Marquant MCR-1295 Owner's Manual
MCR-1295
OWNER’S MANUAL
Mobile Video System
DVD Player with Radio
4.3 Inch Touch Screen Monitor
RDS (Radio Date System) Function
USB Interface
SD/MMC Card Interface
Remote Control
1
CONTENTS
SAFETY INFORMATION.................................
...................................................
3
DISC NOTES.........................................
...................................................
..........5
INSTALLATION .......................................
...................................................
........7
USING THE DETACHABLE FRONT PANEL...................
...................................10
CONNECTIONS........................................
...................................................
.......11
LOCATIONS AND FUNCTION OF THE PLAYER ...............
...............................12
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL.......
....................13
BASIC OPERATION....................................
...................................................
....16
MENU OPERATION.....................................
...................................................
....18
RADIO OPERATION....................................
...................................................
....................18
DVD OPERATION ......................................
...................................................
.....................21
USB/CARD OPERATION.................................
...................................................
...............28
AUXILIARY INPUT OPERATION..........................
...................................................
..........28
BACK SIGHT OPERATION...............................
...................................................
..............29
SETUP OPERATION....................................
...................................................
...................29
TROUBLE SHOOTING...................................
...................................................
.31
SPECIFICATIONS .....................................
...................................................
......33
2
SAFETY INFORMATION
Use This Product Safely
This unit has been designed and manufactured to ass
ure personal safety. Improper use can result in ele
ctric
shock or fire hazard. The safeguards incorporated i
n this unit protect you if you observe the followin
g
procedures for installation, use and servicing. Thi
s unit doesn’t contain any parts that can be repair
ed by the
user.
When Driving
Keep the volume level low enough to be aware of roa
d and traffic conditions.
When Car Washing
Do not expose the product to water or excessive moi
sture. This could cause electrical shorts, fire or
other
damage.
When Parked
Parking in direct sunlight can produce very high te
mperatures inside your vehicle. Give the interior a
chance
to cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with a 12 volt
DC, negative ground battery system the regular syst
em.
Protect the Disc Mechanism
Avoid inserting any foreign objects into the slot o
f this player.
Failure to observe this may cause malfunction due t
o the precise mechanism of this unit.
Use Authorized Service Centers
Do not attempt to disassemble or adjust this precis
ion product. Please refer to the Service Center lis
t
included with this product for service assistance.
For Installation
The unit should be installed in a horizontal positi
on with the front end up at a convenient angle, but
not more
than 30
0
.
Protect the Monitor Mechanism
The front panel with the monitor can be adjusted to
different positions for your need. It is operated
automatically. Do not turn it upward or downward ma
nually. Otherwise, the mechanism construction may b
e
harmed to some degree.
3
CAUTION:
MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEV
ER THIS MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZA
RDOUS RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER
CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PR
OCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. RE
FER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO N
OT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND
ANNOYING INTERFERENCE, USE
ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
Region Management Information
Region Management Information: This Mobile DVD Play
er is designed and manufactured to respond to the
Region Management Information that is recorded on a
DVD disc. If the Region number described on the
DVD disc does not correspond to the Region number o
f this Mobile DVD Player, this Mobile DVD Player
cannot play this disc.
SAFETY INFORMATION
4
DISC NOTES
Disc formats supported by this player
DVD
12 cm disc
(Single-sided disc only)
Video CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
Handling and Cleaning
Dirt, dust, scratches and warping discs will cause wrong operation.
Do not place stickers or make scratches on discs.
Do not warp discs.
A disc should always be kept in its case when not
in use to prevent from damage.
Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
4. On the seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc is quite dirty, using a soft cloth slightly dip with isopropyl
(rubbing) alcohol. Never use solvents such as benzi
ne, thinner or conventional record cleaners as they
may
mar the surface of the disc.
Note:
A disc may become somewhat scratched (although not
enough to make it unusable) depending on the way it
is handled and conditions in the usage environment.
Note these scratches are not an indication of any
problem with the player.
TM
5
DISC NOTES
Preparing New Discs with Rough Spots
A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the
proper setting will not be performed and the player
will not play the disc. Therefore, remove the roug
h edges
in advance by using a ballpoint pen or pencil as sh
own on the right. To remove the rough edges, press
the
side of the pen or pencil against the inside and ou
tside edges of the disc.
6
INSTALLATION
Notes:
Choose the mounting location where the unit
will not interfere with the normal driving function
of the driver.
Before finally installing the unit, connect the
wiring temporarily and make sure it is all
connected up properly and the unit and the
system work properly.
Use only the parts included with the unit to
ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation
requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the
driver’s way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
If installation angel exceeds 30°from horizontal,
the unit might not give its optimum
performance.
Avoid installing the unit where it would be
subject to high temperature, such as from direct
sunlight, or from hot air, from the heater, or
where it would be subject to dust, dirt or
excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from “Front”
(conventional DIN Front-mount) or “Rear” (DIN
Rear-mount installation, utilizing threaded screw
holes at the sides of the unit chassis). For details,
refer to the following illustrated installation met
hods.
TAKE OUT SCREW BEFORE
INSTALLATION
Before install the unit, please remove the two
screws.
DIN FRONT-MOUNT (Method A)
Installation Opening
This unit can be installed in any dashboard having
an opening as shown below:
Installing the unit
Be sure you test all connections first, and then
follow these steps to install the unit.
1. Make sure the ignition is turned off, and then
disconnect the cable from the vehicle battery’s
negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Press the release button on the front panel and
remove the control panel (see the steps of
“removing the front panel”).
4. Lift the top of the outer trim ring then pull it
out to
remove it.
5. The two supplied keys release tabs inside the
unit’s sleeve so you can remove it. Insert the
keys as far as they will go (with the notches
facing up) into the appropriate slots at the
middle left and right sides of the unit. Then slide
the sleeve off the back of the unit.
30
Take out screw
before installation.
7
6. Mount the sleeve by inserting the sleeve into th
e
opening of the dashboard and bend open the
tabs located around the sleeve with a
screwdriver. Not all tabs will be able to make
contact, so examine which ones will be most
effective. Bending open the appropriate tabs
behind the dashboard to secure the sleeve in
place.
Tabs
Screwdriver
Sleeve
Dashboard
7. Reconnect the wire harness and the antenna
and be careful not to pinch any wires or cables.
8. Slide the unit into the sleeve until it locks into
place.
9. To further secure the unit, use the supplied
metal strap to secure the back of the unit in
place. Use the supplied hardware (Hex Nut
(M5mm) and Spring Washer) to attach one end
of the strap to the mounting bolt on the back of
the unit. If necessary, bend the metal strap to fit
your vehicle’s mounting area. Then use the
supplied hardware (Tapping Screw
and Plain Washer) to attach the other end of
metal strap to a solid metal part of the vehicle
under the dashboard. This strap also helps
ensure proper electrical grounding of the unit.
Note to install the short threading terminal of the
mounting bolt to the back of the unit and the
other long threading terminal to the dashboard.
Mounting Bolt
Spring Washer
Plain Washer
Tapping Screw
Hex Nut
Metal Strap
10. Reconnect the cable to the vehicle battery’s
negative (-) terminal. Then replace the outer trim
ring and install the unit’s front panel (see the
steps of “installing the front panel”).
Removing the unit
1. Make sure the ignition is turned off, then
disconnect the cable from the vehicle battery’s
negative (-) terminal.
2. Remove the metal strap attached the back of the
unit (if attached).
3. Press the release button to remove the front
panel.
Lift the top of the outer trim ring then pull it out to
remove it.
4. Insert both of the supplied keys into the slots
at
the middle left and right sides of the unit, then p
ull
the unit out of the dashboard.
Outer Trim Ring
Front Panel
L Key
Sleeve
R Key
INSTALLATION
8
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow these
mounting instructions.
Use the screw holes marked T (Toyota), N (Nissan)
located on both sides of the unit to fasten the uni
t to
the factory radio mounting brackets supplied with
your vehicle.
Dashboard or Console
Screw
Factory Radio
Mounting Bracket
Side View showing
Screw Holes marked
T, N
Screw
To fasten the unit to the factory radio mounting
brackets.
Align the screw holes on the bracket with the screw
holes on the unit, and then tighten the screws
(5x5mm) on each side.
Note: the outer trim ring, sleeve and the metal str
ap
are not used for method B installation.
INSTALLATION
9
To Detach the Front Panel
1. Press the release button , then the right-han
d
side of the panel will be ejected.
2. Remove the front panel by pulling its left-hand
side outward.
3. For safekeeping, you can store the front panel
into the case after being removed.
To Reinstall the Front Panel
1. Push the front panel into the main body. A ‘click’
sound should be heard.
2. Note that if the front panel fails to lock in po
sition
properly, press control button may not function
and TFT display may be missing some segments.
Pressing the release button and then reinstall the
front panel again.
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display or control
buttons when detaching or re-installing the front
panel.
3. Do not touch the contacts on the front panel or
on the main unit body. It may result in poor
electrical contact.
4. If any dirt or foreign substances adhered on the
contacts, they can be removed with a clean and
dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight in anywhere.
6. Keep away any volatile agents (e.g. benzene,
thinner, or insecticides) from touching the
surface of the front panel.
7. Do not attempt to disassemble the front panel.
USING THE DETACHABLE FRONT PANEL
10
CONNECTIONS
Line No.
Line color Function (terminal color)
1 Black Auxiliary input right (RED)
2 Black Auxiliary input left (WHITE)
3 Black Auxiliary video input (YELLOW)
4 Green Rearview input (YELLOW)
5 Grey Video output 1 (YELLOW)
6 Grey Video output 2 (YELLOW)
7 Grey Rear RCA out right (RED)
8 Grey Rear RCA out left (WHITE)
9 Brown Front RCA out right (RED)
10 Brown Front RCA out left (WHITE)
11
LOCATIONS AND FUNCTION OF THE PLAYER
1. (power on/off button): Press to turn the unit on/o
ff.
2. MOD: Press to select the desired mode, such as D
VD, RADIO, AUX in … etc.
3. (Mircorphone optional for BT): For this unit wit
hout Bluetooth function, it is invalid.
4. LOU/AF: Press shortly to switch loudness on or o
ff.
Press it for several seconds to switch AF mode on o
r off in RDS mode.
5. SEL: Repeatedly press to select the audio mode t
o adjust, such as VOL, BASS, TREB, BAL,
FADE.
6. +: Press to increase the volume level.
7.
: Press to play/pause the playback.
8. RST: Reset button.
9. AUX: You can connect the auxiliary device throug
h this jack.
10. : Press to turn the monitor up to the desired
position to your need and turn the monitor
down to normal position.
11. -: Press to decrease the volume level.
12. 4.3 inch TFT monitor: display the current infor
mation on the screen.
13. IR (remote sensor): receive signal from the rem
ote control to control the unit.
14. : Press to mute the sound, press it again to
resume the sound.
15.
: Press to eject the disc that in the disc slot of
the unit.
16.ST/PTY: Press it shortly to select mono or stereo mode in radio mode.
Press it for several seconds to select P
TY programs in RDS mode.
17. EQ: Press to set the equalization mode.
18&19.
/ : Seek the radio stations, select the track backwa
rd/forward, how to operation
please refer to the contents below.
20. BND/TA: Press it shortly to select radio band m
ode.
Press it for several seconds to select
TA on or off in RDS mode.
21. (panel release button): Press to release th
e front panel.
22. USB interface: Provide the interface for USB pl
ayer.
12
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL
13
1.
Press it to turn on the unit. When the unit is on,
press it to turn the unit off.
2. MODE
When the unit is on, press it to select the differe
nt
mode, such as RADIO, DVD, AUX in, USB/Card
mode.
For your need, some modes are for optional.
3. BND/SYS
In radio mode, press it shortly to select the
desired band, such as FM1, FM2, FM3, AM1
(MW1) and AM2 (MW2).
In DVD mode, press to change between AUTO,
NTSC and PAL.
4.
/ , /
In case of menu mode, the buttons served as
cursor buttons to select item left/right, up/down.
5. ENTER
Press to confirm your selection.
6.
In DVD/USB/Card mode, press it to stop the play
and return to the DVD logo.
7. AMS/RPT
In radio mode, press to activate auto seek/preset
store function.
In media play mode, press to switch the repeat
mode of programs.
8. ST/PROG
In media play mode, press to enter into program
mode to play the track in your desired sequence.
In radio mode press to set the reception between
mono mode or stereo mode.
9. LOC/RDM
Press to play all tracks in random order.
In radio mode, press it shortly to select betwee
n
local and distant stations.
10. VOL+/VOL-
Press to increase/decrease the volume level.
11. PBC
It can be used to change between PBC ON and
PBC OFF on the VCD disc.
12. OSD
In media play mode, press to display OSD (the
on-screen display) information.
13. 0-9
Numeric buttons.
14.
Press to play/pause the playback.
15.
Press to mute the sound, press it again to resume
the sound.
16. Title
Press to display the title menu of the DVD disc.
17. Sub-T
Press to display the subtitle information of the
DVD disc.
18. Setup
In media play mode, press to enter into the DVD
setup menu.
19. Angle
Press to change the view angle on multi-angle
DVD disc.
20. Slow
For some discs, press to start slow forward
function.
21. ZOOM
Press to allow the picture to be increased in siz
e.
22. SEL
Press to enter into the audio selection mode, suc
h
as VOL, BASS, TREB, BAL, FADE.
23. SEEK-
/ SEEK+
Press shortly to skip to the previous/next track.
Press and hold it to activate fast reverse/forwar
d
function.
In radio mode, press it shortly to search the
frequency backward/forward manually. Press and
hold it to seek the frequency automatically.
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL
14
24. Audio
Press to display the audio information of the
DVD/VCD disc.
25. 10+
Digital selecting button for track, cooperatively
used with numeric buttons.
26. GOTO
GOTO (Disc search button) used in media play
mode, cooperatively used with numeric buttons.
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure that the
positive and negative terminals of the batteries
are oriented as indicated.
3. Close the cover.
Battery: One button cell lithium
battery (CR2025).
Using the Remote Control
Point the remote control towards the remote control
signal receiver on the player front face.
Operation angle: About
±
30 degree in each the
direction of the front of the remote sensor.
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL
15
BASIC OPERATION
TURNING ON/OFF THE UNIT
Press button on the front panel or on the remote control to turn the unit on. When the unit is on, press
button on the front panel or on the remote control will turn the unit off.
PANEL RELEASE/REINSTALL/ANGLE ADJUST
To Release the Front Panel
Press the release button on the front panel, then the right-hand side of the panel will be ejected. Remove
the front panel by pulling its left-hand side outward. For safekeeping, you can store the front panel into the
case after being removed.
To Reinstall the Front Panel
Push the front panel into the main body from the left position then the right position. A ‘click’ sound should be
heard. Note to let the front panel lock in position properly.
To adjust the angle of the Front Panel
The front panel can be adjusted to the desired position to your need by using button on the front panel.
You can also press button to turn the front panel down to the normal position.
SOUND ADJUSTMENT
Repeatedly press SEL button on the front panel of the unit or on the remote control to select the desired
adjustment mode. The adjustment mode will change in the following order:
VOL BASS TREB BAL FADE BRI CONT COL
After selecting your desired mode, you can adjust the current mode being displayed by using +/- buttons on
the front panel or VOL+/VOL- buttons on the remote control. Note: When P-EQ mode is activated (not in
EQ OFF mode), press SEL button to select the modes. And Bass /Treble modes are invalid. (Shown as
below)
VOL BAL FADE BRI CONT COL
REMOTE SENSOR
There is a remote sensor IR on the front panel. You can point the remote control to the remote sensor and
press functions keys on the remote control to control the unit.
Note to operation it within the certain operation angle.
VOLUME LEVEL ADJUSTMENT
Pressing the volume +/- buttons on the front panel of the unit or VOL+/VOL- buttons on the remote control to
adjust the volume level. You can also adjust the volume level by tapping the volume bar displayed on the
screen.
MUTE FUNCTION
Pressing button on the front panel or on the remote control will mute the sound. Press it again will
resume the sound.
16
MODE SELECTION
Press
MOD
button on the front panel or
MODE
on the remote control to select the desired mode t
o enjoy.
BRAKE FUNCTION
If the brake wire (pink wire) isn’t connected to th
e ground (when driving), the picture will not be sh
own on the
screen in DVD/AUX in mode for safety purpose. Only
the audio will be heard.
Note: Only when parking, the DVD/AUX in picture can
be seen on the screen. When driving, the warning
information will be displayed.
RESET FUNCTION
The reset button
RST
is on the front panel of the unit.
It must be activated with either a ballpoint pen or
thin metal object. The reset button is to be activ
ated for the
following reasons:
1. Initial installation of the unit when all wiring
is completed.
2. All the function buttons do not work.
3. Error symbol on the display.
BASIC OPERATION
17
MENU OPERATION
MAIN MENU
When the unit is on, the following picture will app
ear. If in other mode, press return icon on the rig
ht-top of the
screen to return to the main menu.
Click the different icon on the interface to enter
into the desired mode. The following contents will
introduce
the different functions the unit provides.
Note: Click some icons will be invalid if the unit doesn’
t with the function. For example IPOD function, GPS
function. If there isn’t any disc in the disc slot,
click [DVD] will be invalid.
1. RADIO OPERATION
In the main menu click [RADIO] icon to enter into t
he radio interface:
(1) (2)
Touch the right zone position or the other black zo
ne except the operation icons in interface (1) to e
nter into
the following picture (2):
※ BAND --- Click BAND icon to select the different band.
You can also press
BND/TA
button on the front panel or
BND/SYS
on the remote control to select
desired band. The reception band will change in the
following order: FM1
FM2
FM3
AM1
(MW1)
AM2 (MW2).
※
/ --- click to select channel downward or upward man
ually.
Press
/ buttons on the remote control or click / on the screen to adjust frequency
manually.
During radio mode, hold press
/ on the remote control or / icons on the screen to activate
automatic seek function. The frequency is updated c
orrespondingly on display.
※
MUT--- click to mute or resume the sound.
※
LOUD--- click to switch loudness on or off.
18
※
APS--- click to start automatic memory storing/prog
ram scanning function.
- Automatic memory storing
Press and hold
AMS
button on remote control or
APS
icon about several seconds, the radio searches
from the current frequency and checks the signal strength until one cycle search is finished. And then
stations are stored into the preset number button i
n turn according to the strength of the stations. W
hen
auto seek is finished, it will enter into preset sc
an mode automatically.
- Program scanning
Shortly press
AMS
button or
APS
icon to scan all station presets saved in memory.
And it will hold at
each station for several seconds.
※
STATION STORING
The preset
buttons (numeric buttons 1~6) on remote control and
M1
~
M6
bar displayed on touch screen
can be used to store 6 stations in each band for co
nvenient access to your favorite stations. The stat
ions
might be FM1, FM2, FM3, AM1 (MW1), AM2 (MW2) band. The operation is as below:
Programming stations
1.
Select the desired band, then tune in the station y
ou want to store in memory.
2.
Press and hold one of the preset buttons or
M1
~
M6
bar for several seconds, the current station
will be stored to the location button. Repeat steps
1. and 2. to program additional stations.
Quick tuning
Select the desired band, then press one of the six
preset buttons on
remote control or tap
M1
~
M6
bar displayed on screen will retrieve the correspo
nding station which
had been stored in the memory.
※
MONO/STEREO
You can press
ST
button on remote control or click ST icon on the s
creen to select mono or stereo
mode. You can sometimes improve reception of distan
t stations by selecting mono operation.
※
LOCAL/DISTANCE
Press
LOC
button on the remote control or click LOC icon on t
he radio menu to select between local
and distant stations.
Local setting for reception of strong station, and
a distant setting for reception of weaker stations.
When search station in local mode, if there is no s
tation available, it will switch to distant mode an
d
search station automatically. If there is no statio
n available too it will stop searching and return t
o local
mode.
When search station in distant mode, if there is no
station available, it will stop searching in dista
nt
mode.
※
EQUALIZATION
EQ--- click to change the equalization mode, such a
s EQ OFF, POP, ROCK, CALS, JAZZ, FLAT and
VOCAL.
MENU OPERATION
19
※
RDS OPERATION
(1) (2)
Touch the right zone position or the other black zo
ne except the operation icons in interface (1) to e
nter
into the following picture (2):
a) Click
AF
icon on the screen or press
LOU/AF
button on the front panel for several seconds to s
witch
AF function on or off.
b) Click
TA
icon on the screen or press
BND/TA
button on the front panel for several seconds to s
witch
TA on or off. When TA on, the unit will search Traf
fic Announcement automatically. When received a
Traffic Announcement station, the unit will change
to the Traffic Announcement station automatically.
Click TA to exit TA mode.
c) Click PTY icon on the screen or press ST/PTY button on the front panel for several seconds to select
program.
PTY
icon
or
ST/PTY
button is operated as follows:
While selecting PTY engagement, its selection is implemented by preset buttons (M1-M6).
According to above two allotted group, the preset n
umber is used for
PTY
selection as follows:
MUSIC group:
M1: POP M, ROCK M
M2: EASY M, LIGHT M
M3: CLASSICS, OTHER M
M4: JAZZ, COUNTRY
M5: NATION M, OLDIES
M6: FOLK M
When PTY is selected, the radio starts to search co
rresponding PTY information, and stops if the
corresponding PTY information is detected.
If corresponding PTY information is not existed any
more, PTY engaging is automatically exit to
normal mode.
Notes:
AF: Alternative Frequencies
Frequency list of broadcasting stations transmitting the same program
SPEECH group:
M1: NEWS, AFFAIRS, INFO
M2: SPORT, EDUCATE, DRAMA
M3: CULTURE, SCIENCE, VARIED
M4: WEATHER, FINANCE, CHILDREN
M5: SOCIAL, RELIGION, PHONE IN
M6: TRAVEL, LEISURE, DOCUMENT
MENU OPERATION
20
TA: Traffic Announcement Identification
Identification data showing traffic information is
being transmitted or not
PTY: Program Type Code
Contents of programs such as news, light music, sports etc.
TP: Traffic Program Identification
Identification data for traffic information-broadca
sting station
※
--- Click the icon on the right-top of the screen
to return to the main menu interface.
2. DVD OPERATION
If there is no disc in the disc slot, in any mode i
nsert a disc into the disc slot, the unit will swit
ch to the DVD
mode, and play the disc automatically.
If there is a disc in the disc slot, press
MOD
button on the front panel or
MODE
button on the remote control
or tap [DVD] icon on the main menu to change the mo
de to DVD mode, then the unit will play the disc
automatically.
※
In the DVD interface, tap anywhere of the touch scr
een to display the DVD control interface, you can
operation it using these icons on the screen.
Press DISC icon the left-top of the screen to d
isplay the following picture:
※
DVD VIDEO MENU PLAY
When playing a DVD disc in the DVD player:
1) The disc will be played automatically and stop a
t menu picture.
Use
/ , / cursor buttons on the remote control or click / , /
icons on
the screen to move between the highlight bars in the menu.
2) Press
ENTER
button on the remote control or click OK icon on t
he touch screen to confirm the selected
item.
MENU OPERATION
21
3) You can press
Title
button on the remote control or TIT icon on the sc
reen to return to the title of the
DVD disc.
※
EJECTING A DISC
Press
on the front panel to eject the disc.
※
STOP PLAYBACK
Press
button on the remote control or STOP on the screen
one time to stop the playback and go
back to the DVD LOGO. Then click
on the screen or press
on the remote control to start play.
※
SKIP TO THE PREVIOUS/NEXT TRACK
During playing, click
/ on the screen or press / buttons on the remote control during
playback will skip to the previous/next track.
Note:
For some VCD2.0 discs (PBC-playback control),
/ buttons or /
icons may be
unavailable.
Note you can use the numeric buttons (0-9) and 10+
button on the remote control to select the track
directly.
※
PAUSING PLAY/STEP PLAY
Press
on the remote control during playback will stop pl
ayback temporarily. To return to normal
playback, press
on the remote control.
※
RAPID FORWARD/RAPID REVERSE
Hold press
/ on the screen or hold press / on the remote control during playback.
Each time the button is pressed, the speed of rapid
forward /reverse changes according to the disc as
follows.
DVD/VCD/CD/MP3:
Normal playback X2 X4 X8 X20
※
SLOW MOTION PLAYBACK
Press
SLOW
on the remote control during play. Each time the b
utton is pressed,
the speed of slow forward (SF) changes according to
the disc as follows.
DVD: Normal playback
→
SF1/2
→
SF1/3
→
SF1/4
→
SF1/5
→
SF1/6
→
SF1/7
In slow motion state, click PLAY icon on the screen or press
on the remote control, normal playback
to recover normal playback.
※ PBC MENU PLAYBACK OF VCD/SVCD
For some VCD or SVCD discs, there is a menu in orde
r to select the desired
contents. This menu is called PBC (Playback Control
) menu.
Press
PBC
button on the remote control to change between PBC
ON and PBC OFF on the disc.
In PBC ON mode, REPEAT, RANDOM, PROGRAM and GOTO fu
nctions are unavailable.
MENU OPERATION
22
※
ON-SCREEN DISPLAY FUNCTION
Press the
OSD
button on the remote control or click OSD icon on t
he screen during playback to display the
console information of the current disc on the scre
en.
For an example (when playing a DVD disc):
Once you press
OSD
button on the remote control or click OSD icon on
the screen you will see the
information as the following order.
1) Item: TT
Function: Display the current title number and tota
l title number.
2) Item: CH
Function: Display the current chapter number and to
tal chapter number.
3) Item:
(This icon only displayed for several seconds, afte
r several seconds it will disappeared.)
Function: Display the played time of the current ch
apter.
4)
C-:
Display the remaining time of the current chapter.
5)
T:
Display the played time of the current title.
6)
T-:
Display the remaining time of the current title.
7)
C:
Display the played time of the current chapter.
8)
Display the current disc’s language, audio type, su
btitle language and play angle.
Note: The displayed information is different according to different type of discs.
※
REPEAT PLAY
Repeat play: when you want to repeat playing the wh
ole disc or a track or a chapter in the disc.
Press
RPT
button on the remote control repeatedly to select
different repeat modes.
For different kinds of discs, pressing
RPT
button has different effects.
For example:
DVD:
REP:[OFF] REP:[CHAPTER] REP:[TITLE] REP:[ALL]
MP3:
REP:[OFF] REP:[REP ONE] REP:[REP DIR] REP:[REPALL]
Note: REPEAT feature does not support VCD2.0 (with PBC ON).
※ RANDOM PLAY
Click
RDM
icon on the screen or press
RDM
button on the remote control switch between random
on or
off. When random on, it will play the tracks or pro
grams on random order.
MENU OPERATION
23
※
GOTO FUNCTION
FOR DVD:
Press
GOTO
button on the remote control, the screen will disp
lay the information as followed:
Use the numeric buttons and
/ buttons to move the cursor position to input the d
esired Title,
Chapter or Time, then press
ENTER
button on the remote control to confirm.
FOR VCD (WITH PBC OFF)/CD:
You can input the Track and Time then press
ENTER
to confirm.
※
ZOOM FUNCTION
Allows the picture to be increased in size. Press
ZOOM
button on the remote control to toggle among 2
scale, 3 scale and 4 scale, 1/2 scale,1/3 scale, 1/
4 scale.
When the scale is 1/4 times, press
ZOOM
button again to cancel the zoom function.
ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1/2
ZOOM OFF ZOOM 1/4 ZOOM
1/3
During Zoom mode, press / , / buttons on the remote control to move pictures up,
down,
left or right direction.
※
SPECIAL FUNCTIONS FOR DVD
Multi-subtitle Language Function
Press
Sub-T
on the remote control or click S-T icon on the scre
en during playback. The corresponding
information will be shown on the screen.
Each time the button is pressed, the subtitle langu
age changes in sequential order.
Notes:
- The language number is different according to t
he disc.
- Some discs only contain one subtitle language.
Multi-audio Language Function
Press
Audio
on the remote control or click L-R icon on the scr
een during playback. The corresponding
information will be shown on the screen.
Each time the button is pressed, the audio soundtra
ck language changes on sequential order.
Notes:
- The language number is different according to the disc.
- Some discs only contain one soundtrack language
.
Multi-angle Function
Press
Angle
button on the remote control during playback. The
corresponding information will be shown on
the screen.
Each time the button is pressed, the angle changes in sequential order.
Notes:
- The angle number is different according to the
disc.
- The function only works for discs having scenes recorded at different angles.
-
MENU OPERATION
24
Loading...