Marmitek X-10, ABX1, X-10 ABX1 User Manual
Marmitek X-10
ABX1
Gebruiksaanwijzing 5
User Guide 19
3
ABX1 Learning RF
Universal Remote 8in1
Button layout
23
1
32
24
4
6
8
5
7
9
11
15
13
17 - 22
25
26
10
16
14
12
General Security Note
Attention:
For carefree and safe use of this product, please read this
manual and safety information carefully and follow the
instructions. Technical manipulation of the product or any
changes to the product are forbidden, due to security and
approval issues. Please take care to set up the device
correctly - consult your user guide. Children should use the
device only under adult supervision.
Important: the Marmitek X-10 remote control must be used
according the instructions in this manual and is not suitable for
other purposes.
Avoid the following
• strong mechanical wear and tear
• high temperature
• strong vibrations
• high humidity
Please also respect the additional security notes in the
various user guide chapters. To ensure correct set up please
read the manual and security notes carefully.
Battery install and change
The device may only be used with 2 AAA alkaline batteries never try to connect to another power supply. When
inserting batteries be sure the right polarity is used. Remove
the batteries when the device is not used for a longer period.
Make sure that the batteries are not short circuited and are
not disposed in fire (danger of explosion). Batteries do not
belong in children hands. Don't let batteries lay around
openly - they might be swallowed by children or animals. If
this happens see a doctor immediately.
Disposal of batteries:
Batteries are special waste and do not belong in general
household waste disposal. Leaking or damaged batteries
can upon contact with skin cause burning or acid damage if necessary use suitable gloves.
Please dispose of batteries in accordance with local bylaws.
Contents
1. Introduction
2. Insert the batteries
3. Function of the remote's buttons
4. Programming
4.1 Marmitek X-10 Automation Control
4.2 Manual code entry
4.3 Automatic code search for some well-known brands
4.4 Automatic code search for all brands
4.5 Manual code search
4.6 Learning codes
4.7 Identifying codes found
4.8 Default Volume Control for satellite
4.9 Home Theatre Macro Feature
5. Troubleshooting
19
English
English
Quick start guide
1) Put the batteries in
1. Open the cover on the back of the 8 in 1 Universal
Remote Control
2. Insert 2 batteries (AAA alkaline). Make sure the batteries
are NEW.
2) Program your 8 in 1 Universal Remote Control
1. Turn on the equipment that you wish to control (TV, VCR,
etc).
2. The AUX key allows you to program and control any
equipment such as TV, VCR, Dx
3. Take the code book supplied with the 8 in 1 Universal
Remote Control and find the brand of the equipment you
wish to control. E.g. if you have a Thomson TV look for
Thomson under the TV section.
4. Press and hold on the key marked SETUP (8) until the
LED (2) stays permanently on. This takes about 3 seconds.
Release the SETUP key.
5. Press and release the TV, VCR, CBL, DVD, etc. in
accordance with the appliance you wish to control.
6. From the code book take the first number corresponding
to your equipment and enter the number by pressing the 0-9
key pad (9). Each time you press a key the red LED (2) will
flash.
7. If the number is correctly entered the LED will turn off. If
the number is incorrect then the LED will flash fast. If
incorrect you will need to restart at 4.
Press the
X
POWER key (1) . If your equipment switches off
you have found the right code. If it does not switch off, you
will need to restart from 4.
Sometimes there are several codes that have similar
features. If you find that your 8 in 1 Universal Remote
Control does not work for some functions, you may need to
try another code.
20
1. Introduction
The Marmitek X-10 remote control is designed to control up
to 8 devices: TV, VCR, CBL (decoder, set top box), DVD, CD,
SAT (satellite receiver), or any other device. The Marmitek X10 remote contains a library of codes that are
preprogrammed into the remote control. This library covers
nearly all the audio video products on the market today. The
codes have to be
programmed once before use. This can be done in different
ways:
a. Manual entry of one of the codes displayed under the
related brand and type of equipment in the attached code
book (see 4.1)
b. Automatic code search for some well-known brands (4.2)
c. Automatic code search for all brands (4.3)
d. Manual search through all codes (4.4)
Marmitek X-10 Automation: control all electrical appliances
with one remote control
The Marmitek X-10 Remote has two transmitters: an infrared
(IR) transmitter and a radio frequency (RF) transmitter. This
allows you to operate practically anything. You can operate
your TV, video etc. with the infrared (IR) technology. The
Marmitek X-10 radio frequency (RF) technology makes it
possible to operate lights and appliances from anywhere in
the home.
Here are some examples of the uses of the Marmitek X-10
Automation feature:
• Dim the lights and switch them on and off while
watching TV.
• Turn the coffee machine on from your bedroom when you
wake up in the morning.
• Turn your lights on at night to scare off intruders when
you hear noises.
• Switch on your electric blanket before the movie ends, so
you can enjoy a warm bed once the movie is finished.
• Switch everything off with a single press of a button
when you go to bed.
2. Insert the batteries (always use new AAA alkaline
batteries).
1. Open the cover on the back of the Marmitek X-10 Remote.
2. Insert 2 AAA alkaline batteries, verify that they are placed
correctly with the + on the battery in the same position as
marked inside the battery compartment.
3. Close the battery compartment carefully.
21
Loading...