2.2 Tally Lamp Function Description
2.2.1 The tally indicator light function may be enabled through the control of VISCA
command. The setting method is as follows:
Tally Mode: 8x 01 7E 01 0A 01 0p FF
p = 4: On (half-brightness)
3.1.2 Installation Method
You can use the included Marshall CVM-5 monitor
and desk stand, or any ¼”- 20 capable camera
mount type to attach to tripods, wall mounts,
ceiling mounts, etc
p = 0: OFF
3 4
p = 5: On (full-brightness)
www.marshall-usa.com
Page 4
CV420e User Manual
CHAPTER 4: SYSTEM DIAGRAM
Power Supply AV over IP switch
CHAPTER 5: REMOTE CONTROL & SETTING MENU
5.1 Functions of Remote Control
*IR remote included in this package
Item Description
v w r sv w r s
Back Light
Camera select Choose Camera ID 1~3
Focus- Manual /Far/Near Reserved
Focus-Auto Reserved
Freeze Freeze the screen
Move the lens
Turn on/off back light
compensation
*
Line/Mic Device Audio In ComputerDisplay
Home-Enter
Info Status information
L/R Direction Set L/R Direction / Normal
Menu Display OSD menu
Mirror
Pan/Tilt Reset Clear the Pan / Tilt setting
Picture
Power Power Switch
Preset
Reset
Zoom-Fast Adjust image size
Go back to the main page /
Execute
Rotate the image
(OFF / Mirror / Flip / Rotate)
Switch image effect
(OFF / Neg / B&W)
Appoint an ID (0~9) to save the
current position data
Appoint an ID (0~9) to delete the
current position data
Zoom-Slow Fine-tune image size
5 6
www.marshall-usa.com
Page 5
5.2 Setting Menu
Press [Menu] on the remote control to enter the setting menu;
the bold underlined values in the following table are defaults.
CV420e User Manual
7 8
www.marshall-usa.com
Page 6
CV420e User Manual
9 10
www.marshall-usa.com
Page 7
CV420e User Manual
11 12
www.marshall-usa.com
Page 8
CHAPTER 6: NETWORK FUNCTION SETTING DESCRIPTION
6.1 Web System Requirements
CV420e User Manual
6.2 Connecting Camera to Network
Two common connection methods are shown below
1. Connecting via switch or router
AV over IP switch
2. To connect directly through network cable, the IP address of the computer should
be changed so that it is on the same network segment as the camera
E.g.: The factory-preset default IP address of the camera is 192.168.100.100.
The computer IP address must be set with the same network segment, such as
192.168.100.101, so that the computer can be connected correctly with the camera
13
14
Page 9
CV420e User Manual
15 16
www.marshall-usa.com
Page 10
CV420e User Manual
17 18
www.marshall-usa.com
Page 11
CV420e User Manual
19 20
www.marshall-usa.com
Page 12
CV420e User Manual
21 22
www.marshall-usa.com
Page 13
CV420e User Manual
23
Page 14
CV420e User Manual
25 26
www.marshall-usa.com
Page 15
CHAPTER 8: SAFETY INSTRUCTIONS
CV420e User Manual
27 28
www.marshall-usa.com
Page 16
Warranty
Marshall Electronics warranties to the first consumer that this device will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for
a period of two years from the purchase date. This warranty is extended to the first consumer
only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase
provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty
set forth above. Therefore, labor and parts may be charged to the consumer. This warranty
does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or
modifications in design or construction void this warranty. No sales personnel of the seller or
any other person is authorized to make any warranties other than those described above, or to
extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period
described above.
Due to constant effort to improve products and product features, specifications may change
without notice.
29
20608 Madrona Avenue, Torrance, CA 90503
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.marshall-usa.com
support@marshall-usa.com
Loading...